🇨🇿 Hexagon Manufacturing Intelligence Czech Republic s.r.o. PL

ČIA 2397 • Praha 8, Czech Republic • 23 calibration items

Metrology & calibration

Hexagon Manufacturing Intelligence Czech Republic s.r.o. is a calibration laboratory accredited by ČIA under number 2397 (Praha 8, Czech Republic). Its accreditation scope covers 23 calibration items in the following areas: Metrology & calibration. Calibrated items include: Laser trackers, Measuring arms, Coordinate measuring machines, Optical measuring machines with a multisensor. Most frequently used calibration principles: Measurement using a calibration ball, Measurement using a step gauge, Comparison with a reference laser tracker.

At a glance

Accreditation number: ČIA 2397
Calibration items in scope: 23
Types of calibrated items: 5
Calibration principles used: 14
City: Praha 8, Czech Republic
Valid until: 28-11-2030

Accreditation number: 2397
Accreditation body: ČIA
Address: Boudníkova 2538/13, Libeň, 180 00 Praha 8
City: Praha 8, Czech Republic
Division: Laboratorium wzorcujące
Valid until: 28-11-2030

What this laboratory calibrates (5)

Laser trackers — 8 calibration items
Measuring arms — 6 calibration items
Coordinate measuring machines — 4 calibration items
Optical measuring machines with a multisensor — 3 calibration items
Coordinate measuring machines with a laser sensor — 2 calibration items

Calibration principles (14)

Measurement using a calibration ball — 8 calibration items
Measurement using a step gauge — 3 calibration items
Comparison with a reference laser tracker — 1 calibration item
Glass ruler measurement — 1 calibration item
Laser interferometer measurements — 1 calibration item
Measurement by self-calibration procedure — 1 calibration item
Measurement using a reference plate by an optical sensor (scanning) — 1 calibration item
Measurement using a scale bar — 1 calibration item
Measurement using white plate standard — 1 calibration item
Measurement with parallel gauge blocks — 1 calibration item
Measurement with parallel gauge blocks and step gauge — 1 calibration item
Multi-position measurement with a switching tactile probe — 1 calibration item
Rubidium frequency standard measurement — 1 calibration item
Two face measurement by reflector — 1 calibration item

Laboratory sections (3)

Workplace Prague — 19 calibration items
Workplace Bratislava — 2 calibration items
Workplace Budapest — 2 calibration items

Laboratory locations

Hexagon Manufacturing Intelligence Czech Republic s.r.o. (main site) — Boudníkova 2538/13, Libeň, 180 00 Praha 8
Pracownia Praga — Boudníkova 2538/13, Libeň, 180 00 Praha 8
Pracownia Bratysława — Tuhovská, 831 06 Bratislava – Vajnory
Pracownia Budapeszt — Nagytétényi út 112, 1222 Budapest

Certificate information

Certificate date: 23.09.2026

Accreditation scope — calibration items (23)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Workplace Prague
1	Coordinate measuring machines	Calibration – length Spatial length — 0 m to 6 m · CMC (0,25·L + 0,25) µm CMC for the field of measured quantity: Length	Measurement with parallel gauge blocks and step gauge	KP1 – SMS1
2	Coordinate measuring machines	Calibration – length Sensing system error — 0 mm to 1 mm · CMC 0,1 µm CMC for the field of measured quantity: Length	Measurement using a calibration ball	KP1 – SMS1
3	Coordinate measuring machines	Calibration – length Spatial length — 0 m to 30 m · CMC (0,5·L + 0,06) µm CMC for the field of measured quantity: Length	Laser interferometer measurements	KP2 – SMS2
4	Coordinate measuring machines	Calibration – length Sensing system error — 0 mm to 1 mm · CMC 0,1 µm CMC for the field of measured quantity: Length	Measurement using a calibration ball	KP2 – SMS2
5	Coordinate measuring machines with a laser sensor	Calibration – length Dimension sensing — 10 mm to 50 mm · CMC 1,9 µm CMC for the field of measured quantity: Length	Measurement using a calibration ball	KP5 – LASER
6	Coordinate measuring machines with a laser sensor	Calibration – length Sensing of shape and scatter of sensing — 0 mm to 1 mm · CMC 2,0 µm CMC for the field of measured quantity: Length	Measurement using white plate standard	KP5 – LASER
7	Optical measuring machines with a multisensor	Calibration – length Spatial length — 0 mm to 600 mm · CMC (1,1·L + 0,3) µm CMC for the field of measured quantity: Length	Measurement with parallel gauge blocks	KP3 – OPTIKA
8	Optical measuring machines with a multisensor	Calibration – length Spatial length — 0 mm to 600 mm · CMC (0,2·L + 0,2) µm CMC for the field of measured quantity: Length	Glass ruler measurement	KP3 – OPTIKA
9	Optical measuring machines with a multisensor	Calibration – length Sensing system error — 0 mm to 1 mm · CMC 0,1 µm CMC for the field of measured quantity: Length	Measurement using a calibration ball	KP3 – OPTIKA
10	Measuring arms	Calibration – length Spatial length — 0 m to 4,5 m · CMC (2,1·L + 1,2) µm CMC for the field of measured quantity: Length	Measurement using a step gauge	KP4 – RAMENA; ČSN EN ISO 10360-12; STN EN ISO 10360-12; MSZ EN ISO 10360-12; EN ISO 10360-12
11	Measuring arms	Calibration – length Form sensing deviation — 0 mm to 1 mm · CMC 1,0 µm Size sensing deviation — -1 mm to 1 mm · CMC 1,0 µm Position sensing deviation — 0 mm to 1 mm · CMC 1,0 µm CMC for the field of measured quantity: Length	Measurement using a calibration ball	KP4 – RAMENA; ČSN EN ISO 10360-12; STN EN ISO 10360-12; MSZ EN ISO 10360-12; EN ISO 10360-12
12	Laser trackers	Calibration – length Distance measurement deviation; length 1,5 m to 53 m — -0,05 mm to 0,05 mm · CMC 5 µm CMC for the field of measured quantity: Length	Comparison with a reference laser tracker	KP7 – TRAKČNÍ LASER 2; ČSN EN ISO 10 360-10; EN ISO 10 360-10
13	Laser trackers	Calibration – length Two face measurement deviation; length 1,5 m to 53 m — -0,4 mm to 0,4 mm · CMC 6 µm CMC for the field of measured quantity: Length	Two face measurement by reflector	KP6 – TRAKČNÍ LASER 1; KP7 – TRAKČNÍ LASER 2; ČSN EN ISO 10 360-10; EN ISO 10 360-10
14	Laser trackers	Calibration – length Spatial length deviation in probe sensing; length 1,5 m to 25 m — -0,5 mm to 0,5 mm · CMC 12 µm Spatial length deviation in reflector sensing; length 1,5 m to 25 m — -0,5 mm to 0,5 mm · CMC 9 µm CMC for the field of measured quantity: Length	Measurement using a scale bar	KP6 – TRAKČNÍ LASER 1; KP7 – TRAKČNÍ LASER 2; ČSN EN ISO 10 360-10; EN ISO 10 360-10
15	Laser trackers	Calibration – length Size sensing deviation; length 2 m to 20 m — -0,2 mm to 0,2 mm · CMC 6 µm Form sensing deviation; length 2 m to 20 m — 0 mm to 0,4 mm · CMC 8 µm CMC for the field of measured quantity: Length	Measurement using a calibration ball	KP7 – TRAKČNÍ LASER 2; ČSN EN ISO 10 360-10; EN ISO 10 360-10
16	Laser trackers	Calibration – length Plane sensing deviation; length 2 m to 20 m — 0 mm to 0,5 mm · CMC 12 µm CMC for the field of measured quantity: Length	Measurement using a reference plate by an optical sensor (scanning)	KP7 – TRAKČNÍ LASER 2; ČSN EN ISO 10 360-10; EN ISO 10 360-10
17	Laser trackers	Calibration – length Orientation deviation; length 2 m to 10 m — 0 mm to 0,2 mm · CMC 10 µm CMC for the field of measured quantity: Length	Multi-position measurement with a switching tactile probe	KP7 – TRAKČNÍ LASER 2; ČSN EN ISO 10 360-10; EN ISO 10 360-10
18	Laser trackers	Calibration – length Distance offset; length 1,5 m to 15 m — -2,0 mm to 2,0 mm · CMC 7 µm CMC for the field of measured quantity: Length	Measurement by self-calibration procedure	KP6 – TRAKČNÍ LASER 1; KP7 – TRAKČNÍ LASER 2; ČSN EN ISO 10 360-10; EN ISO 10 360-10
19	Laser trackers	Calibration – length Absolute distance meter modulation frequency — 0 kHz to 25 MHz · CMC 0,75 Hz CMC for the field of measured quantity: Length	Rubidium frequency standard measurement	KP6 – TRAKČNÍ LASER 1; KP7 – TRAKČNÍ LASER 2; ČSN EN ISO 10 360-10; EN ISO 10 360-10
Workplace Bratislava
20	Measuring arms	Calibration – length Spatial length — 0 m to 4,5 m · CMC (2,1·L + 1,2) µm CMC for the field of measured quantity: Length	Measurement using a step gauge	KP4 – RAMENA; ČSN EN ISO 10360-12; STN EN ISO 10360-12; MSZ EN ISO 10360-12; EN ISO 10360-12
21	Measuring arms	Calibration – length Form sensing deviation — 0 mm to 1 mm · CMC 1,0 µm Size sensing deviation — -1 mm to 1 mm · CMC 1,0 µm Position sensing deviation — 0 mm to 1 mm · CMC 1,0 µm CMC for the field of measured quantity: Length	Measurement using a calibration ball	KP4 – RAMENA; ČSN EN ISO 10360-12; STN EN ISO 10360-12; MSZ EN ISO 10360-12; EN ISO 10360-12
Workplace Budapest
22	Measuring arms	Calibration – length Spatial length — 0 m to 4,5 m · CMC (2,1·L + 1,2) µm CMC for the field of measured quantity: Length	Measurement using a step gauge	KP4 – RAMENA; ČSN EN ISO 10360-12; STN EN ISO 10360-12; MSZ EN ISO 10360-12; EN ISO 10360-12
23	Measuring arms	Calibration – length Form sensing deviation — 0 mm to 1 mm · CMC 1,0 µm Size sensing deviation — -1 mm to 1 mm · CMC 1,0 µm Position sensing deviation — 0 mm to 1 mm · CMC 1,0 µm CMC for the field of measured quantity: Length	Measurement using a calibration ball	KP4 – RAMENA; ČSN EN ISO 10360-12; STN EN ISO 10360-12; MSZ EN ISO 10360-12; EN ISO 10360-12

Reference standards (13)

EN ISO 10 360-10

EN ISO 10360-12

KP1 – SMS1

KP2 – SMS2

KP3 – OPTIKA

KP4 – RAMENA

KP5 – LASER

KP6 – TRAKČNÍ LASER 1

KP7 – TRAKČNÍ LASER 2

MSZ EN ISO 10360-12

STN EN ISO 10360-12

ČSN EN ISO 10 360-10

ČSN EN ISO 10360-12

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2397