🇵🇱 STEMAD s.c. Weronika Madej, Andrzej Madej PL

PCA AP 165 • Czeladź, Poland • 19 calibration items

Metrology & calibration

STEMAD s.c. Weronika Madej, Andrzej Madej is a calibration laboratory accredited by PCA under number AP 165 (Czeladź, Poland). Its accreditation scope covers 19 calibration items in the following areas: Metrology & calibration. Calibrated items include: Multimeters, Data acquisition cards, Power supplies, Power network parameter meters. Most frequently used calibration principles: Internal procedure; direct method; At permanent location (S) and ou…, Internal procedure; At permanent location (S) and outside of it (P), Internal procedure; direct method high AC voltage; At permanent loc….

At a glance

  • Accreditation number: PCA AP 165
  • Calibration items in scope: 19
  • Types of calibrated items: 33
  • Calibration principles used: 6
  • City: Czeladź, Poland
  • Valid until: 09-08-2028
Accreditation number
AP 165
Accreditation body
PCA
Address
ul. 3 Kwietnia 21, 41-253 Czeladź
City
Czeladź, Poland
Division
Measurement Laboratory
Valid until
09-08-2028

What this laboratory calibrates (33)

Calibration principles (6)

Certificate information

Issue date
09.07.2026
Issue no.
11
Certificate date
29.07.2020
Accreditation cycle
18.07.2024 — 09.08.2028
Approved by
Katarzyna Wiśniewska

Accreditation scope — calibration items (19)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units. A CMC uncertainty value expressed as a percentage is the relative measurement uncertainty and refers to the percentage of the value of the measurand.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Generators
Calibrators
Data acquisition cards
Analogue voltmeters
Digital voltmeters
Multimeters
Oscilloscopes
Power supplies
Calibration — DC voltage
0 mV to 10 mV · CMC 0,5 µV 10 mV to 120 mV · CMC 1,3·10⁻⁵ · U + 0,2 µV 0,12 V to 1,2 V · CMC 1·10⁻⁵ · U + 0,7 µV 1,2 V to 12 V · CMC 1·10⁻⁵ · U + 7 µV 12 V to 120 V · CMC 1,2·10⁻⁵ · U + 0,09 mV 120 V to 1050 V · CMC 1,2·10⁻⁵ · U + 1,4 mV
DC voltage
Internal procedure; At permanent location (S) and outside of it (P) PW-04 based on EURAMET cg-15 v.3.0
2 Breakdown voltage meters
Breakdown testers
Power supplies
Calibration — DC voltage
0,01 kV to 40 kV · CMC 1·10⁻³ · U
DC voltage
Internal procedure; direct method; At permanent location (S) and outside of it (P) PW-06
3 Calibrators
Data acquisition cards
Clamp meters
Analogue ammeters
Digital ammeters
Multimeters
Measuring probes
Power supplies
Calibration — DC current
10 µA to 120 µA · CMC 3·10⁻⁵ · I + 1 nA 0,12 mA to 1,2 mA · CMC 2·10⁻⁵ · I + 5 nA 1,2 mA to 12 mA · CMC 3·10⁻⁵ · I + 0,05 µA 12 mA to 120 mA · CMC 2·10⁻⁵ · I + 0,2 µA 0,12 A to 1,05 A · CMC 2·10⁻⁴ · I + 15 µA 1,05 A to 120 A · CMC 7,5·10⁻⁵ · I + 1 mA 120 A to 600 A · CMC 7,5·10⁻⁵ · I + 5 mA 600 A to 1200 A · CMC 1·10⁻⁴ · I + 10 mA
DC current
Internal procedure; At permanent location (S) and outside of it (P) PW-04 based on EURAMET cg-15 v.3.0
4 Generators
Calibrators
Data acquisition cards
Analogue voltmeters
Digital voltmeters
Multimeters
Power supplies
Calibration — AC voltage
40 Hz to 1 kHz — 1 mV to 12 mV · CMC 4·10⁻⁴ · U + 3 µV 40 Hz to 1 kHz — 12 mV to 120 mV · CMC 2·10⁻⁴ · U + 3 µV 40 Hz to 1 kHz — 0,12 V to 1,2 V · CMC 1,2·10⁻⁴ · U + 0,03 mV 40 Hz to 1 kHz — 1,2 V to 12 V · CMC 1,2·10⁻⁴ · U + 0,3 mV 40 Hz to 1 kHz — 12 V to 120 V · CMC 3·10⁻⁴ · U + 2 mV 40 Hz to 1 kHz — 120 V to 1050 V · CMC 5,5·10⁻⁴ · U + 0,05 V 1 kHz to 20 kHz — 1 mV to 12 mV · CMC 5·10⁻⁴ · U + 3 µV 1 kHz to 20 kHz — 12 mV to 120 mV · CMC 3·10⁻⁴ · U + 3 µV 1 kHz to 20 kHz — 0,12 V to 1,2 V · CMC 3·10⁻⁴ · U + 0,02 mV 1 kHz to 20 kHz — 1,2 V to 12 V · CMC 3·10⁻⁴ · U + 0,2 mV 1 kHz to 20 kHz — 12 V to 120 V · CMC 3·10⁻⁴ · U + 3 mV 1 kHz to 20 kHz — 120 V to 700 V · CMC 8·10⁻⁴ · U + 40 mV
AC voltage
Internal procedure; At permanent location (S) and outside of it (P) PW-04 based on EURAMET cg-15 v.3.0
5 Oscilloscopes
Scopemeters
Calibration — AC voltage
40 Hz to 20 kHz — 0,001 V to 300 V · CMC 4 · 10⁻³ · U 20 kHz to 125 MHz — 0,001 V to 3 V · CMC 1,7 · 10⁻² · U
AC voltage
Internal procedure; At permanent location (S) and outside of it (P) PW-01 based on EURAMET cg-7 v.1.0
6 Breakdown voltage meters
Breakdown testers
Power supplies
Calibration — AC voltage
50 Hz to 60 Hz — 0,01 kV to 40 kV · CMC 2,5·10⁻³ · U
AC voltage
Internal procedure; direct method; At permanent location (S) and outside of it (P) PW-06
7 Calibrators
Data acquisition cards
Clamp meters
Analogue ammeters
Digital ammeters
Multimeters
Measuring probes
Power supplies
Calibration — AC current
50 Hz to 60 Hz — 10 µA to 100,5 µA · CMC 8 · 10⁻⁴ · I + 15 nA 50 Hz to 60 Hz — 0,1005 mA to 1,05 mA · CMC 8 · 10⁻⁴ · I + 0,15 µA 50 Hz to 60 Hz — 1,05 mA to 10,5 mA · CMC 6,2 · 10⁻⁴ · I + 1,5 µA 50 Hz to 60 Hz — 10,5 A to 105 mA · CMC 6,2 · 10⁻⁴ · I + 15 µA 50 Hz to 60 Hz — 0,105 A to 1,05 A · CMC 9 · 10⁻⁴ · I + 0,18 mA 50 Hz to 60 Hz — 1,05 A to 30 A · CMC 2 · 10⁻⁴ · I + 1 mA 50 Hz to 60 Hz — 30 A to 300 A · CMC 2,5 · 10⁻⁴ · I + 1 mA 50 Hz to 60 Hz — 300 A to 1200 A · CMC 2,5 · 10⁻⁴ · I + 0,05 A
AC current
Internal procedure; At permanent location (S) and outside of it (P) PW-04 based on EURAMET cg-15 v.3.0
8 Calibrators
Data acquisition cards
Analogue ammeters
Digital ammeters
Multimeters
Power supplies
Calibration — AC current
1 kHz — 10 µA to 100,5 µA · CMC 6,2·10⁻⁴ · I + 14 nA 1 kHz — 0,1005 mA to 1,05 mA · CMC 6,2·10⁻⁴ · I + 0,15 µA 1 kHz — 1,05 mA to 10,5 mA · CMC 6,2·10⁻⁴ · I + 1,5 µA 1 kHz — 10,5 mA to 105 mA · CMC 6,2·10⁻⁴ · I + 15 µA 1 kHz — 0,105 A to 1,05 A · CMC 9·10⁻⁴ · I + 0,18 mA 1 kHz — 1,05 A to 10,5 A · CMC 1,5·10⁻³ · I + 3,5 mA 1 kHz — 10,5 A to 30,5 A · CMC 1,5·10⁻³ · I + 10 mA
AC current
Internal procedure; At permanent location (S) and outside of it (P) PW-04 based on EURAMET cg-15 v.3.0
9 Resistance calibrators
Data acquisition cards
Analogue ohmmeters
Digital ohmmeters
Power network parameter meters
Insulation resistance meters
Multimeters
Calibration — DC resistance
0,001 Ω to 1,2 Ω · CMC 2,8·10⁻⁵ · R + 7 µΩ 1,2 Ω to 12 Ω · CMC 1,9·10⁻⁵ · R + 34 µΩ 12 Ω to 120 Ω · CMC 1,7·10⁻⁵ · R + 0,1 mΩ 0,12 kΩ to 1,2 kΩ · CMC 1,5·10⁻⁵ · R + 0,9 mΩ 1,2 kΩ to 12 kΩ · CMC 1,8·10⁻⁵ · R + 9 mΩ 12 kΩ to 120 kΩ · CMC 1,8·10⁻⁵ · R + 1 Ω 0,12 MΩ to 1,2 MΩ · CMC 2,2·10⁻⁵ · R + 2,3 Ω 1,2 MΩ to 12 MΩ · CMC 2,8·10⁻⁵ · R + 0,1 kΩ 12 MΩ to 90 MΩ · CMC 2·10⁻⁴ · R 90 MΩ to 900 MΩ · CMC 6·10⁻⁴ · R 0,9 GΩ to 9 GΩ · CMC 2,5·10⁻³ · R 9 GΩ to 1000 GΩ · CMC 2,7·10⁻² · R Fixed points: — 0,0001 Ω · CMC 2·10⁻³ · R Fixed points: — 0,001 Ω · CMC 2·10⁻⁴ · R Fixed points: — 0,01 Ω; 0,1 Ω · CMC 1·10⁻⁴ · R Fixed points: — 1Ω; 10Ω; 100Ω; 1kΩ; 10kΩ; 100kΩ · CMC 3·10⁻⁵ · R Fixed points: — 1 MΩ · CMC 6·10⁻⁵ · R Fixed points: — 1 GΩ · CMC 2·10⁻³ · R Fixed points: — 10 GΩ · CMC 5·10⁻³ · R Fixed points: — 50 GΩ; 100 GΩ; 200 GΩ · CMC 1·10⁻² · R Fixed points: — 250 GΩ; 500 GΩ; 1 TΩ · CMC 2,5·10⁻² · R
DC resistance
Internal procedure; At permanent location (S) and outside of it (P) PW-04 based on EURAMET cg-15 v.3.0
10 Analogue ohmmeters
Digital ohmmeters
Power network parameter meters
Insulation resistance meters
Multimeters
Calibration — DC resistance
100 Ω to 1000 kΩ · CMC 2·10⁻⁴ · R 1 MΩ to 15 MΩ · CMC 5·10⁻⁴ · R 20 MΩ to 90 MΩ · CMC 1·10⁻³ · R 0,1 GΩ to 2 GΩ · CMC 2·10⁻³ · R 5 GΩ to 20 GΩ · CMC 5·10⁻³ · R 50 GΩ to 200 GΩ · CMC 1·10⁻² · R 0,25 TΩ to 1 TΩ · CMC 2,5·10⁻² · R
DC resistance
Internal procedure; direct method; At permanent location (S) and outside of it (P) PW-02
11 Resistance calibrators
Data acquisition cards
Oscilloscopes
Scopemeters
Fixed resistors
Variable resistors
Resistance standards
Calibration — DC resistance
0,001 kΩ to 1,2 Ω · CMC 2,8·10⁻⁵ · R + 7 µΩ 1,2 Ω to 12 Ω · CMC 1,9·10⁻⁵ · R + 34 µΩ 12 Ω to 120 Ω · CMC 1,7·10⁻⁵ · R + 0,1 mΩ 0,12 kΩ to 1,2 kΩ · CMC 1,5·10⁻⁵ · R + 0,9 mΩ 1,2 kΩ to 12 kΩ · CMC 1,8·10⁻⁵ · R + 9 mΩ 12 kΩ to 120 kΩ · CMC 1,8·10⁻⁵ · R + 1 Ω 0,12 MΩ to 1,2 MΩ · CMC 2,2·10⁻⁵ · R + 2,3 Ω 1,2 MΩ to 12 MΩ · CMC 2,8·10⁻⁵ · R + 0,1 kΩ 12 MΩ to 90 MΩ · CMC 2·10⁻⁴ · R 90 MΩ to 900 MΩ · CMC 6·10⁻⁴ · R 0,9 GΩ to 9 GΩ · CMC 2,5·10⁻⁴ · R 9 GΩ to 1000 GΩ · CMC 2,7·10⁻² · R
DC resistance
Internal procedure; direct method; At permanent location (S) and outside of it (P) PW-05
12 Power network parameter meters
Analogue ohmmeters
Digital ohmmeters
Bridges
Multimeters
Calibration — AC resistance
50 Hz — 0,1 Ω to 100 kΩ · CMC 5·10⁻⁴ · R 50 Hz to 1 kHz — 0,001 Ω; 0,01 Ω; 0,1 Ω · CMC 3·10⁻³ · R 50 Hz to 1 kHz — 1 Ω; 10 Ω; 100 Ω; 1 kΩ; · CMC 2·10⁻³ · R 50 Hz to 1 kHz — 10 kΩ; 100 kΩ · CMC 2·10⁻³ · R
AC resistance
Internal procedure; direct method; At permanent location (S) and outside of it (P) PW-03
13 Protective conductor (PE) resistance meters
Power network parameter meters
Electrical safety testers
Calibration — AC resistance
50 Hz — 10 mΩ to 1000 mΩ · CMC 5·10⁻³ · R
AC resistance
Internal procedure; direct method; At permanent location (S) and outside of it (P) PW-03
14 Kilovoltmeters Calibration — High voltage and current
0,01 kV to 6 kV · CMC 1·10⁻³ · U
High voltage and current
Internal procedure; direct method high DC voltage; At permanent location (S) PW-06
15 Power network parameter meters
Breakdown testers
Electrical safety testers
Voltage sources
Calibration — High voltage and current
0,01 kV to 40 kV · CMC 1·10⁻³ · U
High voltage and current
Internal procedure; direct method high DC voltage; At permanent location (S) and outside of it (P) PW-06
16 Kilovoltmeters Calibration — High voltage and current
50 kHz to 60 kHz — 0,01 kV to 5 kV · CMC 2,5·10⁻³ · U
High voltage and current
Internal procedure; direct method high AC voltage; At permanent location (S) PW-06
17 Power network parameter meters
Breakdown testers
Electrical safety testers
Voltage sources
Calibration — High voltage and current
50 kHz to 60kHz — 0,01 kV to 40 kV · CMC 2,5·10⁻³ · U
High voltage and current
Internal procedure; direct method high AC voltage; At permanent location (S) and outside of it (P) PW-06
18 Period meters
Period generators
Oscilloscopes
Calibration — Time (time interval)
3,3 ns to 1 s · CMC 1,5·10⁻⁶ · t + 100 ps
Time (time interval)
Internal procedure; direct method; At permanent location (S) and outside of it (P) PW-01
19 Frequency generators
Quartz generators
Digital frequency meters
Oscilloscopes
Calibration — Frequency
1 Hz to 2,7 GHz · CMC 1·10⁻⁶ · f + 15 µHz
Frequency
Internal procedure; direct method; At permanent location (S) and outside of it (P) PW-01

Reference standards (8)

EURAMET cg-15 v.3.0
EURAMET cg-7 v.1.0
PW-01
PW-02
PW-03
PW-04
PW-05
PW-06

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20165