🇵🇱 SVANTEK Sp. z o.o. PL
Metrology & calibration
SVANTEK Sp. z o.o. is a calibration laboratory accredited by PCA under number AP 146 (Warszawa, Poland). Its accreditation scope covers 10 calibration items in the following areas: Metrology & calibration. Calibrated items include: Vibration calibrators, - acceleration, Human-response vibration meters, Machine vibration meters. Most frequently used calibration principles: Internal procedure; At permanent location (S), Internal procedure; Non-simultaneous comparison method; At permanen….
At a glance
- Accreditation number: PCA AP 146
- Calibration items in scope: 10
- Types of calibrated items: 10
- Calibration principles used: 2
- City: Warszawa, Poland
- Valid until: 04-12-2028
- Accreditation number
- AP 146
- Accreditation body
- PCA
- Address
- ul. Strzygłowska 81, 04-872 Warszawa
- City
- Warszawa, Poland
- Division
- Calibration Laboratory
- Valid until
- 04-12-2028
What this laboratory calibrates (10)
- Vibration calibrators — 2 calibration items
- - acceleration — 1 calibration item
- Human-response vibration meters — 1 calibration item
- Machine vibration meters — 1 calibration item
- Measurement microphones — 1 calibration item
- Octave-band and one-third-octave-band filters — 1 calibration item
- Personal sound exposure meters: — 1 calibration item
- Sound calibrators — 1 calibration item
- Sound level meters — 1 calibration item
- Vibration transducers — 1 calibration item
Calibration principles (2)
- Internal procedure; At permanent location (S) — 9 calibration items
- Internal procedure; Non-simultaneous comparison method; At permanent location (S) — 1 calibration item
Certificate information
- Issue date
- 06.11.2024
- Issue no.
- 11
- Certificate date
- 27.01.2020
- Accreditation cycle
- 06.11.2024 — 04.12.2028
- Approved by
- Tadeusz Matras
Accreditation scope — calibration items (10)
| No. | Calibrated quantity / subject of calibration | Nominal range / parameters / CMC | Calibration principle | Calibration procedure | |
|---|---|---|---|---|---|
| Calibration items | |||||
| 1 | Measurement microphones | Calibration — Sound pressure (airborne sound) - pressure sensitivity level — relative to 1 V/Pa; frequency: 250 Hz; frequency: 1 kHz; - 40 dB to - 25 dB · CMC 0,09 dB Sound pressure (airborne sound) |
Internal procedure; Non-simultaneous comparison method; At permanent location (S) | IN-05 based on PN-EN 61094-5:2016 | |
| 2 | Sound calibrators | Calibration — Sound pressure (airborne sound) - sound pressure level — relative to 20 µPa; frequency: 1 kHz; 90 dB to 120 dB · CMC 0,08 dB Sound pressure (airborne sound) |
Internal procedure; At permanent location (S) | IN-01 based on PN-EN 60942:2018 | |
| 3 | Sound level meters | Calibration — Sound pressure (airborne sound) - response of the sound level meter to the signal from a sound calibrator — relative to 20 μPa; 90 dB to 120 dB · CMC 0,2 dB - response of the sound level meter to electrical test signals — relative to 20 μPa; 20 Hz to 20 kHz; 0 dB to 140 dB · CMC 0,2 dB - free-field frequency response of the sound level meter — 20 Hz to 20 kHz; 125 Hz · CMC 0,3 dB - free-field frequency response of the sound level meter — 20 Hz to 20 kHz; 1 kHz · CMC 0,3 dB - free-field frequency response of the sound level meter — 20 Hz to 20 kHz; 4 kHz · CMC 0,3 dB - free-field frequency response of the sound level meter — 20 Hz to 20 kHz; 8 kHz · CMC 0,4 dB Sound pressure (airborne sound) |
Internal procedure; At permanent location (S) | IN-02 based on PN-EN 61672-3:2007, PN-EN 61672-3:2014 | |
| 4 | Octave-band and one-third-octave-band filters | Calibration — Sound pressure (airborne sound) - relative attenuation — 20 Hz to 20 kHz; 0 dB to 100 dB; ≤ 70 dB · CMC 0,2 dB - relative attenuation — 20 Hz to 20 kHz; 0 dB to 100 dB; > 70 dB · CMC 0,3 dB Sound pressure (airborne sound) |
Internal procedure; At permanent location (S) | IN-04 based on PN-EN 61260:2000, PN-EN 61260:2016 | |
| 5 | Personal sound exposure meters: | Calibration — Sound pressure (airborne sound) - response of the sound exposure meter to the signal from a sound calibrator — time 60 s to 120 s; 90 dB to 120 dB · CMC 4,0 % - response of the sound exposure meter to electrical test signals — time 60 s to 120 s; 0,3 Pa²h to 105 Pa²h · CMC 3,0 % - free-field frequency response of the sound exposure meter — time 60 s to 120 s; relative to 20 μPa; 63 Hz to 4 kHz · CMC 0,4 dB - free-field frequency response of the sound exposure meter — time 60 s to 120 s; relative to 20 μPa; 4 kHz to 8 kHz · CMC 0,6 dB Sound pressure (airborne sound) |
Internal procedure; At permanent location (S) | IN-03 based on PN-EN 61252:2000 | |
| 6 | Vibration transducers | Calibration — Acceleration of mechanical vibration
Sensitivity of vibration transducers - reference sensitivity — 16 Hz and 80 Hz; 0,1 pC·m⁻¹·s² to 1000 pC·m⁻¹·s² · CMC 1,8 % - reference sensitivity — 16 Hz and 80 Hz; 0,1 mV·m⁻¹·s² to 1000 mV·m⁻¹·s² · CMC 1,8 % - frequency response — 0,5 Hz to 2 kHz; 0,5 Hz to 0,8 Hz · CMC 2,3 % - frequency response — 0,5 Hz to 2 kHz; 1 Hz to 16 Hz · CMC 2,1 % - frequency response — 0,5 Hz to 2 kHz; 20 Hz to 500 Hz · CMC 1,8 % - frequency response — 0,5 Hz to 2 kHz; 630 Hz to 2000 Hz · CMC 2,1 % Acceleration of mechanical vibration
Sensitivity of vibration transducers |
Internal procedure; At permanent location (S) | IN-07 based on ISO 16063-21:2003 | |
| 7 | Human-response vibration meters | Calibration — Acceleration of mechanical vibration
Sensitivity of vibration transducers - response of the meter to the reference signal — 15,915 Hz; 1 m·s⁻² · CMC 1,8% - response of the meter to the reference signal — 79,58 Hz; 10 m·s⁻² for · CMC 1,8% - frequency responses of the meter for a mechanical signal for filters Wₖ, W_D, Wₕ — 0,63 Hz · CMC 3,3 % - frequency responses of the meter for a mechanical signal for filters Wₖ, W_D, Wₕ — 0,8 Hz to 1 Hz · CMC 2,9 % - frequency responses of the meter for a mechanical signal for filters Wₖ, W_D, Wₕ — 1,25 Hz to 125 Hz · CMC 2,5 % - frequency responses of the meter for a mechanical signal for filters Wₖ, W_D, Wₕ — 5 Hz to 20 Hz · CMC 2,3 % - frequency responses of the meter for a mechanical signal for filters Wₖ, W_D, Wₕ — 25 Hz to 500 Hz · CMC 2,1 % - frequency responses of the meter for a mechanical signal for filters Wₖ, W_D, Wₕ — 630 Hz to 1000 Hz · CMC 2,3 % - determination of the linearity errors of the meter for a mechanical signal — 15,915 Hz; 0,1 m·s⁻² to 25 m·s⁻² · CMC 1,8 % - determination of the linearity errors of the meter for a mechanical signal — 79,58 Hz; 5 m·s⁻² to 100 m·s⁻² for · CMC 1,8 % Acceleration of mechanical vibration
Sensitivity of vibration transducers |
Internal procedure; At permanent location (S) | IN-08 based on PN-EN ISO 8041-1:2017 | |
| 8 | Vibration calibrators | Calibration — Acceleration of mechanical vibration
Sensitivity of vibration transducers 16 Hz: 1 m·s⁻² · CMC 1,5 % 80 Hz: 10 m·s⁻² · CMC 1,5 % 160 Hz: 10 m·s⁻² · CMC 1,5 % 630 Hz: 1 m·s⁻² · CMC 1,5 % Acceleration of mechanical vibration
Sensitivity of vibration transducers |
Internal procedure; At permanent location (S) | IN-06 based on PN-EN ISO 8041-1:2017 | |
| 9 | Vibration calibrators - acceleration |
Calibration — Acceleration of mechanical vibration
Sensitivity of vibration transducers 16 Hz: 1 m·s⁻² · CMC 1,5 % 80 Hz: 10 m·s⁻² · CMC 1,5 % 160 Hz: 10 m·s⁻² · CMC 1,5 % 630 Hz: 1 m·s⁻² · CMC 1,5 % Acceleration of mechanical vibration
Sensitivity of vibration transducers |
Internal procedure; At permanent location (S) | IN-06 based on PN-EN ISO 8041-1:2017 | |
| 10 | Machine vibration meters | Calibration — Acceleration of mechanical vibration
Sensitivity of vibration transducers - response of the meter to the reference signal for a mechanical signal — 80 Hz; 10 m·s⁻² · CMC 1,8 % - frequency responses of the meter for a mechanical signal — 8 Hz to 20 Hz · CMC 2,3 % - frequency responses of the meter for a mechanical signal — 25 Hz to 500 Hz · CMC 2,1 % - frequency responses of the meter for a mechanical signal — 630 Hz to 1600 Hz · CMC 2,3 % - frequency responses of the meter for a mechanical signal — 2000 Hz · CMC 2,4 % Acceleration of mechanical vibration
Sensitivity of vibration transducers |
Internal procedure; At permanent location (S) | IN-10 | |
Reference standards (18)
IN-01
IN-02
IN-03
IN-04
IN-05
IN-06
IN-07
IN-08
IN-10
ISO 16063-21:2003
PN-EN 60942:2018
PN-EN 61094-5:2016
PN-EN 61252:2000
PN-EN 61260:2000
PN-EN 61260:2016
PN-EN 61672-3:2007
PN-EN 61672-3:2014
PN-EN ISO 8041-1:2017