🇨🇿 Výzkumný ústav geodetický, topografický a kartografický, v.v.i. PL

ČIA 2292 • Zdiby, Czech Republic • 16 calibration items

Metrology & calibration

Výzkumný ústav geodetický, topografický a kartografický, v.v.i. is a calibration laboratory accredited by ČIA under number 2292 (Zdiby, Czech Republic). Its accreditation scope covers 16 calibration items in the following areas: Metrology & calibration. Calibrated items include: Dial indicators, Distance meters, length baselines, Feeler gauges, calibration foils, Gauges (spatial objects), squares, position (mutual position of two…. Most frequently used calibration principles: Measurement using parallel gauge blocks, Measurement using a baseline for angle and slope, Measurement using a micrometer calliper gauge.

At a glance

Accreditation number: ČIA 2292
Calibration items in scope: 16
Types of calibrated items: 16
Calibration principles used: 12
City: Zdiby, Czech Republic
Valid until: 24-10-2028

Accreditation number: 2292
Accreditation body: ČIA
Address: Ústecká 98, 250 66 Zdiby
City: Zdiby, Czech Republic
Division: Laboratorium wzorcujące
Valid until: 24-10-2028

What this laboratory calibrates (16)

Dial indicators — 1 calibration item
Distance meters, length baselines — 1 calibration item
Feeler gauges, calibration foils — 1 calibration item
Gauges (spatial objects), squares, position (mutual position of two or more points, vectors, planes) — 1 calibration item
Inclinometers — 1 calibration item
Laser scanners — 1 calibration item
Length line rules, end gauges, track gauges, levelling rods — 1 calibration item
Levelling instruments, rotating lasers (measurement of elevation) — 1 calibration item
Levels for machinery, builder's levels — 1 calibration item
Measuring wedges — 1 calibration item
Measuring wheels — 1 calibration item
Micrometer calliper gauges — 1 calibration item
Slide gauges — 1 calibration item
Straightedges for unevenness measurement (measurement of flatness) — 1 calibration item
Tape measures, roll-up rules and two-metre rules — 1 calibration item
and 1 more

Calibration principles (12)

Measurement using parallel gauge blocks — 3 calibration items
Measurement using a baseline for angle and slope — 2 calibration items
Measurement using a micrometer calliper gauge — 2 calibration items
0 m to 30 m: measurement using a laser interferometer; 30 m to 1500 m: measurement using a length baseline and total station (ČSN ISO 17123-4) — 1 calibration item
CMM measurement – with a laser tracker — 1 calibration item
Measurement using a caliper — 1 calibration item
Measurement using a laser interferometer — 1 calibration item
Measurement using a laser interferometer (ČSN ISO 8322-2) — 1 calibration item
Measurement using a levelling instrument and line scales — 1 calibration item
Measurement using a spatial test field (ISO 17123-9) — 1 calibration item
Measurement using an angle (azimuthal) baseline (ČSN ISO 17123-3) — 1 calibration item
Measuring using line scales (ČSN ISO 17123-2) — 1 calibration item

Certificate information

Certificate date: 24.10.2023

Accreditation scope — calibration items (16)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Tape measures, roll-up rules and two-metre rules	Calibration – length 0 m to 300 m · CMC Q[6·L; 22] μm CMC for the field of measured quantity: Length	Measurement using a laser interferometer (ČSN ISO 8322-2)	KP č. 1
2	Measuring wheels	Calibration – length 0 m to 1000 m · CMC Q[0,0001·L; 0,01] m CMC for the field of measured quantity: Length	Measurement using a caliper	KP č. 18
3	Slide gauges	Calibration – length 0 mm to 3000 mm · CMC 23 μm CMC for the field of measured quantity: Length	Measurement using parallel gauge blocks	KP č. 2
4	Levelling instruments, rotating lasers (measurement of elevation)	Calibration – length 0 m to 5 m · CMC Q[2·L; 10] μm CMC for the field of measured quantity: Length	Measuring using line scales (ČSN ISO 17123-2)	KP č. 3
5	Distance meters, length baselines	Calibration – length 0 m to 30 m · CMC Q[0,1·L; 0,2] mm 30 m to 1500 m · CMC Q[1,6·L; 0,2] mm CMC for the field of measured quantity: Length	0 m to 30 m: measurement using a laser interferometer; 30 m to 1500 m: measurement using a length baseline and total station (ČSN ISO 17123-4)	KP č. 5
6	Length line rules, end gauges, track gauges, levelling rods	Calibration – length 0 mm to 5000 mm · CMC Q[1,8·L; 18] μm CMC for the field of measured quantity: Length	Measurement using a laser interferometer	KP č. 7
7	Gauges (spatial objects), squares, position (mutual position of two or more points, vectors, planes)	Calibration – length 0 m to 250 m · CMC Q[8·L; 30] μm CMC for the field of measured quantity: Length	CMM measurement – with a laser tracker	KP č. 12
8	Feeler gauges, calibration foils	Calibration – length 0 mm to 25 mm · CMC 6 μm CMC for the field of measured quantity: Length	Measurement using a micrometer calliper gauge	KP č. 17
9	Measuring wedges	Calibration – length 0 mm to 32 mm · CMC 0,1 mm CMC for the field of measured quantity: Length	Measurement using a micrometer calliper gauge	KP č. 17
10	Straightedges for unevenness measurement (measurement of flatness)	Calibration – length 0 m to 4 m · CMC Q[0,02·L; 0,05] mm CMC for the field of measured quantity: Length	Measurement using a levelling instrument and line scales	KP č. 9
11	Micrometer calliper gauges	Calibration – length 0 mm to 200 mm · CMC 4 μm CMC for the field of measured quantity: Length	Measurement using parallel gauge blocks	KP č. 6
12	Dial indicators	Calibration – length 0 mm to 100 mm · CMC 5 μm CMC for the field of measured quantity: Length	Measurement using parallel gauge blocks	KP č. 6
13	Laser scanners	Calibration – length 0 m to 55 m · CMC Q[0,01·L; 1] mm CMC for the field of measured quantity: Length	Measurement using a spatial test field (ISO 17123-9)	KP č. 19
14	Theodolites, aero compasses	Calibration – plane angle horizontal direction — 0 gon to 400 gon · CMC 0,3 mgon horizontal angle — 0 gon to 400 gon · CMC 0,4 mgon zenith angle — 0 gon to 400 gon · CMC 0,5 mgon CMC for the field of measured quantity: Plane angle	Measurement using an angle (azimuthal) baseline (ČSN ISO 17123-3)	KP č. 4
15	Levels for machinery, builder's levels	Calibration – plane angle -1 ° to 1° · CMC 22″ CMC for the field of measured quantity: Plane angle	Measurement using a baseline for angle and slope	KP č. 8
16	Inclinometers	Calibration – plane angle -90 ° to 90 ° · CMC 22″ CMC for the field of measured quantity: Plane angle	Measurement using a baseline for angle and slope	KP č. 8

Reference standards (13)

KP č. 1

KP č. 12

KP č. 17

KP č. 18

KP č. 19

KP č. 2

KP č. 3

KP č. 4

KP č. 5

KP č. 6

KP č. 7

KP č. 8

KP č. 9

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2292