🇵🇱 LaborTech Polska Marceli Fuczek PL

PCA AP 194 • Oświęcim, Poland • 9 calibration items

Metrology & calibration

LaborTech Polska Marceli Fuczek is a calibration laboratory accredited by PCA under number AP 194 (Oświęcim, Poland). Its accreditation scope covers 9 calibration items in the following areas: Metrology & calibration. Calibrated items include: Static testing machines, Technological devices, Brinell hardness testers, Extensometers. Most frequently used calibration principles: At permanent location (S) and outside of it (P), Outside of permanent location (P).

At a glance

  • Accreditation number: PCA AP 194
  • Calibration items in scope: 9
  • Types of calibrated items: 7
  • Calibration principles used: 2
  • City: Oświęcim, Poland
  • Valid until: 11-04-2029
Accreditation number
AP 194
Accreditation body
PCA
Address
Zaborze, ul. Pod Górką 1A, 32-600 Oświęcim
City
Oświęcim, Poland
Division
LaborTech Polska Calibration Laboratory
Valid until
11-04-2029

What this laboratory calibrates (7)

Calibration principles (2)

Certificate information

Issue date
25.06.2026
Issue no.
9
Certificate date
09.09.2025
Accreditation cycle
12.03.2025 — 11.04.2029
Approved by
Katarzyna Wiśniewska

Accreditation scope — calibration items (9)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units. A CMC uncertainty value expressed as a percentage is the relative measurement uncertainty and refers to the percentage of the value of the measurand.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Static testing machines
Technological devices
Calibration — Force
- for tensile forces — 0,01 N to 0,5 N · CMC 0,1 % 1) - for tensile forces — 0,5 N to 500 N · CMC 0,01 % 1) - for compressive forces — 0,01 N to 0,5 N · CMC 0,1 % 1) - for compressive forces — 0,5 N to 500 N · CMC 0,01 % 1)
Force
At permanent location (S) and outside of it (P) PN-EN ISO 7500- 1:2018-05, ASTM E4-24
2 Static testing machines
Technological devices
Calibration — Force
- for tensile forces — 1 N to 2500 kN · CMC 0,12 % 2) - for tensile forces — 1 N to 2500 kN · CMC 0,24 % 3) - for compressive forces — 1 N to 3000 kN · CMC 0,12 % 2) - for compressive forces — 1 N to 3000 kN · CMC 0,24 % 3)
Force
At permanent location (S) and outside of it (P) PN-EN ISO 7500- 1:2018-05, ASTM E4-24
3 Extensometers Calibration — Force
0 mm to 25 mm · CMC 1,1 µm 4) 0 mm do 1500 mm · CMC 0,7 µm 5)
Force
At permanent location (S) and outside of it (P) PN-EN ISO 9513:2013-06, ASTM E83-25
4 Static testing machines
Technological devices
Calibration — Force
- crosshead displacement (travel) — 0 mm to 2500 mm · CMC 0,7 µm 5)
Force
At permanent location (S) and outside of it (P) ASTM E2309/E2309M-20, PN-EN ISO 9513:2013-06 Annex H
5 Static testing machines
Technological devices
Calibration — Force
- crosshead displacement speed — 0,01 mm/min to 1000 mm/min · CMC 0,05 % - crosshead displacement speed — 1000 mm/min to 2500 mm/min · CMC 0,1 %
Force
At permanent location (S) and outside of it (P) ASTM E2658-15 (2023)
6 Pendulum impact testers Calibration — Impact strength
0,5 J to 750 J · CMC 0,15 % K_N K_N – nominal energy of the pendulum in J
Impact strength
Outside of permanent location (P) PN EN ISO 148-2:2017-02E, ASTM E23-25, PN EN ISO 13802:2015-07
7 Brinell hardness testers Calibration — Hardness
- hardness — HBW 2,5 / 62,5 · CMC 1,5 % - hardness — HBW 2,5 / 187,5 · CMC 1,5 % - hardness — HBW 5 / 250 · CMC 1,5 % - hardness — HBW 5 / 750 · CMC 1,5 % - hardness — HBW 10 / 3000 · CMC 1,5 % - force — 9,807 N to 29420 N · CMC 0,12 % 2) - force — 9,807 N to 29420 N · CMC 0,24 % 3) - length — 0 mm to 1 mm · CMC 0,3 µm - length — 0 mm to 10 mm · CMC 0,3 µm
Hardness
Outside of permanent location (P) PN-EN ISO 6506-2:2019-10, ASTM E10-23
8 Vickers hardness testers Calibration — Hardness
- hardness — HV 0,1 · CMC 5,0 % - hardness — HV 0,2 · CMC 5,0 % - hardness — HV 0,3 · CMC 4,5 % - hardness — HV 0,5 · CMC 4,0 % - hardness — HV 1 · CMC 3,0 % - hardness — HV 2 · CMC 2,0 % - hardness — HV 3 · CMC 2,0 % - hardness — HV 5 · CMC 2,0 % - hardness — HV 10 · CMC 1,5 % - hardness — HV 20 · CMC 1,5 % - hardness — HV 30 · CMC 1,5 % - force — 0,9807 N to 980,7 N · CMC 0,12 % 2) - force — 0,9807 N to 980,7 N · CMC 0,24 % 3) - length — 0 mm to 1 mm · CMC 0,3 µm - length — 0 mm to 10 mm · CMC 0,3 µm
Hardness
Outside of permanent location (P) PN-EN ISO 6507-2:2018-05, ASTM E92-23, ASTM E384-22
9 Rockwell hardness testers Calibration — Hardness
- hardness — HRA · CMC 0,5 HRA - hardness — HRB · CMC 1,0 HRB - hardness — HRC · CMC 0,5 HRC - hardness — HR15N · CMC 0,6 HR15N - hardness — HR30N · CMC 0,6 HR30N - hardness — HR45N · CMC 0,6 HR45N - hardness — HR15T · CMC 1,0 HR15T - hardness — HR30T · CMC 1,0 HR30T - hardness — HR45T · CMC 1,0 HR45T - force — 29,42 N to 1471 N · CMC 0,12 % 2) - force — 29,42 N to 1471 N · CMC 0,24 % 3)
Hardness
Outside of permanent location (P) PN-EN ISO 6508-2:2024-06, ASTM E18-25

Reference standards (17)

ASTM E10-23
ASTM E18-25
ASTM E23-25
ASTM E2309/E2309M-20
ASTM E2658-15 (2023)
ASTM E384-22
ASTM E4-24
ASTM E83-25
ASTM E92-23
PN EN ISO 13802:2015-07
PN EN ISO 148-2:2017-02E
PN-EN ISO 6506-2:2019-10
PN-EN ISO 6507-2:2018-05
PN-EN ISO 6508-2:2024-06
PN-EN ISO 7500- 1:2018-05
PN-EN ISO 9513:2013-06
PN-EN ISO 9513:2013-06 zał. H

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20194