🇵🇱 Centralny Instytut Ochrony Pracy - Państwowy Instytut Badawczy PL

PCA AP 061 • Warszawa, Poland • 5 calibration items

Metrology & calibration

Centralny Instytut Ochrony Pracy - Państwowy Instytut Badawczy is a calibration laboratory accredited by PCA under number AP 061 (Warszawa, Poland). Its accreditation scope covers 5 calibration items in the following areas: Metrology & calibration. Calibrated items include: Meters for measuring electromagnetic fields, Anemometers, Aspirators, Electric field strength meters. Most frequently used calibration principles: Internal procedure; At permanent location (S).

At a glance

Accreditation number: PCA AP 061
Calibration items in scope: 5
Types of calibrated items: 9
Calibration principles used: 1
City: Warszawa, Poland
Valid until: 27-01-2028

Accreditation number: AP 061
Accreditation body: PCA
Address: ul. Czerniakowska 16, 00-701 Warszawa
City: Warszawa, Poland
Division: Zespół Laboratoriów Wzorcujących
Valid until: 27-01-2028

What this laboratory calibrates (9)

Meters for measuring electromagnetic fields — 2 calibration items
Anemometers — 1 calibration item
Aspirators — 1 calibration item
Electric field strength meters — 1 calibration item
Flowmeters of energy expenditure meters — 1 calibration item
Magnetic field strength meters — 1 calibration item
Magnetic induction meters — 1 calibration item
Meters for measuring magnetostatic fields — 1 calibration item
Thermal anemometers — 1 calibration item

Calibration principles (1)

Internal procedure; At permanent location (S) — 5 calibration items

Certificate information

Issue date: 26.11.2025
Issue no.: 22
Certificate date: 23.07.2020
Accreditation cycle: 04.01.2024 — 27.01.2028
Approved by: Katarzyna Wiśniewska

Accreditation scope — calibration items (5)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units. The measurement uncertainty value for CMC expressed as a percentage is the relative measurement uncertainty and refers to the percentage share in the measured value.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Meters for measuring magnetostatic fields Meters for measuring electromagnetic fields Magnetic field strength meters Magnetic induction meters	Calibration — Magnetic quantities for magnetostatic field — 0,0001 mT to 100 mT · CMC 2,8 % for magnetostatic field — 100 mT to 500 mT · CMC 0,1 % for alternating magnetic field, 20 Hz to 1000 Hz — 0,1 A/m to 2000 A/m · CMC 3,4 % for alternating magnetic field, 20 Hz to 1000 Hz — 0,1 A/m to 30000 A/m · CMC 4,0% for alternating magnetic field, 1 kHz to 50 kHz — 0,1 A/m to 150 A/m · CMC 3,0% for alternating magnetic field, 50 kHz to 100 kHz — 0,1 A/m to 150 A/m · CMC 5,0% Magnetic quantities	Internal procedure; At permanent location (S)	PWS/NA4-7 w oparciu o IEEE Std 1309:2013; PWS/NA4-30
2	Meters for measuring electromagnetic fields Electric field strength meters	Calibration — Electromagnetic quantities 15 Hz to 1000 Hz — 100 V/m to 25000 V/m · CMC 2,2 % 50 Hz to 100 kHz — 1 V/m to 17000 V/m · CMC 5,9 % 0,1 MHz to 0,5 MHz — 0,5 V/m to 450 V/m · CMC 19,2 % 0,5 MHz to 130 MHz — 0,5 V/m to 450 V/m · CMC 11,8 % 130 MHz to 230 MHz — 0,5 V/m to 450 V/m · CMC 15,6 % 230 MHz to 410 MHz — 0,5 V/m to 100 V/m · CMC 12,0 % 410 MHz 890 MHz — 0,5 V/m to 60 V/m · CMC 36,3 % 900 MHz — 0,5 V/m to 100 V/m · CMC 15,8 % 910 MHz to 2500 MHz — 0,5 V/m to 60 V/m · CMC 44,6 % 2500 MHz to 5000 MHz — 0,5 V/m to 45 V/m · CMC 68,3 % Electromagnetic quantities	Internal procedure; At permanent location (S)	PWS/NA4-1 w oparciu o IEEE Std 1309:2013; PWS/NA4-13 w oparciu o IEEE Std 1309:2013
3	Flowmeters of energy expenditure meters	Calibration — Volume flow rate (flow – gases) 10 dm³/min to 65 dm³/min · CMC 2,3 % Volume flow rate (flow – gases)	Internal procedure; At permanent location (S)	PWS/LM-2
4	Aspirators	Calibration — Volume flow rate (flow – gases) 1 dm³/min to 5 dm³/min · CMC 0,1 dm³/min Volume flow rate (flow – gases)	Internal procedure; At permanent location (S)	PWS/LM-7
5	Anemometers Thermal anemometers	Calibration — Air velocity (flow – gases) 0,15 m/s to 1,25 m/s · CMC 0,06 m/s 1,25 m/s to 7,5 m/s · CMC 0,21 m/s 7,5 m/s to 40 m/s · CMC 0,70 m/s Air velocity (flow – gases)	Internal procedure; At permanent location (S)	PWS/NC5-1

Reference standards (8)

IEEE Std 1309:2013

PWS/LM-2

PWS/LM-7

PWS/NA4-1

PWS/NA4-13

PWS/NA4-30

PWS/NA4-7

PWS/NC5-1

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20061