🇵🇱 HEXAGON Metrology Sp. z o.o. PL
Metrology & calibration
HEXAGON Metrology Sp. z o.o. is a calibration laboratory accredited by PCA under number AP 206 (Kraków, Poland). Its accreditation scope covers 3 calibration items in the following areas: Metrology & calibration. Calibrated items include: Articulated arm coordinate measuring machines with a contact probin…, Contact probing systems, Coordinate measuring machines with a contact probing system. Most frequently used calibration principles: At permanent location (S), Calibration using a step gauge; Outside of permanent location (P), Outside of permanent location (P).
At a glance
- Accreditation number: PCA AP 206
- Calibration items in scope: 3
- Types of calibrated items: 3
- Calibration principles used: 3
- City: Kraków, Poland
- Valid until: 27-04-2030
- Accreditation number
- AP 206
- Accreditation body
- PCA
- Address
- ul. Ciepłownicza 23, 31-574 Kraków
- City
- Kraków, Poland
- Division
- Calibration Laboratory
- Valid until
- 27-04-2030
What this laboratory calibrates (3)
- Articulated arm coordinate measuring machines with a contact probing system — 1 calibration item
- Contact probing systems — 1 calibration item
- Coordinate measuring machines with a contact probing system — 1 calibration item
Calibration principles (3)
- At permanent location (S) — 1 calibration item
- Calibration using a step gauge; Outside of permanent location (P) — 1 calibration item
- Outside of permanent location (P) — 1 calibration item
Certificate information
- Issue date
- 31.03.2026
- Issue no.
- 4
- Certificate date
- 28.04.2022
- Accreditation cycle
- 31.03.2026 — 27.04.2030
- Approved by
- Katarzyna Wiśniewska
Accreditation scope — calibration items (3)
| No. | Calibrated quantity / subject of calibration | Nominal range / parameters / CMC | Calibration principle | Calibration procedure | |
|---|---|---|---|---|---|
| Calibration items | |||||
| 1 | Coordinate measuring machines with a contact probing system | Calibration — Length (coordinate measurements) 20 mm to 2333 mm · CMC (0,25 + 0,25 · L) µm; L – measured value (m) Length (coordinate measurements) |
Calibration using a step gauge; Outside of permanent location (P) | PN-EN ISO 10360-2:2010 | |
| 2 | Contact probing systems | Calibration — Length (coordinate measurements) 25 mm to 30 mm · CMC 0,2 µm Length (coordinate measurements) |
Outside of permanent location (P) | PN-EN ISO 10360-5:2020 | |
| 3 | Articulated arm coordinate measuring machines with a contact probing system | Calibration — Length (coordinate measurements) 100 mm to 1200 mm · CMC (1,2 + 2,5 · L) µm; L – measured value (m) 200 mm to 4500 mm · CMC (1,5 + 2,4 · L) µm; L – measured value (m) Length (coordinate measurements) |
At permanent location (S) | PN-EN ISO 10360-12:2017 | |
Reference standards (3)
PN-EN ISO 10360-12:2017
PN-EN ISO 10360-2:2010
PN-EN ISO 10360-5:2020