🇵🇱 Mobi-Lab Patryk Jaskuła PL

PCA AP 224 • Gortatowo, Poland • 5 calibration items

Metrology & calibration

Mobi-Lab Patryk Jaskuła is a calibration laboratory accredited by PCA under number AP 224 (Gortatowo, Poland). Its accreditation scope covers 5 calibration items in the following areas: Metrology & calibration. Calibrated items include: - gauge pressure, Bourdon tube pressure gauges, Calipers, Electronic pressure gauges. Most frequently used calibration principles: Outside of permanent location (P), Basic calibration procedure, clause 5.2.1; Outside of permanent loc….

At a glance

Accreditation number: PCA AP 224
Calibration items in scope: 5
Types of calibrated items: 7
Calibration principles used: 2
City: Gortatowo, Poland
Valid until: 10-02-2029

Accreditation number: AP 224
Accreditation body: PCA
Address: ul. Książęca 16, 62-020 Gortatowo
City: Gortatowo, Poland
Division: Laboratorium Wzorcujące Mobi-Lab
Valid until: 10-02-2029

What this laboratory calibrates (7)

- gauge pressure — 1 calibration item
Bourdon tube pressure gauges — 1 calibration item
Calipers — 1 calibration item
Electronic pressure gauges — 1 calibration item
External micrometers — 1 calibration item
Torque screwdrivers — 1 calibration item
Torque wrenches — 1 calibration item

Calibration principles (2)

Outside of permanent location (P) — 4 calibration items
Basic calibration procedure, clause 5.2.1; Outside of permanent location (P) — 1 calibration item

Certificate information

Issue date: 11.02.2026
Issue no.: 2
Certificate date: 11.02.2025
Accreditation cycle: 11.02.2025 — 10.02.2029
Approved by: Tadeusz Matras

Accreditation scope — calibration items (5)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units. The CMC uncertainty expressed as a percentage is the relative measurement uncertainty and refers to the percentage share in the value of the measurand.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Calipers	Calibration — Length 0 mm to 50 mm · CMC 14 µm 0 mm do 150 mm · CMC 15 µm 0 mm do 300 mm · CMC 17 µm Length	Outside of permanent location (P)	PN-EN ISO/IEC 13385:2019
2	External micrometers	Calibration — Length 0 mm to 25 mm · CMC 1,8 µm 25 mm to 50 mm · CMC 2,2 µm 50 mm to 75 mm · CMC 3,0 µm 75 mm to 100 mm · CMC 3,6 µm 100 mm to 125 mm · CMC 4,8 µm 125 mm to 150 mm · CMC 5,5 µm 150 mm to 175 mm · CMC 6,4 µm 175 mm to 200 mm · CMC 7,2 µm Length	Outside of permanent location (P)	PN EN-ISO 3611:2023-10E
3	Torque wrenches	Calibration — Torque 0,2 Nm to 1000 Nm · CMC 0,54 % Torque	Outside of permanent location (P)	PN-EN ISO/IEC 6789-1:2017-03 PN-EN ISO/IEC 6789-2:2017-03
4	Torque screwdrivers	Calibration — Torque 0,2 Nm to 10 Nm · CMC 1,20 % Torque	Outside of permanent location (P)	PN-EN ISO/IEC 6789-1:2017-03 PN-EN ISO/IEC 6789-2:2017-03
5	Bourdon tube pressure gauges Electronic pressure gauges - gauge pressure	Calibration — Pressure -0,095 MPa to 70 MPa · CMC 300 Pa Pressure	Basic calibration procedure, clause 5.2.1; Outside of permanent location (P)	EURAMET Cg-17 v.4.1

Reference standards (5)

EURAMET Cg-17 v.4.1

PN EN-ISO 3611:2023-10E

PN-EN ISO/IEC 13385:2019

PN-EN ISO/IEC 6789-1:2017-03

PN-EN ISO/IEC 6789-2:2017-03

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20224