🇵🇱 Lab-WP Wojciech Płowucha PL

PCA AP 236 • Żywiec, Poland • 14 calibration items

Metrology & calibration

Lab-WP Wojciech Płowucha is a calibration laboratory accredited by PCA under number AP 236 (Żywiec, Poland). Its accreditation scope covers 14 calibration items in the following areas: Metrology & calibration. Calibrated items include: Measuring projectors, Universal measuring microscopes, Workshop measuring microscopes, - articulated arm coordinate measuring machines. Most frequently used calibration principles: Outside of permanent location (P), Internal procedure; Direct method; Outside of permanent location (P).

At a glance

  • Accreditation number: PCA AP 236
  • Calibration items in scope: 14
  • Types of calibrated items: 19
  • Calibration principles used: 2
  • City: Żywiec, Poland
  • Valid until: 01-02-2030
Accreditation number
AP 236
Accreditation body
PCA
Address
ul. Os. Pod Grapą 6/3, 34-300 Żywiec
City
Żywiec, Poland
Valid until
01-02-2030

What this laboratory calibrates (19)

Calibration principles (2)

Certificate information

Issue date
02.02.2026
Issue no.
1
Certificate date
02.02.2026
Accreditation cycle
02.02.2026 — 01.02.2030
Approved by
Katarzyna Wiśniewska

Accreditation scope — calibration items (14)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 %. The CMC uncertainty is expressed in measurand units.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Vertical Abbe length measuring machines Calibration — Length
0 mm to 100 mm · CMC (0,1 + 2 · L) µm
Length
Internal procedure; Direct method; Outside of permanent location (P) PWZ-1
2 Horizontal Abbe length measuring machines Calibration — Length
0 mm to 1000 mm · CMC (0,1 + 2 · L) µm
Length
Internal procedure; Direct method; Outside of permanent location (P) PWZ-1
3 Horizontal length measuring machines (1-D machines) Calibration — Length
0 mm to 1000 mm · CMC (0,1 + 2 · L) µm 1000 mm do 1900 mm · CMC (0,4 + 2 · L) µm 1900 mm do 2700 mm · CMC (0,6 + 2 · L) µm
Length
Internal procedure; Direct method; Outside of permanent location (P) PWZ-1
4 Universal measuring microscopes
Workshop measuring microscopes
Calibration — Length
0 mm to 25 mm · CMC (0,35 + L) µm 25 mm do 500 mm · CMC (0,4 + 2,5 · L) µm 500 mm do 1000 mm · CMC (0,5 + 3 · L) µm 1000 mm do 1500 mm · CMC (0,7 + 3 · L) µm 1500 mm do 2000 mm · CMC (0,9 + 3 · L) µm
Length
Internal procedure; Direct method; Outside of permanent location (P) PWZ-1
5 Measuring projectors Calibration — Length
0 mm to 500 mm · CMC (0,3 + 3 · L) µm
Length
Internal procedure; Direct method; Outside of permanent location (P) PWZ-1
6 Digital height gauges with resolution: Calibration — Length
- 0.01 mm — 0 mm to 1000 mm · CMC 6 µm - 0.005 mm — 0 mm to 1000 mm · CMC 3,5 µm - 0.001 mm — 0 mm to 1000 mm · CMC (0,6 + 2 · L) µm - 0.0005 mm — 0 mm to 1000 mm · CMC (0,3 + 2,5 · L) µm - 0.0001 mm — 0 mm to 1000 mm · CMC (0,3 + 2,5 · L) µm
Length
Outside of permanent location (P) PN-EN ISO 13225:2012
7 Universal measuring microscopes
Workshop measuring microscopes
Measuring projectors
Calibration — Angle
0° to 360° · CMC 2’
Angle
Internal procedure; Direct method; Outside of permanent location (P) PWZ-1
8 Contact probes
Touch-trigger contact probes
Scanning contact probes
Calibration — Length (coordinate measurements)
0 mm to 25 mm · CMC 0,14 µm
Length (coordinate measurements)
Outside of permanent location (P) PN-EN ISO 10360-5:2020-10
9 Coordinate measuring machines with a contact probe Calibration — Length (coordinate measurements)
0 mm to 1515 mm · CMC (0,2 + 0,5 · L) µm 1515 mm to 2880 mm · CMC (0,3 + 0,6 · L) µm 2880 mm to 4090 mm · CMC (0,4 + 0,7 · L) µm
Length (coordinate measurements)
Outside of permanent location (P) PN-EN ISO 10360-2:2010
10 Optical coordinate measuring machines with an imaging probe Calibration — Length (coordinate measurements)
0 mm to 758 mm · CMC (0,3 + 0,6 · L) µm
Length (coordinate measurements)
Outside of permanent location (P) PN-EN ISO 10360-7:2011
11 Optical coordinate measuring microscopes Calibration — Length (coordinate measurements)
0 mm to 758 mm · CMC (0,3 + 0,6 · L) µm
Length (coordinate measurements)
Outside of permanent location (P) PN-EN ISO 10360-7:2011
12 Optical coordinate measuring projectors Calibration — Length (coordinate measurements)
0 mm to 758 mm · CMC (0,3 + 0,6 · L) µm
Length (coordinate measurements)
Outside of permanent location (P) PN-EN ISO 10360-7:2011
13 Articulated arm coordinate measuring machines with a contact probe Calibration — Length (coordinate measurements)
0 mm to 4500 mm · CMC (4 + 1 · L) µm
Length (coordinate measurements)
Outside of permanent location (P) ASME B89.4.22:2004, PN-EN ISO 10360-12:2017
14 Coordinate measuring systems with an optical distance sensor:
- coordinate measuring machines
- articulated arm coordinate measuring machines
- optical coordinate scanners
Calibration — Length (coordinate measurements)
0 mm to 1500 mm · CMC (2 + 1 · L) µm
Length (coordinate measurements)
Outside of permanent location (P) VDI/VDE 2634 Blat 2 2012, VDI/VDE 2634 Blat 3 2008, PN-EN ISO 10360-8:2014, PN-EN ISO 10360-13:2022

Reference standards (11)

ASME B89.4.22:2004
PN-EN ISO 10360-12:2017
PN-EN ISO 10360-13:2022
PN-EN ISO 10360-2:2010
PN-EN ISO 10360-5:2020-10
PN-EN ISO 10360-7:2011
PN-EN ISO 10360-8:2014
PN-EN ISO 13225:2012
PWZ-1
VDI/VDE 2634 Blat 2 2012
VDI/VDE 2634 Blat 3 2008

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20236