🇵🇱 Przedsiębiorstwo Robót Specjalnych "Torfbud" Dawid Szopa PL

PCA AP 149 • Chorzów, Poland • 9 calibration items

Metrology & calibration

Przedsiębiorstwo Robót Specjalnych "Torfbud" Dawid Szopa is a calibration laboratory accredited by PCA under number AP 149 (Chorzów, Poland). Its accreditation scope covers 9 calibration items in the following areas: Metrology & calibration. Calibrated items include: Force gauges, Non-automatic electronic weighing instruments, Non-automatic mechanical weighing instruments, 25 kg mass standards. Most frequently used calibration principles: Internal procedure; At permanent location (S), Internal procedure; At permanent location (S) and outside of it (P), Internal procedure; Outside of permanent location (P).

At a glance

  • Accreditation number: PCA AP 149
  • Calibration items in scope: 9
  • Types of calibrated items: 8
  • Calibration principles used: 3
  • City: Chorzów, Poland
  • Valid until: 30-01-2029
Accreditation number
AP 149
Accreditation body
PCA
Address
ul. 11 Listopada 8, 41-500 Chorzów
City
Chorzów, Poland
Division
Torfbud Calibration Laboratory
Valid until
30-01-2029

What this laboratory calibrates (8)

Calibration principles (3)

Certificate information

Issue date
24.01.2025
Issue no.
11
Certificate date
17.05.2023
Accreditation cycle
24.01.2025 — 30.01.2029
Approved by
Katarzyna Wiśniewska

Accreditation scope — calibration items (9)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 %. A value expressed as a percentage is the relative measurement uncertainty and refers to the percentage of the value of the measurand. In other cases, the CMC uncertainty is expressed in measurand units.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Electronic rotational viscometers Calibration — Viscosity
1 mPa·s to 2000 mPa·s · CMC 2% 2000 mPa·s to 150000 mPa·s · CMC 3%
Viscosity
Internal procedure; At permanent location (S) PT 1.B based on PN-EN ISO 2555:2018-07 DIN 53019-2:2001
2 Non-automatic electronic weighing instruments
Non-automatic mechanical weighing instruments
Calibration — Mass (weighing instruments)
up to 300 g · CMC 8 · 10⁻⁵ % 300 g do 20000 g · CMC 1,5 · 10⁻³ % 20 kg do 10000 kg · CMC 9 · 10⁻³ % 10000 kg do 60000 kg · CMC 8 · 10⁻² %
Mass (weighing instruments)
Internal procedure; At permanent location (S) and outside of it (P) PT 1 based on EURAMET cg-18 v.4.0
3 Mass standards and weights of accuracy class M₁ Calibration — Mass (weights and mass standards)
20 mg · CMC 0,10 mg 50 mg · CMC 0,13 mg 100 mg · CMC 0,16 mg 200 mg · CMC 0,20 mg 500 mg · CMC 0,26 mg 1 g · CMC 0,33 mg 2 g · CMC 0,40 mg 5 g · CMC 0,53 mg 10 g · CMC 0,66 mg 20 g · CMC 0,83 mg 50 g · CMC 1,00 mg 100 g · CMC 1,66 mg 10 kg · CMC 166 mg
Mass (weights and mass standards)
Internal procedure; At permanent location (S) PT 1.C based on OIML R 111-1:2004 Annex C
4 25 kg mass standards Calibration — Mass (weights and mass standards)
25 kg · CMC 400 mg
Mass (weights and mass standards)
Internal procedure; At permanent location (S) PT 1.C based on OIML R 111-1:2004 Annex C
5 Mass standards of accuracy class M₁ Calibration — Mass (weights and mass standards)
1000 kg · CMC 16 g
Mass (weights and mass standards)
Internal procedure; At permanent location (S) PT 1.C based on OIML R 111-1:2004 Annex C
6 Force gauges Calibration — Force
0,5 N to 20000 N · CMC 0,1 %
Force
Internal procedure; At permanent location (S) PT 1.A based on VDI/VDE 2624:2009-12 Part 2.1
7 Force gauges Calibration — Force
0,5 N to 100000 N · CMC 0,1 %
Force
Internal procedure; Outside of permanent location (P) PT 1.A based on VDI/VDE 2624:2009-12 Part 2.1
8 Torque meters Calibration — Torque
0,04 Nm to 500 Nm · CMC 0,2 %
Torque
Internal procedure; At permanent location (S) PT 1.E based on VDI/VDE 2646:2019-12
9 Non-automatic electronic weighing instruments
Non-automatic mechanical weighing instruments
Calibration — Mass (weighing instruments)
up to 300 g · CMC 8 · 10⁻⁵ % 300 g do 20000 g · CMC 1,5 · 10⁻³ % 20 kg do 10000 kg · CMC 9 · 10⁻³ % 10000 kg do 60000 kg · CMC 8 · 10⁻² %
Mass (weighing instruments)
Internal procedure; At permanent location (S) and outside of it (P) PT 1 based on EURAMET cg-18 v.4.0

Reference standards (11)

DIN 53019-2:2001
EURAMET cg-18 v.4.0
OIML R 111-1:2004 Załącznik C
PN-EN ISO 2555:2018-07
PT 1
PT 1.A
PT 1.B
PT 1.C
PT 1.E
VDI/VDE 2624:2009-12 Part 2.1
VDI/VDE 2646:2019-12

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20149