🇵🇱 ARKOM-LAB Sp. z o.o. PL

PCA AP 154 • Rzeszów, Poland • 78 calibration items

Metrology & calibration

ARKOM-LAB Sp. z o.o. is a calibration laboratory accredited by PCA under number AP 154 (Rzeszów, Poland). Its accreditation scope covers 78 calibration items in the following areas: Metrology & calibration. Calibrated items include: Special gauges, 90° cylindrical squares, 90° try squares, Analogue dial gauges with a scale interval of 0,001 mm. Most frequently used calibration principles: Internal procedure; using OPTIMAR; At permanent location (S), Internal procedure; using the O-Inspect coordinate measuring machin…, Internal procedure; using gauge blocks; At permanent location (S).

At a glance

  • Accreditation number: PCA AP 154
  • Calibration items in scope: 78
  • Types of calibrated items: 77
  • Calibration principles used: 15
  • City: Rzeszów, Poland
  • Valid until: 15-10-2029
Accreditation number
AP 154
Accreditation body
PCA
Address
ul. Hanasiewicza 14, 35-103 Rzeszów
City
Rzeszów, Poland
Valid until
15-10-2029

What this laboratory calibrates (77)

Calibration principles (15)

Certificate information

Issue date
30.07.2026
Issue no.
20
Certificate date
30.05.2025
Accreditation cycle
16.09.2025 — 15.10.2029
Approved by
Katarzyna Wiśniewska

Accreditation scope — calibration items (78)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Gauge blocks class 0, 1, 2 Calibration — Length
0,5 mm to 175 mm · CMC (0,06 + 0,0007 · L) µm
Length
Internal procedure; using a MAHR comparator and class K gauge blocks; At permanent location (S) Internal procedure IW-1-LW-AK-01 based on the standard PN-EN ISO 3650:2000
2 Setting rings Calibration — Length
- ring diameter — 0,8 mm to 50 mm · CMC 1,3 µm - ring diameter — 50 mm to 100 mm · CMC 1,4 µm - ring diameter — 100 mm to 200 mm · CMC 1,5 µm - ring diameter — 200 mm to 300 mm · CMC 1,9 µm
Length
Internal procedure; using a MAHR horizontal length measuring machine and setting rings; At permanent location (S) Internal procedure IW-2-LW-AK-01
3 Cylindrical thread plug gauges and check plugs Calibration — Length
- pitch diameter — 1 mm to 100 mm · CMC 3,0 µm - pitch diameter — 100 mm to 200 mm · CMC 3,1 µm - pitch diameter — 200 mm to 300 mm · CMC 3,4 µm
Length
Internal procedure; using a MAHR horizontal length measuring machine and measuring rollers; At permanent location (S) Internal procedure IW-2-LW-AK-02
4 Cylindrical thread ring gauges Calibration — Length
- pitch diameter — 2,4 mm to 100 mm · CMC 3,1 µm - pitch diameter — 100 mm to 200 mm · CMC 3,2 µm - pitch diameter — 200 mm to 300 mm · CMC 3,5 µm
Length
Internal procedure; using a MAHR horizontal length measuring machine and setting rings; At permanent location (S) Internal procedure IW-2-LW-AK-03
5 Taper thread plug gauges Calibration — Length
- pitch diameter — 4 mm to 100 mm · CMC 5,0 µm - pitch diameter — 100 mm to 200 mm · CMC 6,7 µm
Length
Internal procedure; using a MAHR horizontal length measuring machine and setting rings; At permanent location (S) Internal procedure IW-2-LW-AK-04
6 Taper thread ring gauges Calibration — Length
- pitch diameter — 4 mm to 100 mm · CMC 5,0 µm - pitch diameter — 100 mm to 200 mm · CMC 6,7 µm
Length
Internal procedure; using a MAHR horizontal length measuring machine and setting rings; At permanent location (S) Internal procedure IW-2-LW-AK-05
7 Plug gauges Calibration — Length
- plug diameter — 0,2 mm to 100 mm · CMC 1,0 µm - plug diameter — 100 mm to 200 mm · CMC 1,3 µm - plug diameter — 200 mm to 300 mm · CMC 1,6 µm
Length
Internal procedure; using a MAHR horizontal length measuring machine and a reference plug; At permanent location (S) Internal procedure IW-2-LW-AK-06
8 Plain ring gauges Calibration — Length
- ring diameter — 0,8 mm to 50 mm · CMC 1,3 µm - ring diameter — 50 mm to 100 mm · CMC 1,4 µm - ring diameter — 100 mm to 200 mm · CMC 1,5 µm - ring diameter — 200 mm to 300 mm · CMC 1,9 µm
Length
Internal procedure; using a MAHR horizontal length measuring machine and setting rings; At permanent location (S) Internal procedure IW-2-LW-AK-07
9 Analogue dial gauges with a scale interval of 0,001 mm Calibration — Length
0 mm to 5 mm · CMC 0,6 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK 01
10 Analogue dial gauges with a scale interval of 0,002 mm Calibration — Length
0 mm to 3 mm · CMC 0,6 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-01
11 Analogue dial gauges with a scale interval of 0,005 mm Calibration — Length
0 mm to 10 mm · CMC 0,7 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-01
12 Analogue dial gauges with a scale interval of 0,01 mm Calibration — Length
0 mm to 10 mm · CMC 1,2 µm 10 mm to 100 mm · CMC 2,1 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-01
13 Analogue dial gauges with a scale interval of 0,1 mm Calibration — Length
0 mm to 100 mm · CMC 8,3 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-01
14 Digital dial gauges and digital micrometer-type gauges with a resolution of 0,0002 mm Calibration — Length
0 mm to 10 mm · CMC 0,5 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
15 Digital dial gauges with a resolution of 0,0002 mm Calibration — Length
10 mm to 100 mm · CMC 0,7 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
16 Digital dial gauges and digital micrometer-type gauges with a resolution of 0,0005 mm Calibration — Length
0 mm to 10 mm · CMC 0,6 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
17 Digital dial gauges with a resolution of 0,0005 mm Calibration — Length
10 mm to 100 mm · CMC 0,8 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
18 Digital dial gauges and digital micrometer-type gauges with a resolution of 0,001 mm Calibration — Length
0 mm to 10 mm · CMC 0,6 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
19 Digital dial gauges with a resolution of 0,001 mm Calibration — Length
10 mm to 100 mm · CMC 1,5 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
20 Digital dial gauges and digital micrometer-type gauges with a resolution of 0,002 mm Calibration — Length
0 mm to 10 mm · CMC 1,3 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
21 Digital dial gauges with a resolution of 0,002 mm Calibration — Length
10 mm to 100 mm · CMC 1,4 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
22 Digital dial gauges and digital micrometer-type gauges with a resolution of 0,005 mm Calibration — Length
0 mm to 10 mm · CMC 1,3 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
23 Digital dial gauges with a resolution of 0,005 mm Calibration — Length
10 mm to 100 mm · CMC 1,4 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
24 Digital dial gauges and digital micrometer-type gauges with a resolution of 0,01 mm Calibration — Length
0 mm to 10 mm · CMC 1,8 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
25 Digital dial gauges with a resolution of 0,01 mm Calibration — Length
10 mm to 100 mm · CMC 2,1 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
26 Digital dial gauges and digital micrometer-type gauges with a resolution of 0,02 mm Calibration — Length
0 mm to 10 mm · CMC 5,8 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
27 Digital dial gauges with a resolution of 0,02 mm Calibration — Length
10 mm to 100 mm · CMC 5,9 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
28 Digital dial gauges with a resolution of 0,05 mm Calibration — Length
0 mm to 100 mm · CMC 14,5 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
29 Digital dial gauges with a resolution of 0,1 mm Calibration — Length
0 mm to 100 mm · CMC 28,9 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
30 Digital dial gauges with a resolution of 0,2 mm Calibration — Length
0 mm to 100 mm · CMC 57,8 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-02
31 Lever-type analogue dial gauges with a scale interval of 0,001 mm Calibration — Length
0 mm to 0,6 mm · CMC 0,6 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-03
32 Lever-type analogue dial gauges with a scale interval of 0,002 mm Calibration — Length
0 mm to 1,2 mm · CMC 0,6 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-03
33 Lever-type analogue dial gauges with a scale interval of 0,01 mm Calibration — Length
0 mm to 3 mm · CMC 1,2 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-03
34 Lever-type analogue dial gauges with a scale interval of 0,02 mm Calibration — Length
0 mm to 2 mm · CMC 1,7 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-03
35 Lever-type digital dial gauges with a resolution of 0,001 mm Calibration — Length
0 mm to 2 mm · CMC 0,7 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-04
36 Lever-type digital dial gauges with a resolution of 0,01 mm Calibration — Length
0 mm to 2 mm · CMC 1,2 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-04
37 Lever-gear analogue dial gauges with a scale interval of 0,0002 mm Calibration — Length
-0,015 mm to 0,015 mm · CMC 0,5 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-05
38 Lever-gear analogue dial gauges with a scale interval of 0,0005 mm Calibration — Length
-0,025 mm to 0,025 mm · CMC 0,5 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-05
39 Lever-gear analogue dial gauges with a scale interval of 0,001 mm Calibration — Length
-0,10 mm to 0,10 mm · CMC 0,5 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-05
40 Lever-gear analogue dial gauges with a scale interval of 0,002 mm Calibration — Length
-0,13 mm to 0,13 mm · CMC 0,5 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-05
41 Lever-gear analogue dial gauges with a scale interval of 0,005 mm Calibration — Length
-0,20 mm to 0,20 mm · CMC 0,7 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-05
42 Lever-gear analogue dial gauges with a scale interval of 0,01 mm Calibration — Length
-1,0 mm to 1,0 mm · CMC 1,0 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-05
43 Lever-gear analogue dial gauges with a scale interval of 0,05 mm Calibration — Length
-1,5 mm to 1,5 mm · CMC 4,1 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-05
44 Lever-gear analogue dial gauges with a scale interval of 0,1 mm Calibration — Length
-4,0 mm to 4,0 mm · CMC 8,2 µm
Length
Internal procedure; using OPTIMAR; At permanent location (S) Internal procedure IW-3-LW-AK-05
45 Two-point and three-point inside micrometers Calibration — Length
2 mm to 100 mm · CMC 2,3 µm 100 mm to 300 mm · CMC 2,8 µm
Length
Internal procedure; using setting rings; At permanent location (S) Internal procedure IW-8-LW-AK-01
46 Test sieves Calibration — Length
0,02 mm to 25 mm · CMC 4 µm 25 mm to 125 mm · CMC 8 µm
Length
Internal procedure; measurement using a coordinate measuring machine; At permanent location (S) Internal procedure IW-9-LW-AK-02 based on PN-ISO 3310-1:2000 PN-ISO 3310-2:2000 PN-ISO 3310-3:2000 PN-EN 933-3:2012 ASTM E11-24
47 Vernier calipers Calibration — Length
0 mm do 150 mm · CMC 14 µm 0 mm do 300 mm · CMC 15 µm 0 mm do 500 mm · CMC 17 µm 0 mm to 600 mm · CMC 20 µm 0 mm do 800 mm · CMC 20 µm 0 mm to 1000 mm · CMC 22 µm
Length
At permanent location (S) PN-EN ISO 13385-1:2019
48 Vernier height gauges Calibration — Length
0 mm do 150 mm · CMC 14 µm 0 mm do 300 mm · CMC 15 µm 0 mm do 500 mm · CMC 17 µm 0 mm to 600 mm · CMC 20 µm 0 mm do 800 mm · CMC 20 µm 0 mm to 1000 mm · CMC 22 µm
Length
At permanent location (S) PN-EN ISO 13225-1:2020
49 Vernier depth gauges Calibration — Length
0 mm to 150 mm · CMC 14 µm 0 mm to 300 mm · CMC 15 µm 0 mm to 500 mm · CMC 17 µm
Length
At permanent location (S) PN-EN ISO 13385:2020
50 External micrometers Calibration — Length
0 mm to 25 mm · CMC 1,0 µm 25 mm to 50 mm · CMC 1,2 µm 50 mm to 75 mm · CMC 1,5 µm 75 mm to 100 mm · CMC 1,8 µm 100 mm to 125 mm · CMC 2,1 µm 125 mm to 150 mm · CMC 2,4 µm 150 mm to 175 mm · CMC 2,7 µm 175 mm to 200 mm · CMC 3,0 µm 200 mm do 225 mm · CMC 3,4 µm 225 mm do 250 mm · CMC 3,7 µm 250 mm do 275 mm · CMC 4,1 µm 275 mm do 300 mm · CMC 4,4 µm 300 mm do 325 mm · CMC 4,7 µm 325 mm do 350 mm · CMC 5,1 µm 350 mm do 375 mm · CMC 5,4 µm 375 mm do 400 mm · CMC 5,7 µm 400 mm do 425 mm · CMC 6,1 µm 425 mm do 450 mm · CMC 6,4 µm 450 mm do 475 mm · CMC 6,8 µm 475 mm do 500 mm · CMC 7,1 µm
Length
At permanent location (S) PN-EN ISO 3611:2023
51 Internal micrometers Calibration — Length
5 mm to 100 mm · CMC 2,3 µm
Length
Internal procedure; using setting rings; At permanent location (S) Internal procedure IW-10-LW-AK-01
52 Micrometer depth gauges Calibration — Length
0 mm to 25 mm · CMC 1,0 µm 25 mm to 50 mm · CMC 1,2 µm 50 mm to 75 mm · CMC 1,5 µm 75 mm to 100 mm · CMC 1,8 µm 100 mm to 125 mm · CMC 2,1 µm 125 mm to 150 mm · CMC 2,4 µm 150 mm to 175 mm · CMC 2,7 µm 175 mm to 200 mm · CMC 3,0 µm 200 mm do 225 mm · CMC 3,4 µm 225 mm do 250 mm · CMC 3,7 µm 250 mm do 275 mm · CMC 4,1 µm 275 mm do 300 mm · CMC 4,4 µm 300 mm do 325 mm · CMC 4,7 µm 325 mm do 350 mm · CMC 5,1 µm 350 mm do 375 mm · CMC 5,4 µm 375 mm do 400 mm · CMC 5,7 µm 400 mm do 425 mm · CMC 6,1 µm 425 mm do 450 mm · CMC 6,4 µm 450 mm do 475 mm · CMC 6,8 µm 475 mm do 500 mm · CMC 7,1 µm
Length
Internal procedure; using gauge blocks; At permanent location (S) Internal procedure IW-11-LW-AK-01
53 Dial depth gauges with analogue reading, scale interval: Calibration — Length
- 0,001 mm — 0 mm to 5 mm · CMC 0,6 µm - 0,002 mm — 0 mm to 5 mm · CMC 0,6 µm - 0,005 mm — 0 mm to 10 mm · CMC 0,7 µm - 0,01 mm — 0 mm to 10 mm · CMC 1,2 µm - 0,01 mm — 10 mm to 100 mm · CMC 2,1 µm - 0,1 mm — 0 mm to 100 mm · CMC 8,3 µm
Length
Internal procedure; using OPTIMAR and the O-Inspect coordinate measuring machine; At permanent location (S) Internal procedure IW-6-LW-AK 01
54 Dial depth gauges with digital reading, resolution: Calibration — Length
- 0,0002 mm — 0 mm to 10 mm · CMC 0,5 µm - 0,0002 mm — 10 mm to 100 mm · CMC 0,7 µm - 0,0005 mm — 0 mm to 10 mm · CMC 0,5 µm - 0,0005 mm — 10 mm to 100 mm · CMC 0,7 µm - 0,001 mm — 0 mm to 10 mm · CMC 0,6 µm - 0,001 mm — 10 mm to 100 mm · CMC 1,5 µm - 0,002 mm — 0 mm to 10 mm · CMC 1,3 µm - 0,002 mm — 10 mm to 100 mm · CMC 1,4 µm - 0,005 mm — 0 mm to 10 mm · CMC 1,3 µm - 0,005 mm — 10 mm to 100 mm · CMC 1,4 µm - 0,01 mm — 0 mm to 10 mm · CMC 1,8 µm - 0,01 mm — 10 mm to 100 mm · CMC 2,1 µm - 0,02 mm — 0 mm to 100 mm · CMC 5,9 µm - 0,05 mm — 0 mm to 100 mm · CMC 14,5 µm - 0,1 mm — 0 mm to 100 mm · CMC 28,9 µm - 0,2 mm — 0 mm to 100 mm · CMC 57,8 µm
Length
Internal procedure; using OPTIMAR and the O-Inspect coordinate measuring machine; At permanent location (S) Internal procedure IW-6-LW-AK 01
55 Dial thickness gauges with an analogue indicator, scale interval: Calibration — Length
- 0,001 mm — 0 mm to 5 mm · CMC 1,0 µm - 0,002 mm — 0 mm to 10 mm · CMC 1,0 µm - 0,005 mm — 0 mm to 10 mm · CMC 1,1 µm - 0,005 mm — 0 mm to 50 mm · CMC 1,3 µm - 0,005 mm — 0 mm to 75 mm · CMC 1,5 µm - 0,005 mm — 0 mm to 100 mm · CMC 1,8 µm - 0,01 mm — 0 mm to 25 mm · CMC 1,5 µm - 0,01 mm — 0 mm to 50 mm · CMC 1,6 µm - 0,01 mm — 0 mm to 75 mm · CMC 1,8 µm - 0,01 mm — 0 mm to 100 mm · CMC 2,0 µm - 0,1 mm — 0 mm to 60 mm · CMC 5,9 µm - 0,1 mm — 0 mm to 100 mm · CMC 6,0 µm
Length
Internal procedure; using gauge blocks; At permanent location (S) Internal procedure IW-10-LW-AK-02
56 Dial thickness gauges with a digital indicator, resolution: Calibration — Length
- 0,001 mm — 0 mm to 25 mm · CMC 1,2 µm - 0,001 mm — 0 mm to 50 mm · CMC 1,4 µm - 0,001 mm — 0 mm to 75 mm · CMC 1,6 µm - 0,001 mm — 0 mm to 100 mm · CMC 1,9 µm - 0,002 mm — 0 mm to 25 mm · CMC 1,6 µm - 0,002 mm — 0 mm to 50 mm · CMC 1,7 µm - 0,002 mm — 0 mm to 75 mm · CMC 1,9 µm - 0,002 mm — 0 mm to 100 mm · CMC 2,1 µm - 0,005 mm — 0 mm to 50 mm · CMC 3,2 µm - 0,005 mm — 0 mm to 75 mm · CMC 3,3 µm - 0,005 mm — 0 mm to 100 mm · CMC 3,4 µm - 0,01 mm — 0 mm to 50 mm · CMC 5,9 µm - 0,01 mm — 0 mm to 100 mm · CMC 6,0 µm
Length
Internal procedure; using gauge blocks; At permanent location (S) Internal procedure IW-10-LW-AK-02
57 External calipers Calibration — Length
0 mm to 200 mm · CMC 3,5 µm
Length
Internal procedure; using gauge blocks; At permanent location (S) Internal procedure IW-10-LW-AK-03
58 Internal calipers Calibration — Length
2 mm do 25 mm · CMC 1,1 µm 25 mm to 50 mm · CMC 1,3 µm 50 mm to 75 mm · CMC 1,5 µm 75 mm to 100 mm · CMC 1,8 µm 100 mm do 150 mm · CMC 2,3 µm 150 mm do 200 mm · CMC 3,0 µm 200 mm do 250 mm · CMC 3,7 µm 250 mm do 300 mm · CMC 4,3 µm
Length
Internal procedure; using gauge blocks; At permanent location (S) Internal procedure IW-10-LW-AK-03
59 Leaf feeler gauges Calibration — Length
0,01 mm to 10,00 mm · CMC 4,9 µm
Length
Internal procedure; using a digital micrometer; At permanent location (S) Internal procedure IW-10-LW-AK-04
60 90° try squares Calibration — Length
deviation measurement - flatness — arm length up to 500 mm · CMC 4,2 µm deviation measurement - straightness — arm length up to 500 mm · CMC 4,2 µm deviation measurement - parallelism — arm length up to 500 mm · CMC 4,2 µm deviation measurement - perpendicularity — arm length up to 500 mm · CMC 4,2 µm
Length
Internal procedure; using the O-Inspect coordinate measuring machine; At permanent location (S) Internal procedure IW-9-LW-AK-03
61 90° cylindrical squares Calibration — Length
deviation measurement - straightness — 0 mm to 400 mm · CMC 4,2 µm deviation measurement - perpendicularity — 0 mm to 400 mm · CMC 4,2 µm
Length
Internal procedure; using the O-Inspect coordinate measuring machine; At permanent location (S) Internal procedure IW-9-LW-AK-04
62 Dial bore gauges with an analogue indicator, scale interval: Calibration — Length
- 0,001 mm — 0 mm to 35 mm · CMC 3,7 µm - 0,001 mm — od 35 mm to 60 mm · CMC 3,8 µm - 0,001 mm — od 50 mm to 150 mm · CMC 4,3 µm - 0,001 mm — od 150 mm to 250 mm · CMC 5,2 µm - 0,001 mm — od 250 mm to 500 mm · CMC 7,9 µm - 0,002 mm — 0 mm to 35 mm · CMC 3,7 µm - 0,002 mm — od 35 mm to 60 mm · CMC 3,8 µm - 0,002 mm — od 50 mm to 150 mm · CMC 4,3 µm - 0,002 mm — od 150 mm to 250 mm · CMC 5,2 µm - 0,002 mm — od 250 mm to 500 mm · CMC 7,9 µm - 0,005 mm — 0 mm to 35 mm · CMC 3,8 µm - 0,005 mm — od 35 mm to 60 mm · CMC 3,8 µm - 0,005 mm — od 50 mm to 150 mm · CMC 4,4 µm - 0,005 mm — od 150 mm to 250 mm · CMC 5,2 µm - 0,005 mm — od 250 mm to 500 mm · CMC 7,9 µm - 0,01 mm — 0 mm to 35 mm · CMC 4,4 µm - 0,01 mm — od 35 mm to 60 mm · CMC 4,4 µm - 0,01 mm — od 50 mm to 150 mm · CMC 4,9 µm - 0,01 mm — od 150 mm to 250 mm · CMC 5,7 µm - 0,01 mm — od 250 mm to 500 mm · CMC 8,2 µm - 0,1 mm — 0 mm to 35 mm · CMC 10,8 µm - 0,1 mm — od 35 mm to 60 mm · CMC 10,9 µm - 0,1 mm — od 50 mm to 150 mm · CMC 11,0 µm - 0,1 mm — od 150 mm to 250 mm · CMC 11,4 µm - 0,1 mm — od 250 mm to 500 mm · CMC 12,9 µm
Length
Internal procedure; using gauge blocks; At permanent location (S) Internal procedure IW-10-LW-AK-05
63 Dial bore gauges with a digital indicator, resolution: Calibration — Length
- 0,001 mm — 0 mm to 35 mm · CMC 4,1 µm - 0,001 mm — od 35 mm to 60 mm · CMC 4,2 µm - 0,001 mm — od 50 mm to 150 mm · CMC 4,7 µm - 0,001 mm — od 150 mm to 250 mm · CMC 5,5 µm - 0,001 mm — od 250 mm to 500 mm · CMC 8,1 µm - 0,002 mm — 0 mm to 35 mm · CMC 4,2 µm - 0,002 mm — od 35 mm to 60 mm · CMC 4,3 µm - 0,002 mm — od 50 mm to 150 mm · CMC 4,8 µm - 0,002 mm — od 150 mm to 250 mm · CMC 5,6 µm - 0,002 mm — od 250 mm to 500 mm · CMC 8,2 µm - 0,005 mm — 0 mm to 35 mm · CMC 5,0 µm - 0,005 mm — od 35 mm to 60 mm · CMC 5,1 µm - 0,005 mm — od 50 mm to 150 mm · CMC 5,5 mm - 0,005 mm — od 150 mm to 250 mm · CMC 6,2 µm - 0,005 mm — od 250 mm to 500 mm · CMC 8,6 µm - 0,01 mm — 0 mm to 35 mm · CMC 7,2 µm - 0,01 mm — od 35 mm to 60 mm · CMC 7,2 µm - 0,01 mm — od 50 mm to 150 mm · CMC 7,5 µm - 0,01 mm — od 150 mm to 250 mm · CMC 8,0 µm - 0,01 mm — od 250 mm to 500 mm · CMC 10,0 µm - 0,02 mm — 0 mm to 35 mm · CMC 13,5 µm - 0,02 mm — od 35 mm to 60 mm · CMC 13,6 µm - 0,02 mm — od 50 mm to 150 mm · CMC 13,7 µm - 0,02 mm — od 150 mm to 250 mm · CMC 14,00 µm - 0,02 mm — od 250 mm to 500 mm · CMC 15,2 µm - 0,05 mm — 0 mm to 35 mm · CMC 32,7µm - 0,05 mm — od 35 mm to 60 mm · CMC 32,7 µm - 0,05 mm — od 50 mm to 150 mm · CMC 32,8 µm - 0,05 mm — od 150 mm to 250 mm · CMC 32,9 µm - 0,05 mm — od 250 mm to 500 mm · CMC 33,5 µm
Length
Internal procedure; using gauge blocks; At permanent location (S) Internal procedure IW-10-LW-AK-05
64 Rigid rules Calibration — Length
0 mm to 750 mm · CMC (40,2 + 12,1 · L) µm
Length
Internal procedure; using the O-Inspect coordinate measuring machine; At permanent location (S) Internal procedure IW-9-LW-AK-06
65 Semi-rigid rules Calibration — Length
0 mm to 750 mm · CMC (40,2 + 22,2 · L) µm
Length
Internal procedure; using the O-Inspect coordinate measuring machine; At permanent location (S) Internal procedure IW-9-LW-AK-06
66 Line scales of measuring magnifiers Calibration — Length
0 mm to 20 mm · CMC 3,6 µm
Length
Internal procedure; measurement using the O-Inspect coordinate measuring machine; At permanent location (S) Internal procedure IW-9-LW-AK-08
67 Taper feeler gauges Calibration — Length
0 mm to 50 mm · CMC 29,4 µm
Length
Internal procedure; using the O-Inspect coordinate measuring machine; At permanent location (S) Internal procedure IW-9-LW-AK-12
68 Taper hole gauges Calibration — Length
0 mm to 200 mm · CMC 20,0 µm
Length
Internal procedure; using the O-Inspect coordinate measuring machine; At permanent location (S) Internal procedure IW-9-LW-AK-11
69 Weld gauges Calibration — Length
- vernier type — 0 mm to 50 mm · CMC 16,7 µm - special — 0 mm to 60 mm · CMC 16,7 µm
Length
Internal procedure; using the O-Inspect coordinate measuring machine; At permanent location (S) Internal procedure IW-9-LW-AK-09 IW-9-LW-AK-10
70 Special gauges Calibration — Angle
0° to 360° · CMC 48’’
Angle
Internal procedure; using the O-Inspect coordinate measuring machine; At permanent location (S) Internal procedure IW-9-LW-AK-01
71 Analogue universal bevel protractors Calibration — Angle
4x90° · CMC 2,8’
Angle
Internal procedure; using angle gauge blocks; At permanent location (S) Internal procedure IW-11-LW-AK-03
72 Digital universal bevel protractors Calibration — Angle
0° to 360° · CMC 2,5’
Angle
Internal procedure; using angle gauge blocks; At permanent location (S) Internal procedure IW-11-LW-AK-03
73 Digital levels Calibration — Angle
4x90° · CMC 0,04°
Angle
Internal procedure; using angle gauge blocks; At permanent location (S) Internal procedure IW-11-LW-AK-04
74 Weld gauges (bevel angle measurement) Calibration — Angle
- vernier type — 60° to 90° · CMC 5’ 11’’ - special — up to 160° · CMC 5’ 11’’
Angle
Internal procedure; using the O-Inspect coordinate measuring machine; At permanent location (S) Internal procedure IW-9-LW-AK-09 IW-9-LW-AK-10
75 Special try squares Calibration — Angle
0° to 360° · CMC 48’’
Angle
Internal procedure; using the O-Inspect coordinate measuring machine; At permanent location (S) Internal procedure IW-9-LW-AK-05
76 Surface plates Calibration — Length (surface geometry)
- flatness deviation; length of the longer side — 250 mm · CMC 1,2 µm - flatness deviation; length of the longer side — 400 mm · CMC 1,7 µm - flatness deviation; length of the longer side — 500 mm · CMC 1,8 µm - flatness deviation; length of the longer side — 630 mm · CMC 2,8 µm - flatness deviation; length of the longer side — 800 mm · CMC 2,7 µm - flatness deviation; length of the longer side — 1000 mm · CMC 3,0 µm - flatness deviation; length of the longer side — 1200 mm · CMC 3,3 µm - flatness deviation; length of the longer side — 1600 mm · CMC 3,8 µm - flatness deviation; length of the longer side — 2000 mm · CMC 4,3 µm - flatness deviation; length of the longer side — 2500 mm · CMC 4,8 µm - flatness deviation; length of the longer side — 3000 mm · CMC 5,3 µm
Length (surface geometry)
Internal procedure; using Talyvel 6 differential levels; At permanent location (S) and outside of it (P) Internal procedure IW-4-LW-AK-01
77 Straight edges Calibration — Length (surface geometry)
0 mm to 750 mm · CMC 2,6 µm
Length (surface geometry)
Internal procedure; using the O-Inspect coordinate measuring machine; At permanent location (S) Internal procedure IW-9-LW-AK-07
78 Special gauges Calibration — Length (coordinate measurements)
- length — 0 mm to 600 mm · CMC 4,2 µm - width — 0 mm to 400 mm · CMC 4,2 µm - diameter — 0 mm to 250 mm · CMC 4,2 µm - form deviation — 0 mm to 1 mm · CMC 3,0 µm - location deviations — 0 mm to 600 mm · CMC 4,1 µm
Length (coordinate measurements)
Internal procedure; measurement using the O-Inspect coordinate measuring machine; At permanent location (S) Internal procedure IW-9-LW-AK-01

Reference standards (47)

ASTM E11-24
IW-1-LW-AK-01
IW-10-LW-AK-01
IW-10-LW-AK-02
IW-10-LW-AK-03
IW-10-LW-AK-04
IW-10-LW-AK-05
IW-11-LW-AK-01
IW-11-LW-AK-03
IW-11-LW-AK-04
IW-2-LW-AK-01
IW-2-LW-AK-02
IW-2-LW-AK-03
IW-2-LW-AK-04
IW-2-LW-AK-05
IW-2-LW-AK-06
IW-2-LW-AK-07
IW-3-LW-AK 01
IW-3-LW-AK-01
IW-3-LW-AK-02
IW-3-LW-AK-03
IW-3-LW-AK-04
IW-3-LW-AK-05
IW-4-LW-AK-01
IW-6-LW-AK 01
IW-8-LW-AK-01
IW-9-LW-AK-01
IW-9-LW-AK-02
IW-9-LW-AK-03
IW-9-LW-AK-04
IW-9-LW-AK-05
IW-9-LW-AK-06
IW-9-LW-AK-07
IW-9-LW-AK-08
IW-9-LW-AK-09
IW-9-LW-AK-10
IW-9-LW-AK-11
IW-9-LW-AK-12
PN-EN 933-3:2012
PN-EN ISO 13225-1:2020
PN-EN ISO 13385-1:2019
PN-EN ISO 13385:2020
PN-EN ISO 3611:2023
PN-EN ISO 3650:2000
PN-ISO 3310-1:2000
PN-ISO 3310-2:2000
PN-ISO 3310-3:2000

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20154