🇵🇱 Politechnika Świętokrzyska PL
电子与电磁兼容建筑汽车
Politechnika Świętokrzyska 是由 PCA 认可的实验室，认可编号 AB 117（Kielce，波兰）。认可范围涵盖 72 项检测方法，涉及以下领域：电子与电磁兼容、建筑、汽车。检测对象包括：倒车灯开关、制动灯开关、开关、输入电流 ≤ 16 A 且其产品标准援引第3栏所列标准中规定试验程序的电气与电子设备。
要点速览
- 认可编号: PCA AB 117
- 认可范围内方法数: 72
- 检测对象种类: 13
- 城市: Kielce, 波兰
- 认可编号
- AB 117
- 认可机构
- PCA
- 地址
- Al. Tysiąclecia Państwa Polskiego 7
- 城市
- Kielce, 波兰
- 部门
- Wydział Elektrotechniki, Automatyki i Informatyki, Laboratorium Elektrotechniki Pojazdowej
该实验室检测什么 (13)
- 倒车灯开关 — 15 项方法
- 制动灯开关 — 15 项方法
- 开关 — 15 项方法
- 输入电流 ≤ 16 A 且其产品标准援引第3栏所列标准中规定试验程序的电气与电子设备。 — 13 项方法
- 车辆电气设备与电气装备 — 5 项方法
- Vehicle alarm systems and immobilisers — 2 项方法
- Complete ignition cables — 1 项方法
- Electrical connections between towing vehicles and trailers — 1 项方法
- Electrical installation connectors — 1 项方法
- Electronic ignition systems — 1 项方法
- Ignition coils — 1 项方法
- Low voltage wire harnesses — 1 项方法
- Vehicle alarm systems — 1 项方法
证书信息
- 签发日期
- 19.03.2025
- 版次
- 19
认可范围 — 项检测方法 (72)
| 序号 | 检测对象 | 方法 / 参数 | 技术 | 依据文件 | |
|---|---|---|---|---|---|
| 检测方法 | |||||
| 1 | Electrical installation connectors | Contact mating forces Mechanical strength of the contact retention First mating force of the connector Connector contact resistance Mating and unmating force of the connector Current test Insulation resistance Dielectric strength Correct operation after cyclic temperature and humidity changes Vibration resistance Range: vibration frequency (20 – 500) Hz, acceleration 100m/s2 Ageing resistance Watertightness Temperature rise Resistance to polarity reversal Mechanical strength of the latch Corrosion resistance | PN-EN ISO 8092-2: 2008 | ||
| 2 | 开关 | 标识耐久性 | PB 10/LEP:1997 (Wyd. 3) p.: 4.1 | ||
| 3 | 开关 | 动作的正确性 | PB 10/LEP:1997 (Wyd. 3) p.: 4.2 | ||
| 4 | 开关 | Voltage drop | PB 10/LEP:1997 (Wyd. 3) p.: 4.3 | ||
| 5 | 开关 | Resistance and endurance to temperature | PB 10/LEP:1997 (Wyd. 3) p.: 4.4 | ||
| 6 | 开关 | Resistance to thermal shock Range: (from -18 to +65)°C | PN-EN 60068-2-14:2009 | ||
| 7 | 开关 | 耐潮湿作用性 | PB 10/LEP:1997 (Wyd. 3) PN-EN 60068-2-78:2007 | ||
| 8 | 开关 | 绝缘介电强度 | PB 34/LEP:2012 (Wyd. 1), p.: 4.7 | ||
| 9 | 开关 | 绝缘电阻 | PB 34/LEP:2012 (Wyd. 1), p.: 4.6 | ||
| 10 | 开关 | 温升 | PB 10/LEP:1997 (Wyd. 3) p.: 4.9 | ||
| 11 | 开关 | Switching force or torque | PB 10/LEP:1997 (Wyd. 3) p.: 4.10 | ||
| 12 | 开关 | 耐腐蚀性 | PN-EN ISO 9227:2012 | ||
| 13 | 开关 | 外壳防护等级 | PN-EN 60529:2003 | ||
| 14 | 开关 | Resistance to vibration – test Fc Range: swept vibration frequency (20 – 500)Hz acceleration (5 – 50) g | PN-EN 60068-2-6:2008 | ||
| 15 | 开关 | Mechanical strength of the terminals | PB 34/LEP:2012 (Wyd. 1), p.: 4.9 | ||
| 16 | 开关 | 耐久性 | PB 10/LEP:1997 (Wyd. 3) p.: 4.15 | ||
| 17 | 制动灯开关 | 外壳防护等级 | PN-EN 60529:2003 | ||
| 18 | 制动灯开关 | Switching-on force | PB 11/LEP:1997 (Wyd. 3) p.: 4.2 | ||
| 19 | 制动灯开关 | Resistance and endurance to the action of temperatures | PB 34/LEP:2012 (Wyd. 1), p.: 4.4 | ||
| 20 | 制动灯开关 | Resistance to moisture uptake | PB 34/LEP:2012 (Wyd. 1), p.: 4.3 | ||
| 21 | 制动灯开关 | Resistance to vibration – test Fc | PN-EN 60068-2-6:2008 | ||
| 22 | 制动灯开关 | 绝缘介电强度 | PB 34/LEP:2012 (Wyd. 1), p.: 4.7 | ||
| 23 | 制动灯开关 | 绝缘电阻 | PB 11/LEP:1997 (Wyd. 3) p.: 4.7 | ||
| 24 | 制动灯开关 | Voltage drop at the terminals | PB 11/LEP:1997 (Wyd. 3) p.: 4.8 | ||
| 25 | 制动灯开关 | 温升 | PB 11/LEP:1997 (Wyd. 3) p.: 4.9 | ||
| 26 | 制动灯开关 | Current overload capacity | PB 11/LEP:1997 (Wyd. 3) p.: 4.10 | ||
| 27 | 制动灯开关 | Contactor tightness | PB 11/LEP:1997 (Wyd. 3) p.: 4.11, 4.12 | ||
| 28 | 制动灯开关 | Endurance of hydraulic and pneumatic contactors | PB 11/LEP:1997 (Wyd. 3) p.: 4.13 | ||
| 29 | 制动灯开关 | 耐腐蚀性 | PN-EN ISO 9227:2012 | ||
| 30 | 制动灯开关 | 耐久性 | PB 11/LEP:1997 (Wyd. 3) p.: 4.15 | ||
| 31 | 制动灯开关 | 标识耐久性 | PB 34/LEP:2012 (Wyd. 1), p.: 4.12 | ||
| 32 | Complete ignition cables | Durability of marking Resistance and capacitance of the cable. Dielectric strength of the cable Range: up to 40kV Resistance of the cable to surface discharges Dielectric strength of rubber parts Range: up to 30kV Tensile strength of the cable Insertion and withdrawal forces of the terminal Pull-off force of the terminal Resistance of the cable to high temperature Resistance of the cable to low temperature Resistance of the cable to oil Resistance of the cable to fuel Resistance of rubber boots to oil Resistance of rubber boots to ageing in water | WT-ITS | ISO 3808-2:2002 PN-ISO 48:1998/A1:2000 PN-ISO 1817:2001/Ap1:2002 | ||
| 33 | Low voltage wire harnesses | Geometric dimensions Stripping length of conductors Conductor thickening after soldering Retention forces of terminals and caps Retention forces of insulating tubes Retention forces of covers Strength of connections of conductors with terminals, caps and housings Insulation resistance Dielectric strength of the insulation Voltage drop Resistance to cyclic temperature changes Range: (from +85 ±2 to -25 ±2)°C Durability of marking | PB 14/LEP:1997 (Wyd. 3) | ||
| 34 | 倒车灯开关 | 标识耐久性 | PB 16/LEP:1997 (Wyd. 3) p.: 4.1 | ||
| 35 | 倒车灯开关 | 动作的正确性 | PB 16/LEP:1997 (Wyd. 3) p.: 4.2 | ||
| 36 | 倒车灯开关 | Voltage drop | PB 16/LEP:1997 (Wyd. 3) p.: 4.3 | ||
| 37 | 倒车灯开关 | Resistance and endurance to temperature | PB 34/LEP:2012 (Wyd. 1), p.: 4.4 | ||
| 38 | 倒车灯开关 | Resistance to thermal shock Range: (from -18 to +65)°C | PN-EN 60068-2-14:2009 | ||
| 39 | 倒车灯开关 | 耐潮湿作用性 | PB 16/LEP:1997 (Wyd. 3) PN-EN 60068-2-78:2007 | ||
| 40 | 倒车灯开关 | 绝缘介电强度 | PB 34/LEP:2012 (Wyd. 1), p.: 4.7 | ||
| 41 | 倒车灯开关 | 绝缘电阻 | PB 34/LEP:2012 (Wyd. 1), p.: 4.6 | ||
| 42 | 倒车灯开关 | 温升 | PB 16/LEP:1997 (Wyd. 3) p.: 4.9 | ||
| 43 | 倒车灯开关 | Switching force or torque | PB 16/LEP:1997 (Wyd. 3) p.: 4.10 | ||
| 44 | 倒车灯开关 | 耐腐蚀性 | PN-EN ISO 9227:2012 | ||
| 45 | 倒车灯开关 | 外壳防护等级 | PN-EN 60529:2003 | ||
| 46 | 倒车灯开关 | Resistance to vibration Range: swept vibration frequency (20 – 500) Hz, acceleration (5 – 50) g | PN-EN 60068-2-6:2008 – próba Fc | ||
| 47 | 倒车灯开关 | Mechanical strength of terminal fixing | PB 34/LEP:2012 (Wyd. 1), p.: 4.9 | ||
| 48 | 倒车灯开关 | 耐久性 | PB 16/LEP:1997 (Wyd. 3) p.: 4.15 | ||
| 49 | Electrical connections between towing vehicles and trailers | Geometric dimensions Mating and unmating force Operation of the locking mechanism Static load Strength of the locking mechanism and of cable retention Lateral strength at low temperature Voltage drop Resistance to corrosion Current-carrying capacity Application of current cycles Dielectric strength of the insulation Durability Resistance to vibration (sinusoidal vibrations) Range: (5 – 11) Hz at a constant amplitude of ±10 mm and (11 – 200) Hz at an acceleration of 50m/s2 Resistance to temperature/humidity Range: temp (from - 40 to + 99)°C at a relative humidity of (70 – 96)% Mating and unmating forces Resistance to water spray | PN-ISO 4091:1999 | ||
| 50 | Ignition coils | Resistance to the action of temperatures Insulation resistance Polarity Secondary voltage Current consumption Electric strength of insulation Overload withstand Contact resistance Resistance to moisture Vibration endurance Range: frequency: (20 – 500) Hz, acceleration: 50 m/s2 Mechanical strength of the low-voltage terminal fixing Corrosion resistance Durability Durability of marking | PB 24/LEP:1997 (Wyd. 3) | ||
| 51 | Electronic ignition systems | Overall and mounting dimensions Peak value of high voltage Rise time Discharge duration Characteristics of ignition advance angle control Immunity to pulse disturbances Immunity to disturbances induced on the signal sensor leads Immunity to disconnection of the high-voltage lead from the coil Immunity to polarity reversal Resistance and endurance to temperature Range: (from -30 to +85)°C Resistance to cyclic temperature changes Resistance and endurance to thermal shock Resistance to steady-state damp heat Degree of protection of the enclosure Resistance to petroleum products Resistance to vibration and shock Range: (sinusoidal vibrations with a displacement amplitude of ±0,5 mm and an acceleration amplitude of 30 m/s2, in the frequency range (10 – 500) Hz Resistance to corrosion Mechanical strength of terminal fixing Durability of marking Durability | PB 27/LEP:1997 (Wyd. 3) | ||
| 52 | Vehicle alarm systems | Correct operation of the devices detecting intrusion into protected zones Correct operation of the devices setting and unsetting the system Correct alarm signalling Correct acoustic warning signal Correct optical warning signal Correct operation of the vehicle immobilising devices Correct operation of the main and standby power supply Resistance to overvoltages Resistance to short circuits Resistance to reversal of the supply voltage polarity Resistance to reduction and/or disconnection of the supply voltage Resistance to changes of temperature and supply voltage Resistance to corrosion Resistance to sinusoidal vibration Resistance to repetitive shocks Resistance to free fall Degree of protection of the enclosure Resistance to disturbances conducted via the power supply lines Resistance to disturbances conducted via the detection circuit lines Resistance to high-frequency electromagnetic field disturbances Resistance to electrostatic discharges Durability of the acoustic sounder Durability of the vehicle alarm system Correctness of the sound of the acoustic sounder signal (comparison with the sounds generated by the sounders of emergency vehicles) | PN-IEC 839-10-1:1997 | ||
| 53 | 车辆电气设备与电气装备 | Immunity to radiated disturbances (immunity to electromagnetic disturbances) Range: (20 – 1000) MHz | Nr 10.05/UNECE | ISO 11452 –1: 2005 | ISO 11452 –2: 2005) Dziennik Urzędowy Unii Europejskiej Nr L 41/1 z dnia 17.02.2017 r. | ||
| 54 | 车辆电气设备与电气装备 | Level of radio interference emission (electromagnetic disturbance emission) Range: (20 – 1000) MHz | nr 10 | Nr 10.05/UNECE | PN-CISPR 16-2:1999) Dziennik Urzędowy Unii Europejskiej Nr L 41/1 z dnia 17.02.2017 r. | ||
| 55 | 车辆电气设备与电气装备 | Immunity to disturbances propagated in power lines | PN-ISO 7637-1: 2012 | ||
| 56 | 车辆电气设备与电气装备 | Immunity to disturbances induced in signal lines | PB 32/LEP:2004 (Wyd. 1) | ||
| 57 | 车辆电气设备与电气装备 | 静电放电抗扰度 | PN-EN 61000-4-2:2009 | ||
| 58 | 输入电流 ≤ 16 A 且其产品标准援引第3栏所列标准中规定试验程序的电气与电子设备。 | Touch current and protective conductor current (safety in use) | PN-EN 60990:2002 | ||
| 59 | 输入电流 ≤ 16 A 且其产品标准援引第3栏所列标准中规定试验程序的电气与电子设备。 | 电压波动与闪烁 | PN-EN 61000-3-3:2013 | ||
| 60 | 输入电流 ≤ 16 A 且其产品标准援引第3栏所列标准中规定试验程序的电气与电子设备。 | Immunity to electrical fast transient/burst (test level: up to 4.8 kV) | PN-EN 61000-4-4:2013 | ||
| 61 | 输入电流 ≤ 16 A 且其产品标准援引第3栏所列标准中规定试验程序的电气与电子设备。 | Immunity to surges (test level: up to 4.3 kV) | PN-EN 61000-4-5:2010 | ||
| 62 | 输入电流 ≤ 16 A 且其产品标准援引第3栏所列标准中规定试验程序的电气与电子设备。 | Immunity to power frequency magnetic field (test level: up to100 A/m) | PN-EN 61000-4-8:2010 | ||
| 63 | 输入电流 ≤ 16 A 且其产品标准援引第3栏所列标准中规定试验程序的电气与电子设备。 | Immunity to pulse magnetic field (test level: up to 1000 A/m) | PN-EN 61000-4-9:1998 | ||
| 64 | 输入电流 ≤ 16 A 且其产品标准援引第3栏所列标准中规定试验程序的电气与电子设备。 | Immunity to voltage dips, short interruptions and voltage variations (test level: 0% U , 40% U , 70% U , T T T 80% U ) T | PN-EN 61000-4-11:2007 | ||
| 65 | 输入电流 ≤ 16 A 且其产品标准援引第3栏所列标准中规定试验程序的电气与电子设备。 | Immunity to low frequency disturbances (test level: from 1.5% U to 12% U 1) 1 | PN-EN 61000-4-13:2007 | ||
| 66 | 输入电流 ≤ 16 A 且其产品标准援引第3栏所列标准中规定试验程序的电气与电子设备。 | Immunity to voltage fluctuations (test level: 8% U , 12%U ) n n | PN-EN 61000-4-14:2002 | ||
| 67 | 输入电流 ≤ 16 A 且其产品标准援引第3栏所列标准中规定试验程序的电气与电子设备。 | Immunity to ripple on the d.c. supply voltage (test level: 2% U , 5% U , 10% DC DC U , 15% U ) DC DC | PN-EN 61000-4-17:2004 | ||
| 68 | 输入电流 ≤ 16 A 且其产品标准援引第3栏所列标准中规定试验程序的电气与电子设备。 | Immunity to voltage unbalance (test level: from 66% U to 110% U ) N N | PN-EN 61000-4-27:2004 | ||
| 69 | 输入电流 ≤ 16 A 且其产品标准援引第3栏所列标准中规定试验程序的电气与电子设备。 | Immunity to power frequency variations (test level: from 3% f to 1 15% f , from 1s to 10s) 1 | PN-EN 61000-4-28:2004 | ||
| 70 | 输入电流 ≤ 16 A 且其产品标准援引第3栏所列标准中规定试验程序的电气与电子设备。 | Immunity to voltage dips, short interruptions and voltage variations occurring at the DC power port (test level: up to 120% U ) T | PN-EN 61000-4-29:2004 | ||
| 71 | Vehicle alarm systems and immobilisers | Correct operation of the device. Correct protection against false alarms Duration of the audible signal Parameters of the audible signal Duration of the optical signal Parameters of the optical signal. Correct operation of the radio alarm (pager) Correct operation of the alarm system blocking procedure Correct operation of the devices setting and unsetting the alarm system Exit delay Entry delay Status display Correct operation of the main and standby power supply Correct operation of the self-monitoring and automatic fault indication mechanisms Correct operation of the PANIC alarm Resistance to atmospheric influences Resistance to temperature and voltage variations Correct operation after the dust-tightness and water-tightness tests Correct operation after the water condensation test Correct protection against reverse polarity Correct protection against short circuits Energy consumption in the set state Correct operation after the vibration resistance test Durability Correct operation of the external switch (installed outside the vehicle) Protection of the passenger compartment | Nr 97/UNECE | ennik Urzędowy Ministra Infrastruktury Nr 6 z dnia 18.IV.2002 r.) REGULAMIN Nr 28/UNECE (EKG ONZ) (Dziennik Urzędowy Unii Europejskiej Nr L 185 z dnia 17.07.2010 r.) REGULAMIN Nr 116/UNECE (EKG ONZ) (Dziennik Urzędowy Unii Europejskiej Nr L 181 z dnia 30.06.2010 r.) PB 33/LEP:2004 (Wyd. 1) | ||
| 72 | Vehicle alarm systems and immobilisers | Immunity to conducted disturbances propagated in power lines Immunity to disturbances induced in signal lines Immunity to radiated high-frequency disturbances Immunity to electrical disturbances caused by electrostatic discharges Correctness of radio-frequency interference (RFI) suppression Correctness of protection against false alarm in the event of an impact on the vehicle Correctness of protection against false alarm in the event of voltage reduction Correctness of protection against false alarm caused by passenger compartment monitoring Correctness of immobiliser operation Correctness of operation of devices setting and unsetting the immobiliser Correctness of operation of the immobiliser status indicator Safety of immobiliser operation Correctness of operation of immobiliser modules intended to block the operation of individual sub-assemblies essential for moving the vehicle | Nr 97/UNECE | ennik Urzędowy Ministra Infrastruktury Nr 6 z dnia 18.IV.2002 r.) REGULAMIN Nr 28/UNECE (EKG ONZ) (Dziennik Urzędowy Unii Europejskiej Nr L 185 z dnia 17.07.2010 r.) REGULAMIN Nr 116/UNECE (EKG ONZ) (Dziennik Urzędowy Unii Europejskiej Nr L 181 z dnia 30.06.2010 r.) PB 33/LEP:2004 (Wyd. 1) | ||
引用标准 (65)
ISO 11452 –1: 2005
ISO 11452 –2: 2005) Dziennik Urzędowy Unii Europejskiej Nr L 41/1 z dnia 17.02.2017 r.
ISO 3808-2:2002 PN-ISO 48:1998/A1:2000 PN-ISO 1817:2001/Ap1:2002
Nr 10.05/UNECE
Nr 97/UNECE
PB 10/LEP:1997 (Wyd. 3) PN-EN 60068-2-78:2007
PB 10/LEP:1997 (Wyd. 3) p.: 4.1
PB 10/LEP:1997 (Wyd. 3) p.: 4.10
PB 10/LEP:1997 (Wyd. 3) p.: 4.15
PB 10/LEP:1997 (Wyd. 3) p.: 4.2
PB 10/LEP:1997 (Wyd. 3) p.: 4.3
PB 10/LEP:1997 (Wyd. 3) p.: 4.4
PB 10/LEP:1997 (Wyd. 3) p.: 4.9
PB 11/LEP:1997 (Wyd. 3) p.: 4.10
PB 11/LEP:1997 (Wyd. 3) p.: 4.11, 4.12
PB 11/LEP:1997 (Wyd. 3) p.: 4.13
PB 11/LEP:1997 (Wyd. 3) p.: 4.15
PB 11/LEP:1997 (Wyd. 3) p.: 4.2
PB 11/LEP:1997 (Wyd. 3) p.: 4.7
PB 11/LEP:1997 (Wyd. 3) p.: 4.8
PB 11/LEP:1997 (Wyd. 3) p.: 4.9
PB 14/LEP:1997 (Wyd. 3)
PB 16/LEP:1997 (Wyd. 3) PN-EN 60068-2-78:2007
PB 16/LEP:1997 (Wyd. 3) p.: 4.1
PB 16/LEP:1997 (Wyd. 3) p.: 4.10
PB 16/LEP:1997 (Wyd. 3) p.: 4.15
PB 16/LEP:1997 (Wyd. 3) p.: 4.2
PB 16/LEP:1997 (Wyd. 3) p.: 4.3
PB 16/LEP:1997 (Wyd. 3) p.: 4.9
PB 24/LEP:1997 (Wyd. 3)
PB 27/LEP:1997 (Wyd. 3)
PB 32/LEP:2004 (Wyd. 1)
PB 34/LEP:2012 (Wyd. 1), p.: 4.12
PB 34/LEP:2012 (Wyd. 1), p.: 4.3
PB 34/LEP:2012 (Wyd. 1), p.: 4.4
PB 34/LEP:2012 (Wyd. 1), p.: 4.6
PB 34/LEP:2012 (Wyd. 1), p.: 4.7
PB 34/LEP:2012 (Wyd. 1), p.: 4.9
PN-CISPR 16-2:1999) Dziennik Urzędowy Unii Europejskiej Nr L 41/1 z dnia 17.02.2017 r.
PN-EN 60068-2-14:2009
PN-EN 60068-2-6:2008
PN-EN 60068-2-6:2008 – próba Fc
PN-EN 60529:2003
PN-EN 60990:2002
PN-EN 61000-3-3:2013
PN-EN 61000-4-11:2007
PN-EN 61000-4-13:2007
PN-EN 61000-4-14:2002
PN-EN 61000-4-17:2004
PN-EN 61000-4-27:2004
PN-EN 61000-4-28:2004
PN-EN 61000-4-29:2004
PN-EN 61000-4-2:2009
PN-EN 61000-4-4:2013
PN-EN 61000-4-5:2010
PN-EN 61000-4-8:2010
PN-EN 61000-4-9:1998
PN-EN ISO 8092-2: 2008
PN-EN ISO 9227:2012
PN-IEC 839-10-1:1997
PN-ISO 4091:1999
PN-ISO 7637-1: 2012
WT-ITS
ennik Urzędowy Ministra Infrastruktury Nr 6 z dnia 18.IV.2002 r.) REGULAMIN Nr 28/UNECE (EKG ONZ) (Dziennik Urzędowy Unii Europejskiej Nr L 185 z dnia 17.07.2010 r.) REGULAMIN Nr 116/UNECE (EKG ONZ) (Dziennik Urzędowy Unii Europejskiej Nr L 181 z dnia 30.06.2010 r.) PB 33/LEP:2004 (Wyd. 1)
nr 10