🇵🇱 Wavin Polska S.A. PL
Metrology & calibration
Wavin Polska S.A. is a calibration laboratory accredited by PCA under number AP 167 (Buk, Poland). Its accreditation scope covers 6 calibration items in the following areas: Metrology & calibration. Calibrated items include: Dial thickness gauges with spherical measuring tips, Digital indicators with resolution of 0,01 mm, Double-sided calipers with depth gauge, External diameter tapes. Most frequently used calibration principles: Internal procedure; Direct method by comparison with gauge blocks;…, Internal procedure; Direct method by comparison with diameter stand…, Internal procedure; Direct method by comparison with a micrometer h….
At a glance
- Accreditation number: PCA AP 167
- Calibration items in scope: 6
- Types of calibrated items: 6
- Calibration principles used: 3
- City: Buk, Poland
- Valid until: 27-12-2028
- Accreditation number
- AP 167
- Accreditation body
- PCA
- Address
- ul. Dobieżyńska 43, 64-320 Buk
- City
- Buk, Poland
- Division
- Laboratorium Zakładowe
- Valid until
- 27-12-2028
What this laboratory calibrates (6)
- Dial thickness gauges with spherical measuring tips — 1 calibration item
- Digital indicators with resolution of 0,01 mm — 1 calibration item
- Double-sided calipers with depth gauge — 1 calibration item
- External diameter tapes — 1 calibration item
- Internal diameter tapes — 1 calibration item
- Micrometer heads — 1 calibration item
Calibration principles (3)
- Internal procedure; Direct method by comparison with gauge blocks; At permanent location (S) — 3 calibration items
- Internal procedure; Direct method by comparison with diameter standards; At permanent location (S) — 2 calibration items
- Internal procedure; Direct method by comparison with a micrometer head; At permanent location (S) — 1 calibration item
Certificate information
- Issue date
- 18.12.2024
- Issue no.
- 5
- Certificate date
- 21.02.2020
- Accreditation cycle
- 18.12.2024 — 27.12.2028
- Approved by
- Tadeusz Matras
Accreditation scope — calibration items (6)
| No. | Calibrated quantity / subject of calibration | Nominal range / parameters / CMC | Calibration principle | Calibration procedure | |
|---|---|---|---|---|---|
| Calibration items | |||||
| 1 | Digital indicators with resolution of 0,01 mm | Calibration — Length 0 mm to 50 mm · CMC 7 μm Length |
Internal procedure; Direct method by comparison with a micrometer head; At permanent location (S) | LZ M – 3 | |
| 2 | Micrometer heads | Calibration — Length 0 mm to 50 mm · CMC 2,1 μm Length |
Internal procedure; Direct method by comparison with gauge blocks; At permanent location (S) | LZ M – 2 | |
| 3 | Dial thickness gauges with spherical measuring tips | Calibration — Length 0 mm to 50 mm · CMC 15 μm Length |
Internal procedure; Direct method by comparison with gauge blocks; At permanent location (S) | LZ M – 5 | |
| 4 | Double-sided calipers with depth gauge | Calibration — Length 0 mm to 200 mm · CMC 25 μm Length |
Internal procedure; Direct method by comparison with gauge blocks; At permanent location (S) | LZ M – 1 | |
| 5 | Internal diameter tapes | Calibration — Length 200 mm to 400 mm · CMC 70 μm 400 mm to 980 mm · CMC 110 μm Length |
Internal procedure; Direct method by comparison with diameter standards; At permanent location (S) | LZ M – 4 | |
| 6 | External diameter tapes | Calibration — Length 15 mm to 400 mm · CMC 70 μm 400 mm to 1100 mm · CMC 110 μm Length |
Internal procedure; Direct method by comparison with diameter standards; At permanent location (S) | LZ M – 4 | |
Reference standards (5)
LZ M – 1
LZ M – 2
LZ M – 3
LZ M – 4
LZ M – 5