🇵🇱 Urząd Dozoru Technicznego PL

PCA AP 136 • Poznań, Poland • 28 calibration items

Metrology & calibration

Urząd Dozoru Technicznego is a calibration laboratory accredited by PCA under number AP 136 (Poznań, Poland). Its accreditation scope covers 28 calibration items in the following areas: Metrology & calibration. Calibrated items include: Digital tachometers, Technological devices, Universal Testing Machines, Digital displacement sensors / transducers. Most frequently used calibration principles: Internal procedure; Direct method; At permanent location (S), At permanent location (S) and outside of it (P), Internal procedure; Direct method; At permanent location (S) and ou….

At a glance

  • Accreditation number: PCA AP 136
  • Calibration items in scope: 28
  • Types of calibrated items: 30
  • Calibration principles used: 9
  • City: Poznań, Poland
  • Valid until: 23-06-2030
Accreditation number
AP 136
Accreditation body
PCA
Address
ul. Ostrowska 388, 61-312 Poznań
City
Poznań, Poland
Division
Department of Metrology and Management WBP
Valid until
23-06-2030

What this laboratory calibrates (30)

Calibration principles (9)

Certificate information

Issue date
16.06.2026
Issue no.
18
Accreditation cycle
16.06.2026 — 23.06.2030
Approved by
Katarzyna Wiśniewska

Accreditation scope — calibration items (28)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 %. The uncertainty covered by the CMC is expressed in measurand units.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Digital tachometers Calibration — Speed
10,00 rpm to 99,99 rpm · CMC 0,1 rpm 100,0 rpm to 999,9 rpm · CMC 0,2 rpm 1000 rpm to 33000 rpm · CMC 2 rpm 33001 rpm to 50000 rpm · CMC 3 rpm
Speed
Internal procedure; Direct method Optical method; At permanent location (S) LW-1/IN/203
2 Digital tachometers Calibration — Speed
10,00 rpm to 99,99 rpm · CMC 0,1 rpm 100,0 rpm to 999,9 rpm · CMC 0,2 rpm 100 0 rpm to 20000 rpm · CMC 2 rpm
Speed
Internal procedure; Direct method Contact method; At permanent location (S) LW-1/IN/203
3 Digital tachometers Calibration — Speed
0,89 mpm to 5,00 mpm · CMC 0,02 mpm 5,01 mpm to 300,0 mpm · CMC 0,3 %
Speed
Internal procedure; Direct method; At permanent location (S) LW-1/IN/203
4 Digital displacement sensors / transducers Calibration — Length
0 mm to 150 mm · CMC 0,06 mm
Length
Internal procedure; Direct method using a gauge blocks; At permanent location (S) LW-1/IN/202
5 Digital displacement sensors / transducers Calibration — Length
0 mm to 3,5 mm · CMC 0,005 mm 3,5 mm to 500 mm · CMC 0,15 %
Length
Internal procedure; Direct method using an interferometer; At permanent location (S) LW-1/IN/202
6 Laser distance meters Calibration — Length
0 m to 5 m · CMC 1,0 mm 5,001 m do 30 m · CMC 2,5 mm 30,0001 m do 50 m · CMC 2,8 mm
Length
Internal procedure; Direct method; At permanent location (S) LW-1/IN/205
7 Caliper depth gauges Calibration — Length
0 mm to 150 mm · CMC 0,06 mm
Length
Internal procedure; Direct method; At permanent location (S) LW-1/IN/202
8 Ultrasonic thickness gauges Calibration — Length
0 mm to 2 mm · CMC 0,01 mm 2 mm to 6 mm · CMC 0,02 mm 6 mm to 100 mm · CMC 0,3 %
Length
At permanent location (S) PN-EN ISO 16831:2025-11 Group 2 tests cl. 9.3, 9.13
9 Internal / External measuring gauge Calibration — Length
0 mm to 50 mm · CMC 0,005 mm 50 mm do 100 mm · CMC 0,008 mm
Length
Internal procedure; Direct method; At permanent location (S) LW-1/IN/202
10 Coating thickness gauges Calibration — Length
0 mm to 0,5 mm · CMC 0,003 mm 0,5 mm to 3 mm · CMC 0,7 %
Length
Internal procedure; Direct method; At permanent location (S) LW-1/IN/210
11 Tape measures Calibration — Length
0 m to 60 m · CMC 0,2 mm + 0,2 · (n – 1) mm
Length
Internal procedure; Direct method; At permanent location (S) LW-1/IN/205
12 Semi-rigid rules
Circometer (diameter tapes)
Calibration — Length
0 m to 5 m · CMC 0,2 mm
Length
Internal procedure; Direct method; At permanent location (S) LW-1/IN/205
13 Weld gauges Calibration — Length
0 mm to 35 mm · CMC 0,06 mm
Length
Internal procedure; Direct method; At permanent location (S) LW-1/IN/202
14 Calipers Calibration — Length
0 mm to 500 mm · CMC 0,06 mm
Length
Internal procedure; Direct method; At permanent location (S) LW-1/IN/202
15 Feeler gauges Calibration — Length
0,05 mm to 2 mm · CMC 0,007 mm
Length
Internal procedure; Direct method; At permanent location (S) LW-1/IN/209
16 Step wedges (calibration blocks) for ultrasonic thickness gauges Calibration — Length
0,5 mm to 25 mm · CMC 0,007 mm
Length
Internal procedure; Direct method; At permanent location (S) LW-1/IN/209
17 Extensometers Calibration — Force
0 mm to 0,35 mm · CMC 0,5 µm 0,35 to 2500 mm · CMC 0,15 %
Force
At permanent location (S) and outside of it (P) PN-EN ISO 9513:2013-06 ASTM E83-25
18 Universal Testing Machines
Technological devices
- for tensile forces
- for compressive forces
Calibration — Force
0,5 N to 250 kN · CMC 0,13 %
Force
At permanent location (S) and outside of it (P) PN-EN ISO 7500-1:2018-05 ASTM E4-24
19 Universal Testing Machines
Technological devices
- Crosshead Displacement or Actuator Stroke
Calibration — Force
0 mm to 0,35 mm · CMC 0,5 µm 0,35 mm to 5000 mm · CMC 0,15 %
Force
At permanent location (S) and outside of it (P) PN-EN ISO 9513:2013-06 Annex H ASTM E2309/E2309M-2
20 Universal Testing Machines
Technological devices
- Crosshead /Actuator Speed
Calibration — Force
0 mm/min to 0,5 mm/min · CMC 1 µm/min 0,5 mm/min to 3000 mm/min · CMC 0,2 %
Force
At permanent location (S) and outside of it (P) ASTM E2658-15
21 Force gauges Calibration — Force
0,5 N to 250 kN · CMC 0,13 %
Force
Internal procedure; Direct method; At permanent location (S) and outside of it (P) LW-1/IN/212 based on PN-EN ISO 7500-1:2018-05
22 Portable hardness testers Calibration — Hardness
HV5 · CMC 3 % HV10 · CMC 3 %
Hardness
Internal procedure; At permanent location (S) LW-1/IN/213 based on DIN 50159-2:2022-06 PN-EN ISO 6507-2:2018-05
23 UV-A irradiance meters for non-destructive testing (NDT) Calibration — Radiometric quantities
0,1 mW/cm² to 5 mW/cm² · CMC 12 %
Radiometric quantities
Internal procedure; Direct method; At permanent location (S) LW-1/IN/207 based on CIE 220:2016
24 Lux meters (illuminance meters)
for non-destructive testing (NDT)
Calibration — Illuminance
20 lx to 5000 lx · CMC 3,5 %
Illuminance
Internal procedure; Direct method; At permanent location (S) LW-1/IN/207
25 Mechanical manometers
Digital manometers
Calibration — Pressure
gauge pressure (gas medium) — -0,095 MPa to 0 MPa · CMC 0,00005 MPa gauge pressure (gas medium) — 0 MPa to 0,1 MPa · CMC 0,00003 MPa gauge pressure (gas medium) — 0,1 MPa to 3,5 MPa · CMC 4,1 · 10⁻⁴ · p gauge pressure (liquid medium) — 0,1 MPa to 1,4 MPa · CMC 6,2 · 10⁻⁴ MPa gauge pressure (liquid medium) — 1,4 MPa to 12 MPa · CMC 4,1 · 10⁻⁴ · p gauge pressure (liquid medium) — 12 MPa to 40 MPa · CMC 2,1 · 10⁻⁴ · p gauge pressure (liquid medium) — 40 MPa to 100 MPa · CMC 3,5 · 10⁻⁴ · p
Pressure
Internal procedure; Direct method; At permanent location (S) LW-1/IN/201 based on EURAMET Calibration Guide No. 17 Version 4.1 (09/2022)
26 Electric thermometers Calibration — Temperature (electrical thermometry)
-20 °C to 110 °C · CMC 0,18 °C
Temperature (electrical thermometry)
Internal procedure; Direct method; At permanent location (S) and outside of it (P) LW-1/IN/206 based on DKD-R 5-1 (11/2023)
27 Electric thermometers Calibration — Temperature (electrical thermometry)
110 °C to 200 °C · CMC 0,40 °C 200 °C to 550 °C · CMC 0,65 °C
Temperature (electrical thermometry)
Internal procedure; Direct method; At permanent location (S) LW-1/IN/206 based on DKD-R 5-1 (11/2023)
28 Pyrometers Calibration — Temperature (radiation thermometry)
-23 °C do 100 °C · CMC 0,9 °C 100 °C to 200 °C · CMC 1,5 °C 200 °C do 300 °C · CMC 1,8 °C 300 °C do 400 °C · CMC 2,1 °C 400 °C do 500 °C · CMC 2,3 °C 500 °C do 550 °C · CMC 2,6 °C
Temperature (radiation thermometry)
Internal procedure; Direct method; At permanent location (S) LW-1/IN/206 based on MSL Technical Guide 22 (06.2009)

Reference standards (24)

ASTM E2309/E2309M-2
ASTM E2658-15
ASTM E4-24
ASTM E83-25
CIE 220:2016
DIN 50159-2:2022-06
DKD-R 5-1 (11/2023)
EURAMET Calibration Guide No. 17 Version 4.1 (09/2022)
LW-1/IN/201
LW-1/IN/202
LW-1/IN/203
LW-1/IN/205
LW-1/IN/206
LW-1/IN/207
LW-1/IN/209
LW-1/IN/210
LW-1/IN/212
LW-1/IN/213
MSL Technical Guide 22 (06.2009)
PN-EN ISO 16831:2025-11
PN-EN ISO 6507-2:2018-05
PN-EN ISO 7500-1:2018-05
PN-EN ISO 9513:2013-06
PN-EN ISO 9513:2013-06 Annex H

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20136