🇵🇱 HENKEL POLSKA Sp. z o.o. PL
水与废水
HENKEL POLSKA Sp. z o.o. 是由 PCA 认可的实验室，认可编号 AB 556（Stąporków，波兰）。认可范围涵盖 53 项检测方法，涉及以下领域：水与废水。检测对象包括：Masonry mortars、Adhesives、External thermal insulation systems、Floor screeds。最常用的技术：Pull-off method、Constant rate of loading method、重量法。
要点速览
- 认可编号: PCA AB 556
- 认可范围内方法数: 53
- 检测对象种类: 9
- 所用技术数: 17
- 城市: Stąporków, 波兰
- 认可编号
- AB 556
- 认可机构
- PCA
- 地址
- ul. Domaniewska 41, 02-672 Warszawa, CENTRALNE LABORATORIUM BADAWCZE, Stara Góra, 26-220 Stąporków
- 城市
- Stąporków, 波兰
该实验室检测什么 (9)
- Masonry mortars — 14 项方法
- Adhesives — 7 项方法
- External thermal insulation systems — 7 项方法
- Floor screeds — 6 项方法
- Plasters — 5 项方法
- Tile adhesives — 5 项方法
- Tile grouts — 4 项方法
- Paints, Primers — 3 项方法
- Reinforcing meshes — 2 项方法
所用检测技术 (17)
- Pull-off method — 8 项方法
- Constant rate of loading method — 6 项方法
- 重量法 — 6 项方法
- Graf-Kaufman method — 3 项方法
- Constant rate of force increase method — 2 项方法
- Flow table method — 2 项方法
- Air jet sieving method — 1 项方法
- Air jet sieving method; Wet sieving method — 1 项方法
- Böhme method — 1 项方法
- Deep abrasion method — 1 项方法
- Dry sieving method; Wet sieving method — 1 项方法
- Method A – pressure; Method B – alcohol — 1 项方法
- Penetrating rod method — 1 项方法
- Rolling wheel load method — 1 项方法
- Simulation method — 1 项方法
- 另有 2 项
认可范围 — 项检测方法 (53)
| 序号 | 检测对象 | 方法 / 参数 | 技术 | 依据文件 | |
|---|---|---|---|---|---|
| 检测方法 | |||||
| 1 | Tile adhesives | Slip | PN-EN 12004-2:2017-03 | ||
| 2 | Tile adhesives | Open time 范围 (0,1 – 18,0) kN |
Pull-off method | PN-EN 12004-2:2017-03 | |
| 3 | Tile adhesives | Initial adhesion Adhesion after water immersion Adhesion after ageing termicznym Przyczepność po cyklu zamrażaniarozmrażania 范围 (0,1 – 18,0) kN |
Pull-off method | PN-EN 12004-2:2017-03 | |
| 4 | Tile adhesives | Transverse deformation 范围 (0,2 – 40) mm |
Constant rate of loading method | PN-EN 12004-2:2017-03 | |
| 5 | Tile adhesives | Shear strength 范围 (0,1 – 20) kN |
Constant rate of loading method | PN-EN 12004-2:2017-03 | |
| 6 | Tile grouts | 耐磨性 范围 do 5000 mm3 |
Deep abrasion method | PN-EN 13888-2:2023-02 | |
| 7 | Tile grouts | 抗弯强度 范围 (0,1 – 10) kN 抗压强度 范围 (4,0 – 300) kN |
Constant rate of loading method | PN-EN 13888-2:2023-02 | |
| 8 | Tile grouts | Shrinkage 范围 (0 – 12) mm |
Graf-Kaufman method | PN-EN 13888-2:2023-02 | |
| 9 | Tile grouts | Water absorption | PN-EN 13888-2:2023-02 | ||
| 10 | Floor screeds | 抗弯强度 范围 (0,1 – 10) kN 抗压强度 范围 (4,0 – 300) kN |
Constant rate of loading method | PN-EN 13892-2:2004 | |
| 11 | Floor screeds | 耐磨性 范围 do 350 cm3 |
Böhme method | PN-EN 13892-3:2015-02 | |
| 12 | Floor screeds | Abrasion resistance of floor underlay materials covered with floor covering 范围 (150 – 550) N |
Rolling wheel load method | PN-EN 13892-7:2004 | |
| 13 | Floor screeds | Adhesion 范围 (0,1 – 18,0) kN |
Pull-off method | PN-EN 13892-8:2004 | |
| 14 | Floor screeds | Shrinkage and swelling 范围 (0 – 12) mm |
Graf-Kaufman method | PN-EN 13454-2:2019-02 | |
| 15 | Floor screeds | Dimensional change 范围 (0 – 12) mm |
Graf-Kaufman method | PN-EN 13872:2005 | |
| 16 | Masonry mortars | Grain size distribution 范围 (0,063 – 8,0) mm |
Dry sieving method; Wet sieving method | PN-EN 1015-1:2000+A1:2007 | |
| 17 | Masonry mortars | 稠度 范围 (100 – 300) mm |
Flow table method | PN-EN 1015-3:2000+A1:2005 +A2:2007 | |
| 18 | Masonry mortars | 堆积密度 | Vibration method; Shaking method; Filling method | PN-EN 1015-6:2000+A1:2007 | |
| 19 | Masonry mortars | 含气量 范围 poniżej 20 % 范围 powyżej 20% |
Method A – pressure; Method B – alcohol | PN-EN 1015-7:2000 | |
| 20 | Masonry mortars | Open time of general purpose mortar | Penetrating rod method | PN-EN 1015-9:2001+A1:2007 | |
| 21 | Masonry mortars | Open time of thin-layer mortar | Flow table method | PN-EN 1015-9:2001+A1:2007 | |
| 22 | Masonry mortars | Correction time of thin-layer mortar | PN-EN 1015-9:2001+A1:2007 | ||
| 23 | Masonry mortars | Density of dried hardened mortar | PN-EN 1015-10:2001+A1:2007 | ||
| 24 | Masonry mortars | 抗弯强度 范围 (0,1 – 10) kN |
Constant rate of loading method | PN-EN 1015-11:2020-04 | |
| 25 | Masonry mortars | 抗压强度 范围 (4,0 – 300) kN |
Constant rate of loading method | PN-EN 1015-11:2020-04 | |
| 26 | Masonry mortars | Adhesion 范围 (0,1 – 18,0) kN |
Pull-off method | PN-EN 1015-12:2016-08 | |
| 27 | Masonry mortars | Water absorption coefficient | PN-EN 1015-18:2003 | ||
| 28 | Masonry mortars | Water vapour transmission coefficient | PN-EN 1015-19:2000+A1:2005 | ||
| 29 | Masonry mortars | Frost resistance | PN-85/B-04500 | ||
| 30 | Adhesives | Adhesion of the adhesive mortar to the substrate 范围 (0,01 – 20) kN |
Pull-off method | ETAG 004:2013 EAD 040083-00-0404 | |
| 31 | Adhesives | Adhesion of the adhesive mortar to the thermal insulation product 范围 (0,01 – 20) kN |
Pull-off method | ETAG 004:2013 EAD 040083-00-0404 | |
| 32 | Adhesives | 灰分含量 | 重量法 | ETAG 004:2013 EAD 040083-00-0404 | |
| 33 | Adhesives | Particle size distribution 范围 (0,04 – 4,0) mm |
Air jet sieving method | ETAG 004:2013 EAD 040083-00-0404 | |
| 34 | Adhesives | Bulk density of fresh mortar | ETAG 004:2013 EAD 040083-00-0404 | ||
| 35 | Adhesives | 密度 | ETAG 004:2013 EAD 040083-00-0404 | ||
| 36 | Adhesives | Static modulus of elasticity, tensile strength and elongation at break 范围 (0,01 – 20) kN 范围 (0,2 – 500) mm |
Constant rate of force increase method | ETAG 004:2013 EAD 040083-00-0404 | |
| 37 | Plasters | Bulk density of fresh mortar | ETAG 004:2013 EAD 040083-00-0404 | ||
| 38 | Plasters | 密度 | ETAG 004:2013 EAD 040083-00-0404 | ||
| 39 | Plasters | Dry matter content | 重量法 | ETAG 004:2013 EAD 040083-00-0404 | |
| 40 | Plasters | 灰分含量 | 重量法 | ETAG 004:2013 EAD 040083-00-0404 | |
| 41 | Plasters | Particle size distribution 范围 (0,04 – 4,0) mm |
Air jet sieving method; Wet sieving method | ETAG 004:2013 EAD 040083-00-0404 | |
| 42 | Reinforcing meshes | 灰分含量 | 重量法 | ETAG 004:2013 EAD 040083-00-0404 | |
| 43 | Reinforcing meshes | Breaking strength and elongation of the reinforcing mesh 范围 (0,01 – 20) kN |
Constant rate of force increase method | ETAG 004:2013 EAD 040083-00-0404 | |
| 44 | External thermal insulation systems | Water absorption (capillary water rise test) | ETAG 004:2013 EAD 040083-00-0404 | ||
| 45 | External thermal insulation systems | Watertightness (behaviour after heat-humidity cycles) | ETAG 004:2013 EAD 040083-00-0404 | ||
| 46 | External thermal insulation systems | Watertightness (behaviour under freezing and thawing) | Simulation method | ETAG 004:2013 EAD 040083-00-0404 | |
| 47 | External thermal insulation systems | Resistance to hard body impact | ETAG 004:2013 EAD 040083-00-0404 | PN-B-10027:1993 | ||
| 48 | External thermal insulation systems | Water vapour permeability (water vapour diffusion resistance) | ETAG 004:2013 EAD 040083-00-0404 | PN-EN ISO 7783:2018-11 | ||
| 49 | External thermal insulation systems | Adhesion after ageing 范围 (0,01 – 20) kN |
Pull-off method | ETAG 004:2013 EAD 040083-00-0404 | |
| 50 | External thermal insulation systems | Adhesion of the reinforced render layer to the thermal insulation product 范围 (0,01 – 20) kN |
Pull-off method | ETAG 004:2013 EAD 040083-00-0404 | |
| 51 | Paints, Primers | 密度 | 比重瓶法 | ETAG 004:2013 EAD 040083-00-0404 | PN-EN ISO 2811-1:2016-04 | |
| 52 | Paints, Primers | Dry matter content | 重量法 | ETAG 004:2013 EAD 040083-00-0404 | |
| 53 | Paints, Primers | 灰分含量 | 重量法 | ETAG 004:2013 EAD 040083-00-0404 | |
引用标准 (23)
ETAG 004:2013 EAD 040083-00-0404
PN-85/B-04500
PN-B-10027:1993
PN-EN 1015-10:2001+A1:2007
PN-EN 1015-11:2020-04
PN-EN 1015-12:2016-08
PN-EN 1015-18:2003
PN-EN 1015-19:2000+A1:2005
PN-EN 1015-1:2000+A1:2007
PN-EN 1015-3:2000+A1:2005 +A2:2007
PN-EN 1015-6:2000+A1:2007
PN-EN 1015-7:2000
PN-EN 1015-9:2001+A1:2007
PN-EN 12004-2:2017-03
PN-EN 13454-2:2019-02
PN-EN 13872:2005
PN-EN 13888-2:2023-02
PN-EN 13892-2:2004
PN-EN 13892-3:2015-02
PN-EN 13892-7:2004
PN-EN 13892-8:2004
PN-EN ISO 2811-1:2016-04
PN-EN ISO 7783:2018-11