🇵🇱 Okręgowy Urząd Miar w Białymstoku PL

PCA AP 185 • Białystok, Poland • 4 calibration items

Metrology & calibration

Okręgowy Urząd Miar w Białymstoku is a calibration laboratory accredited by PCA under number AP 185 (Białystok, Poland). Its accreditation scope covers 4 calibration items in the following areas: Metrology & calibration. Calibrated items include: Luxmeters 1), Non-automatic electronic weighing instruments, Sound calibrators, Sound level meters. Most frequently used calibration principles: At permanent location (S), Internal procedure; At permanent location (S), Internal procedure; At permanent location (S) and outside of it (P).

At a glance

  • Accreditation number: PCA AP 185
  • Calibration items in scope: 4
  • Types of calibrated items: 4
  • Calibration principles used: 3
  • City: Białystok, Poland
  • Valid until: 31-12-2026
Accreditation number
AP 185
Accreditation body
PCA
Address
ul. Kopernika 89, 15-396 Białystok
City
Białystok, Poland
Division
Calibration Laboratories Group
Valid until
31-12-2026

What this laboratory calibrates (4)

Calibration principles (3)

Certificate information

Issue date
13.01.2025
Issue no.
5
Certificate date
28.11.2019
Accreditation cycle
27.12.2022 — 31.12.2026
Approved by
Katarzyna Wiśniewska

Accreditation scope — calibration items (4)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 %. A value expressed as a percentage is the relative measurement uncertainty and refers to the percentage of the value of the measurand.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Luxmeters 1) Calibration — Illuminance
5 lx to 5000 lx · CMC 2,0 %
Illuminance
Internal procedure; At permanent location (S) IW01.PR121.L3
2 Non-automatic electronic weighing instruments Calibration — Mass (weighing instruments)
up to 300 g · CMC 0,7 · d 300 g do 16 kg · CMC 0,7 · d 16 kg do 150 kg · CMC 0,7 · d 150 kg do 500 kg · CMC 0,7 · d
Mass (weighing instruments)
Internal procedure; At permanent location (S) and outside of it (P) IW01.M121.L1 IW01.M122.L1 based on EURAMET cg-18 v. 4.0
3 Sound level meters Calibration — Sound pressure (airborne sound)
− response of the sound level meter to the signal from a sound calibrator — relative to 20 μPa; 94 dB to 124 dB · CMC 0,3 dB − response of the sound level meter to electrical test signals — relative to 20 μPa, frequency range 20 Hz to 20 kHz; 0 dB to 135 dB · CMC 0,2 dB - free-field frequency response of the sound level meter — frequency: 31,5 Hz to 500 Hz · CMC 0,4 dB - free-field frequency response of the sound level meter — frequency: 1 kHz · CMC 0,3 dB - free-field frequency response of the sound level meter — frequency: 2 kHz · CMC 0,4 dB - free-field frequency response of the sound level meter — frequency: 4 kHz to 8 kHz · CMC 0,5 dB - free-field frequency response of the sound level meter — frequency: 16 kHz · CMC 0,6 dB
Sound pressure (airborne sound)
At permanent location (S) PN-EN 61672-3:2007
4 Sound calibrators Calibration — Sound pressure (airborne sound)
− sound pressure level — relative to 20 μPa, nominal frequency 1 kHz; 90 dB to 130 dB · CMC 0,10 dB
Sound pressure (airborne sound)
At permanent location (S) PN-EN 60942:2005

Reference standards (6)

EURAMET cg-18 v. 4.0
IW01.M121.L1
IW01.M122.L1
IW01.PR121.L3
PN-EN 60942:2005
PN-EN 61672-3:2007

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20185