🇵🇱 EMIO Przedsiębiorstwo Innowacyjno-Wdrożeniowe Sp. z o.o. PL

PCA AP 128 • Wrocław, Poland • 9 calibration items

Metrology & calibration

EMIO Przedsiębiorstwo Innowacyjno-Wdrożeniowe Sp. z o.o. is a calibration laboratory accredited by PCA under number AP 128 (Wrocław, Poland). Its accreditation scope covers 9 calibration items in the following areas: Metrology & calibration. Calibrated items include: Flow measuring systems in devices manufactured by EMIO, Temperature measuring systems in devices manufactured by EMIO, Aspirators, Dust meters. Most frequently used calibration principles: Internal procedure; Direct method; At permanent location (S), Internal procedure; Indirect method; At permanent location (S).

At a glance

  • Accreditation number: PCA AP 128
  • Calibration items in scope: 9
  • Types of calibrated items: 10
  • Calibration principles used: 2
  • City: Wrocław, Poland
  • Valid until: 21-12-2029
Accreditation number
AP 128
Accreditation body
PCA
Address
ul. Chorwacka 39a, 51-107 Wrocław
City
Wrocław, Poland
Division
Calibration Laboratory
Valid until
21-12-2029

What this laboratory calibrates (10)

Calibration principles (2)

Certificate information

Issue date
03.12.2025
Issue no.
14
Certificate date
04.12.2019
Accreditation cycle
03.12.2025 — 21.12.2029
Approved by
Katarzyna Wiśniewska

Accreditation scope — calibration items (9)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units. A CMC uncertainty value expressed as a percentage is the relative measurement uncertainty and refers to the percentage of the value of the measurand.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Electronic stopwatches
Time measuring systems in devices manufactured by EMIO
Calibration — Time (time interval)
5 s to 3600 s · CMC 0,08 s + 4 · 10⁻⁵ · τ τ – time interval in s
Time (time interval)
Internal procedure; Indirect method; At permanent location (S) PTW.6-PS 5.4, IW.1-PTW 6
2 Aspirators
Flow measuring systems in devices manufactured by EMIO
Calibration — Volume flow rate (flow gases)
0,50 dm³/min to 2,50 dm³/min · CMC 0,04 dm³/min 2,50 dm³/min to 4,17 dm³/min · CMC 0,06 dm³/min
Volume flow rate (flow gases)
Internal procedure; Direct method; At permanent location (S) IW.1-PTW 4, IW.2-PTW 4
3 Dust meters
Flow measuring systems in devices manufactured by EMIO
Calibration — Volume flow rate (flow gases)
1 m³/h to 11 m³/h · CMC 1 %
Volume flow rate (flow gases)
Internal procedure; Direct method; At permanent location (S) PTW.4-PS 5.4
4 Vane anemometers Calibration — Air velocity (flow gases)
1,0 m/s to 2,0 m/s · CMC 0,4 m/s 2,1 m/s to 3,0 m/s · CMC 0,7 m/s 3,1 m/s to 4,0 m/s · CMC 0,8 m/s 4,1 m/s to 5,0 m/s · CMC 0,9 m/s 5,1 m/s to 6,0 m/s · CMC 1,0 m/s
Air velocity (flow gases)
Internal procedure; Direct method; At permanent location (S) PTW.5-PS 5.4, IW.1-PTW 5, IW.2-PTW 5
5 Pitot tubes (constant „K”) Calibration — Air velocity (flow gases)
5,0 m/s1) to 7,0 m/s1) · CMC 21 %2) 7,1 m/s1) to 9,0 m/s1) · CMC 10 %2) 9,1 m/s1) to 11,0 m/s1) · CMC 6 %2) 11,1 m/s1) to 13,0 m/s1) · CMC 4 %2) 13,1 m/s1) to 15,0 m/s1) · CMC 3 %2) 15,1 m/s1) to 17,0 m/s1) · CMC 2 %2) 17,1 m/s1) to 19,0 m/s1) · CMC 2 %2) 19,1 m/s1) to 21,0 m/s1) · CMC 1 %2)
Air velocity (flow gases)
Internal procedure; Indirect method; At permanent location (S) PTW.S-PS 5.4
6 Humidity measuring systems in devices manufactured by EMIO Calibration — Relative humidity
at a temperature of 23°C — 10 %rh to 80 %rh · CMC 3,0 %rh
Relative humidity
Internal procedure; Direct method; At permanent location (S) PTW.3-PS 5.4, IW.1-PTW 3
7 Pressure measuring systems in devices manufactured by EMIO Calibration — Pressure
Absolute pressure — 700 hPa to 1034 hPa · CMC 0,3 hPa Gauge pressure — -450 hPa to 5 hPa · CMC 0,6 hPa Differential pressure — 0 Pa to 2200 Pa · CMC 1,0 Pa
Pressure
Internal procedure; Direct method; At permanent location (S) PTW.2-PS 5.4, IW.1-PTW 2
8 Temperature measuring systems in devices manufactured by EMIO Calibration — Temperature (electrical thermometry)
Station SW.01k temperature calibrator — 0 °C to 85 °C · CMC 0,3 °C
Temperature (electrical thermometry)
Internal procedure; Direct method; At permanent location (S) PTW.1-PS 5.4
9 Temperature measuring systems in devices manufactured by EMIO Calibration — Temperature (electrical thermometry)
Station SW.02u ultrathermostat — 50 °C to 160 °C · CMC 0,7 °C Station SW 03 temperature calibrator — 100 °C to 550 °C · CMC 1,7 °C Station SW 04 temperature calibrator — 0 °C to 60 °C · CMC 2,0 °C
Temperature (electrical thermometry)
Internal procedure; Direct method; At permanent location (S) IW.1-PTW 1

Reference standards (15)

IW.1-PTW 1
IW.1-PTW 2
IW.1-PTW 3
IW.1-PTW 4
IW.1-PTW 5
IW.1-PTW 6
IW.2-PTW 4
IW.2-PTW 5
PTW.1-PS 5.4
PTW.2-PS 5.4
PTW.3-PS 5.4
PTW.4-PS 5.4
PTW.5-PS 5.4
PTW.6-PS 5.4
PTW.S-PS 5.4

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20128