🇵🇱 RADWAG Wagi Elektroniczne Witold Lewandowski PL

PCA AP 069 • Radom, Poland • 13 calibration items

Metrology & calibration

RADWAG Wagi Elektroniczne Witold Lewandowski is a calibration laboratory accredited by PCA under number AP 069 (Radom, Poland). Its accreditation scope covers 13 calibration items in the following areas: Metrology & calibration. Calibrated items include: 25 kg mass standards, Automatic catchweighing instruments, Load weights, Mass standards. Most frequently used calibration principles: Internal procedure; At permanent location (S), Internal procedure; At permanent location (S) and outside of it (P), Internal procedure; Outside of permanent location (P).

At a glance

  • Accreditation number: PCA AP 069
  • Calibration items in scope: 13
  • Types of calibrated items: 22
  • Calibration principles used: 3
  • City: Radom, Poland
  • Valid until: 04-11-2028
Accreditation number
AP 069
Accreditation body
PCA
Address
ul. Starowiejska 17a, 26-600 Radom
City
Radom, Poland
Division
Centre for Metrology, Testing and Certification - Measurement Laboratory
Valid until
04-11-2028

What this laboratory calibrates (22)

Calibration principles (3)

Certificate information

Issue date
30.10.2024
Issue no.
21
Certificate date
04.01.2021
Accreditation cycle
30.10.2024 — 04.11.2028
Approved by
Tadeusz Matras

Accreditation scope — calibration items (13)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Non-automatic electronic weighing instruments Calibration — Mass (weighing instruments)
up to 150 kg · CMC 0,7∙D 150 kg to 3000 kg · CMC 1,0∙D
Mass (weighing instruments)
Internal procedure; At permanent location (S) and outside of it (P) Internal procedure PW 01, PW 01A based on EURAMET cg-18 v.4.0
2 Automatic catchweighing instruments Calibration — Mass (weighing instruments)
up to 60 kg · CMC 0,16 g
Mass (weighing instruments)
Internal procedure; Outside of permanent location (P) Internal procedure PW 04 based on OIML R-51-1:2006
3 Mass standards of accuracy class E1
Weights of accuracy class E1
Calibration — Mass (weights and mass standards)
1 mg · CMC 0,0010 mg 2 mg · CMC 0,0010 mg 5 mg · CMC 0,0010 mg 10 mg · CMC 0,0010 mg 20 mg · CMC 0,0010 mg 50 mg · CMC 0,0013 mg 100 mg · CMC 0,0017 mg 200 mg · CMC 0,0020 mg 500 mg · CMC 0,0026 mg
Mass (weights and mass standards)
Internal procedure; At permanent location (S) Internal procedure PW 03 based on OIML R-111-1:2004 Annex C
4 Mass standards of accuracy class E2
Weights of accuracy class E2
Calibration — Mass (weights and mass standards)
1 mg · CMC 0,0015 mg 2 mg · CMC 0,0015 mg 5 mg · CMC 0,0015 mg 10 mg · CMC 0,0020 mg 20 mg · CMC 0,0020 mg 50 mg · CMC 0,0025 mg 100 mg · CMC 0,0030 mg 200 mg · CMC 0,0040 mg 500 mg · CMC 0,0050 mg 1g · CMC 0,0060 mg 2g · CMC 0,0080 mg 5g · CMC 0,0100 mg 10 g · CMC 0,012 mg 20 g · CMC 0,016 mg 50 g · CMC 0,020 mg 100 g · CMC 0,032 mg 200 g · CMC 0,060 mg 500 g · CMC 0,160 mg 1 kg · CMC 0,300 mg 2 kg · CMC 0,60 mg
Mass (weights and mass standards)
Internal procedure; At permanent location (S) Internal procedure PW 03 based on OIML R-111-1:2004 Annex C
5 Mass standards of accuracy class F1
Weights of accuracy class F1
Calibration — Mass (weights and mass standards)
1 mg · CMC 0,006 mg 2 mg · CMC 0,006 mg 5 mg · CMC 0,006 mg 10 mg · CMC 0,008 mg 20 mg · CMC 0,010 mg 50 mg · CMC 0,013 mg 100 mg · CMC 0,016 mg 200 mg · CMC 0,020 mg 500 mg · CMC 0,026 mg 1g · CMC 0,030 mg 2g · CMC 0,040 mg 5g · CMC 0,050 mg 10 g · CMC 0,060 mg 20 g · CMC 0,080 mg 50 g · CMC 0,10 mg 100 g · CMC 0,16 mg 200 g · CMC 0,33 mg 500 g · CMC 0,80 mg 1 kg · CMC 1,60 mg 2 kg · CMC 3,30 mg 5 kg · CMC 8,00 mg 10 kg · CMC 16,0 mg 20 kg · CMC 30,0 mg
Mass (weights and mass standards)
Internal procedure; At permanent location (S) Internal procedure PW 03 based on OIML R-111-1:2004 Annex C
6 Mass standards of accuracy class F2
Weights of accuracy class F2
Calibration — Mass (weights and mass standards)
1 mg · CMC 0,020 mg 2 mg · CMC 0,020 mg 5 mg · CMC 0,020 mg 10 mg · CMC 0,020 mg 20 mg · CMC 0,030 mg 50 mg · CMC 0,040 mg 100 mg · CMC 0,050 mg 200 mg · CMC 0,060 mg 500 mg · CMC 0,080 mg 1g · CMC 0,100 mg 2g · CMC 0,130 mg 5g · CMC 0,160 mg 10 g · CMC 0,200 mg 20 g · CMC 0,260 mg 50 g · CMC 0,30 mg 100 g · CMC 0,50 mg 200 g · CMC 1,00 mg 500 g · CMC 2,5 mg 1 kg · CMC 5,0 mg 2 kg · CMC 10,0 mg 5 kg · CMC 25,0 mg 10 kg · CMC 50,0 mg 20 kg · CMC 100,0 mg 50 kg · CMC 0,25 g
Mass (weights and mass standards)
Internal procedure; At permanent location (S) Internal procedure PW 03 based on OIML R-111-1:2004 Annex C
7 Mass standards of accuracy class M1
Weights of accuracy class M1
Calibration — Mass (weights and mass standards)
1 mg · CMC 0,060 mg 2 mg · CMC 0,060 mg 5 mg · CMC 0,060 mg 10 mg · CMC 0,080 mg 20 mg · CMC 0,100 mg 50 mg · CMC 0,130 mg 100 mg · CMC 0,160 mg 200 mg · CMC 0,200 mg 500 mg · CMC 0,260 mg 1g · CMC 0,330 mg 2g · CMC 0,400 mg 5g · CMC 0,500 mg 10 g · CMC 0,600 mg 20 g · CMC 0,800 mg 50 g · CMC 1,00 mg 100 g · CMC 1,60 mg 200 g · CMC 3,00 mg 500 g · CMC 8,0 mg 1 kg · CMC 16,0 mg 2 kg · CMC 33,0 mg 5 kg · CMC 83,0 mg 10 kg · CMC 160,0 mg 20 kg · CMC 330,0 mg 50 kg · CMC 0,8 g 100 kg · CMC 1,6 g 200 kg · CMC 3g 500 kg · CMC 8g 1000 kg · CMC 16 g
Mass (weights and mass standards)
Internal procedure; At permanent location (S) Internal procedure PW 03 based on OIML R-111-1:2004 Annex C
8 Mass standards of accuracy class M2
Weights of accuracy class M2
Calibration — Mass (weights and mass standards)
100 mg · CMC 0,500 mg 200 mg · CMC 0,600 mg 500 mg · CMC 0,800 mg 1g · CMC 1,000 mg 2g · CMC 1,300 mg 5g · CMC 1,600 mg 10 g · CMC 2,000 mg 20 g · CMC 2,500 mg 50 g · CMC 3,00 mg 100 g · CMC 5,00 mg 200 g · CMC 10,00 mg 500 g · CMC 26,0 mg 1 kg · CMC 50,0 mg 2 kg · CMC 100,0 mg 5 kg · CMC 260,0 mg 10 kg · CMC 530,0 mg 20 kg · CMC 1000,0 mg 50 kg · CMC 2,00 g 100 kg · CMC 5g 200 kg · CMC 10 g 500 kg · CMC 26 g 1000 kg · CMC 53 g
Mass (weights and mass standards)
Internal procedure; At permanent location (S) Internal procedure PW 03 based on OIML R-111-1:2004 Annex C
9 Mass standards of accuracy class M3
Weights of accuracy class M3
Calibration — Mass (weights and mass standards)
1g · CMC 3,000 mg 2g · CMC 4,000 mg 5g · CMC 5,000 mg 10 g · CMC 6,000 mg 20 g · CMC 8,000 mg 50 g · CMC 10,00 mg 100 g · CMC 16,00 mg 200 g · CMC 33,00 mg 500 g · CMC 80,0 mg 1 kg · CMC 166,0 mg 2 kg · CMC 330,0 mg 5 kg · CMC 830,0 mg 10 kg · CMC 1600,0 mg 20 kg · CMC 3300,0 mg 50 kg · CMC 8,00 g 100 kg · CMC 16 g 200 kg · CMC 33 g 500 kg · CMC 80 g 1000 kg · CMC 160 g
Mass (weights and mass standards)
Internal procedure; At permanent location (S) Internal procedure PW 03 based on OIML R-111-1:2004 Annex C
10 25 kg mass standards Calibration — Mass (weights and mass standards)
25 kg · CMC 0,40 g
Mass (weights and mass standards)
Internal procedure; At permanent location (S) Internal procedure PW 03 based on OIML R-111-1:2004 Annex C
11 Mass standards
Weights
Calibration — Mass (weights and mass standards)
25 kg · CMC 126 mg
Mass (weights and mass standards)
Internal procedure; At permanent location (S) Internal procedure PW 03 based on OIML R-111-1:2004 Annex C
12 Load weights Calibration — Mass (weights and mass standards)
1 mg to 500 mg · CMC 0,010 mg 500 mg to 200 g · CMC 0,05 mg 200 g to 1 kg · CMC 3 mg 1 kg to 2 kg · CMC 4 mg 2 kg to 5 kg · CMC 8 mg 5 kg to 10 kg · CMC 17 mg 10 kg to 20 kg · CMC 30 mg 20 kg to 50 kg · CMC 80 mg 50 kg to 100 kg · CMC 2g
Mass (weights and mass standards)
Internal procedure; At permanent location (S) Internal procedure PP 01 based on OIML R-111-1:2004 Annex C
13 Single-channel piston pipettes
Multi-channel piston pipettes
Calibration — Volume
up to 1 µl · CMC 0,050 µl 1 µl to 2 µl · CMC 0,050 µl 2 µl to 5 µl · CMC 0,050 µl 5 µl to 10 µl · CMC 0,050 µl 10 µl to 20 µl · CMC 0,07 µl 20 µl to 50 µl · CMC 0,17 µl 50 µl to 100 µl · CMC 0,27 µl 100 µl to 300 µl · CMC 0,53 µl 300 µl to 500 µl · CMC 1,3 µl 500 µl to 1000 µl · CMC 2,6 µl 1000 µl to 2500 µl · CMC 8,0 µl 2500 µl to 5000 µl · CMC 13 µl 5000 µl to 10000 µl · CMC 20 µl
Volume
Internal procedure; At permanent location (S) Internal procedure PW 05 based on PN-EN ISO 8655-6:2022-11

Reference standards (10)

EURAMET cg-18 v.4.0
OIML R-111-1:2004 Załącznik C
OIML R-51-1:2006
PN-EN ISO 8655-6:2022-11
PP 01
PW 01
PW 01A
PW 03
PW 04
PW 05

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20069