🇵🇱 ORLEN LABORATORIUM S.A. PL
Water & wastewaterPetrochemistry & fuelsMaterials & polymersMicrobiology
ORLEN LABORATORIUM S.A. is a laboratory accredited by PCA under number AB 474 (Płock, Poland). Its accreditation scope covers 161 test methods in the following areas: Water & wastewater, Petrochemistry & fuels, Materials & polymers, Microbiology. Test objects include: Water, wastewater, Water, water intended for human consumption, Gaseous fuels: - LPG, liquefied petroleum gases, Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other pe…. Most frequently used techniques: Spectrophotometric method, Gravimetric method, Visual method.
At a glance
- Accreditation number: PCA AB 474
- Methods in scope: 161
- Types of test objects: 44
- Techniques used: 47
- City: Płock, Poland
- Accreditation number
- AB 474
- Accreditation body
- PCA
- Address
- ul. Chemików 7, 09-411 Płock, Laboratorium Rafinerii Gdańsk, ul. Elbląska 135
- City
- Płock, Poland
What this laboratory tests (44)
- Water, wastewater — 19 methods
- Water, water intended for human consumption — 12 methods
- Gaseous fuels: - LPG, liquefied petroleum gases — 11 methods
- Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates — 10 methods
- Other petroleum products: - paving and industrial bitumens and bituminous products — 9 methods
- Water, water intended for human consumption, wastewater — 8 methods
- Liquid fuels: - unleaded petrol — 7 methods
- Water — 7 methods
- Water intended for human consumption — 6 methods
- Liquid fuels: - diesel fuels, fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricating materials: - base oils, engine oils, industrial lubricating oils, used oils, Other petroleum products: - paraffins, slack wax, petroleum distillates — 5 methods
- Liquid fuels: - kerosene, aviation turbine fuel — 5 methods
- Wastewater — 5 methods
- Crude oil — 4 methods
- Water (including swimming pool water), water intended for human consumption — 4 methods
- Water intended for human consumption, swimming pool water — 4 methods
- and 29 more
Analytical techniques used (47)
- Spectrophotometric method — 23 methods
- Gravimetric method — 12 methods
- Visual method — 11 methods
- Gas chromatography with flame ionization detection (GC-FID) — 8 methods
- Titrimetric method — 8 methods
- Membrane filtration method — 6 methods
- Flame atomic absorption spectrometry (FAAS) — 4 methods
- Ion chromatography with conductometric detection (IC-CD) — 4 methods
- Spectrometry method in the infrared range (IR) — 4 methods
- Conductometric method — 3 methods
- Distillation method — 3 methods
- Electrochemical method — 3 methods
- Motor method — 3 methods
- Optical method — 3 methods
- Potentiometric titration method — 3 methods
- and 32 more
Accreditation scope — test methods (161)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Test methods | |||||
| 1 | Water | Chemical oxygen demand - COD Range (6,0 – 150) mg/l O2 |
Spectrophotometric method | PN-ISO 15705:2005 | |
| 2 | Water | Electrical conductivity Range (10 – 10000) μS/cm |
Conductometric method | PN-EN 27888:1999 | |
| 3 | Water intended for human consumption | Total organic carbon (TOC) concentration Dissolved carbon concentration organic (DOC) Range (1,0 – 20) mg/l |
Spectrometry method in the infrared range (IR) | PN-EN 1484:1999 | |
| 4 | Water intended for human consumption | Electrical conductivity Range (10 – 3000) μS/cm |
Conductometric method | PN-EN 27888:1999 | |
| 5 | Wastewater | Anion concentrations fluorides (0,2 – 25) mg/l chlorides (0,5 – 5000) mg/l sulfates (0,5 – 500) mg/l nitrates (0,1 – 15) mg/l mg/l NNO3 nitrites (0,1 – 5) mg/l mg/l NNO2 |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 6 | Wastewater | Chemical oxygen demand - COD Range (10 – 20000) mg/l O2 |
Spectrophotometric method | PN-ISO 15705:2005 | |
| 7 | Wastewater | Ammonium nitrogen concentration Range (0,1 – 30) mg/l |
Spectrophotometric method | M042 PB-1 wydanie 4 z dnia 01.06.2018 r. na podstawie testu Merck 1.14752.0001 | |
| 8 | Wastewater | Electrical conductivity Range (10 – 10000) μS/cm |
Conductometric method | PN-EN 27888:1999 | |
| 9 | Water, water intended for human consumption | Anion concentrations chlorates (0,05 – 1,0) mg/l chlorites (0,10 – 1,0) mg/l |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-4:2022-08 | |
| 10 | Water, water intended for human consumption | Sum of chlorate and chlorite concentrations (calculated) | PN-EN ISO 10304-4:2022-08 | ||
| 11 | Water, water intended for human consumption | Total content of calcium and magnesium (total hardness) Range (0,05 – 20,0) mmol/l Range (0,1 – 40,0) mval/l Range (5 – 2000) mg/l CaCO3 |
Titrimetric method | PN-ISO 6059:1999 | |
| 12 | Water, water intended for human consumption | Manganese concentration Range (0,010 – 2,0) mg/l |
Spectrophotometric method | M514 PB-1 wydanie 3 z dnia 05.03.2025 r. na podstawie testu Merck 1.01846.0001 | |
| 13 | Water, water intended for human consumption | Ammonium nitrogen concentration Range (0,05 – 3,0) mg/l NNH4 Range (0,07 – 4,0) mg/l NH4 |
Spectrophotometric method | M042 PB-1 wydanie 4 z dnia 01.06.2018 r. na podstawie testu Merck 1.14752.0001 | |
| 14 | Water, water intended for human consumption | Calcium concentration Range (0,05 – 20) mmol/l Range (0,1 – 40) mval/l Range (2 – 800) mg/l Ca |
Titrimetric method | PN-ISO 6058:1999 | |
| 15 | Water, water intended for human consumption | Colour Range (5 – 70) mg/l Pt |
Visual method | PN-EN ISO 7887:2012+Ap1:2015 Metoda D | |
| 16 | Water, water intended for human consumption | Colour Range (5 – 50) mg/l Pt |
Spectrophotometric method | PN-EN ISO 7887:2012+Ap1:2015 Metoda C | |
| 17 | Water, water intended for human consumption | Total alkalinity Range (0,40 – 25) mmol/l Range (0,40 – 25) mval/l |
Titrimetric method | PN-EN ISO 9963-1:2001+Ap1:2004 | |
| 18 | Water, water intended for human consumption | Anion concentrations fluorides (0,2 – 10,0) mg/l chlorides (0,5 – 5000) mg/l sulfates (0,5 – 500) mg/l nitrites (0,1 – 20) mg/l |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 19 | Water, water intended for human consumption | Magnesium concentration (calculated) | PN-C-04554-4:1999 Załącznik A | ||
| 20 | Water, water intended for human consumption, wastewater | Iron concentration Range (0,020 – 10,0) mg/l |
Spectrophotometric method | PN-ISO 6332:2001+Ap1:2016 | |
| 21 | Water, water intended for human consumption, wastewater | Chloride concentration Range (5,0 – 5000) mg/l |
Titrimetric method | PN-ISO 9297:1994 | |
| 22 | Water, water intended for human consumption, wastewater | Nitrite concentration Range (0,01 – 0,5) mg/l NO2 Nitrite nitrogen concentration (calculated) |
Spectrophotometric method | PN-EN 26777:1999 | |
| 23 | Water, water intended for human consumption, wastewater | Nitrate nitrogen concentration Range (0,10 – 12) mg/l NNO3 Range (0,50 – 50) mg/l NO3 |
Spectrophotometric method | PN-82/C-04576.08 | |
| 24 | Water, water intended for human consumption, wastewater | Ammonium nitrogen concentration Range (0,05 – 50) mg/l NNH4 Range (0,07 – 64) mg/l NH4 |
Spectrophotometric method | PN-ISO 7150-1:2002 | |
| 25 | Water, water intended for human consumption, wastewater | Boron concentration Range (0,1 – 25) mg/l |
Spectrophotometric method | PN-75/C-04563-01 | |
| 26 | Water, wastewater | Sulfate concentration Range (10 – 1000) mg/l |
Gravimetric method | PN-ISO 9280:2002 | |
| 27 | Water, wastewater | Ammonium nitrogen concentration Range (0,5 – 2000) mg/l |
Titrimetric method | PN-ISO 5664:2002 | |
| 28 | Water, wastewater | Total organic carbon (TOC) concentration Dissolved carbon concentration organic (DOC) Range (1,0 – 1000) mg/l |
Spectrometry method in the infrared range (IR) | PN-EN 1484:1999 | |
| 29 | Water, wastewater | Total phosphorus concentration Range (0,05 – 50) mg/l |
Spectrophotometric method | PN-EN ISO 6878:2006+Ap1:2010 +Ap2:2010 | |
| 30 | Water, wastewater | Dissolved oxygen concentration Range (0,5 – 12,0) mg/l |
Electrochemical method | PN-EN ISO 5814:2013-04 | |
| 31 | Water, wastewater | Biochemical oxygen demand BOD5 Range (3 – 1000) mg/l O2 |
Electrochemical method | PN-EN ISO 5815-1:2019-12 | |
| 32 | Water, wastewater | Biochemical oxygen demand BOD5 Range (0,5 – 6,0) mg/l O2 |
Electrochemical method | PN-EN 1899-2:2002 | |
| 33 | Water, wastewater | Total nitrogen concentration Range (0,5 – 250) mg/l |
Spectrophotometric method | M043 PB-1 wydanie 4 z dnia 14.06.2016 r. na podstawie testu Merck 1.14537.0001 | |
| 34 | Water, wastewater | Total suspended solids (TSS) Range (2 – 1500) mg/l |
Gravimetric method | PN-EN 872:2007+Ap1:2007 | |
| 35 | Water, wastewater | Phosphate concentration Range (0,02 – 50) mg/l P Range (0,03 – 153) mg/l PO4 Range (0,02 – 115) mg/l P2O5 |
Spectrophotometric method | M701 PB-1 wydanie 4 z dnia 07.06.2024 r. na podstawie testu Supelco 1.14848.0001 | |
| 36 | Water, wastewater | Total phosphorus concentration Range (0,05 – 50) mg/l P Range (0,2 – 153) mg/l PO4 Range (0,1 – 115) mg/l P2O5 |
Spectrophotometric method | M702 PB-1 wydanie 4 z dnia 07.06.2024 r. na podstawie testu Supelco 1.14543.0001 | |
| 37 | Water, wastewater | Sulfide concentration Range (0,02 – 20) mg/l |
Spectrophotometric method | M703 PB-1 wydanie 3 z dnia 15.06.2018 r. na podstawie testu Merck 1.14779.0001 | |
| 38 | Water, wastewater | Phenol index Range (0,1 – 100) mg/l |
Spectrophotometric method | PN-ISO 6439:1994 Metoda A | |
| 39 | Water, wastewater | Phenol index Range (0,005 – 0,1) mg/l |
Spectrophotometric method | PN-ISO 6439:1994 Metoda B | |
| 40 | Water, wastewater | Kjeldahl nitrogen concentration Range (0,7 – 250) mg/dm3 |
Titrimetric method | PN-EN 25663:2001 | |
| 41 | Water, wastewater | Total nitrogen concentration (calculated) | M043 PB-2 wydanie 2 z dnia 13.03.2015 r. | ||
| 42 | Water, wastewater | Concentration of organic substances extractable with petroleum ether Range (0,5 – 2000) mg/l |
Gravimetric method | PN-86/C-04573-01 | |
| 43 | Water, wastewater | Concentration of anionic surfactants (anionic detergents) Range (0,1 – 10) mg/l |
Spectrophotometric method | PN-EN 903:2002 | |
| 44 | Water (including swimming pool water), water intended for human consumption | Permanganate index Range (0,5 – 10) mg/l O2 |
Titrimetric method | PN-EN ISO 8467:2001 | |
| 45 | Water (including swimming pool water), water intended for human consumption | Anion concentrations nitrates (0,1 – 50) mg/l |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 46 | Water (including swimming pool water), water intended for human consumption | Turbidity Range (0,10 – 20) NTU |
Nephelometric method | PN-EN ISO 7027:1-2016-09 | |
| 47 | Water (including swimming pool water), water intended for human consumption | Total chlorine concentration Range (0,05 – 5,0) mg/l Free chlorine concentration Range (0,05 – 5,0) mg/l |
Photometric method | M507 PB-1 wydanie 3 z dnia 13.04. 2021 r. na podstawie HACH LANGE LCK310 | |
| 48 | Water (including swimming pool water), water intended for human consumption, wastewater | pH Range 4,0 – 12,0 |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 49 | Sewage sludge | Relative volume (sludge settleability) Range (10 – 1000) ml/l |
Volumetric method | PN-EN 14702-1:2008 | |
| 50 | Sewage sludge | Sludge volume index (calculated) | PN-EN 14702-1:2008 | ||
| 51 | Chemical products - sodium hydroxide solution | Sodium hydroxide content Range (10,0 – 50,0) % |
Titrimetric method | PN-88/C-84002/02 | |
| 52 | Water intended for human consumption | Total viable count at 22°C | Plate method (pour plate) | PN-EN ISO 6222:2004 | |
| 53 | Water intended for human consumption | Coliform bacteria count | Membrane filtration method | PN-EN ISO 9308-1:2014-12 +A1:2017-04 | |
| 54 | Water intended for human consumption | Presence and count of intestinal enterococci | Membrane filtration method | PN-EN ISO 7899-2:2004 | |
| 55 | Water intended for human consumption, swimming pool water | Escherichia coli count | Membrane filtration method | PN-EN ISO 9308-1:2014-12 +A1:2017-04 | |
| 56 | Water intended for human consumption, swimming pool water | Total viable count at 36°C | Plate method (pour plate) | PN-EN ISO 6222:2004 | |
| 57 | Water intended for human consumption, swimming pool water | Pseudomonas aeruginosa bacteria count | Membrane filtration method | PN-EN ISO 16266:2009 | |
| 58 | Water intended for human consumption, swimming pool water | Combined chlorine concentration (calculated) | M507 PB-1 wydanie 3 z dnia 13.04. 2021 r. na podstawie testu HACH LANGE LCK 310 | ||
| 59 | Water intended for human consumption | Legionella bacteria count Range od 1 jtk/100 ml from 1 CFU/1000 ml Matrix A; Procedure 5 (medium A – BCYE) Matrix A; Procedure 7 (medium C – GVPC) Matrix B; Procedure 7 (medium C – GVPC) |
Membrane filtration method | PN-EN ISO 11731:2017-08+Ap1:2019-12 | |
| 60 | Water (including swimming pool water) | Legionella bacteria count Range od 1 jtk/100 ml Matrix A; Procedure 5 (medium A – BCYE) Matrix A; Procedure 7 (medium C – GVPC) Matrix B; Procedure 7 (medium C – GVPC) |
Membrane filtration method | PN-EN ISO 11731:2017-08+Ap1:2019-12 | |
| 61 | Water, water intended for human consumption | Most probable number of coliform bacteria and Escherichia coli | MPN method | PN-EN ISO 9308-2:2014-06 | |
| 62 | Swimming pool water | Oxidation-reduction (redox) potential vs. Ag/AgCl 3,5 mol/l KCl Range (200 – 1000) mV |
Potentiometric method | M525 PB-1 wydanie 1 z dnia 13.04.2021 | |
| 63 | Liquid fuels: - unleaded petrols, diesel fuels, heating oil, marine fuel, Other petroleum products: - petroleum distillates | Sulfur content Range (0,1 – 500) mg/kg |
Ultraviolet fluorescence method | PN-EN ISO 20846:2020-03 | |
| 64 | Liquid fuels: - unleaded petrols, diesel fuels, fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils, Other petroleum products: - paraffin waxes, slack wax, petroleum distillates | Sulfur content Range (5,0 – 500) mg/kg |
Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) | PN-EN ISO 20884:2020 +A1:2022-03 | |
| 65 | Liquid fuels: - unleaded petrols, diesel fuels, fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils, Other petroleum products: - paraffin waxes, slack wax, petroleum distillates | Sulfur content Range (0,0003 – 4,5) % (m/m) |
Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) | ASTM D 2622-24 a | |
| 66 | Liquid fuels: - unleaded petrol | Content of oxygenated organic compounds and total content of organically bound oxygen Ethers (0,20 – 20,00) % (m/m) % (v/v) Alcohols (0,20 – 12,00) % (m/m) ) % (v/v) Total oxygen content (calculated) |
Gas chromatography with flame ionization detection (GC-FID) | ASTM D 4815-22 | |
| 67 | Liquid fuels: - unleaded petrol | Benzene content Range (0,1 – 20,0) % (v/v) |
Spectrometry method in the infrared range (IR) | PN-EN 238:2000+A1:2008 | |
| 68 | Liquid fuels: - unleaded petrol | Hydrocarbon group content Aromatic hydrocarbons Range (19,3 – 46,3) % (v/v) Olefinic hydrocarbons (0,4 – 26,8) % (v/v) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 22854:2025-07 Procedura A | |
| 69 | Liquid fuels: - unleaded petrol | Content of oxygenated organic compounds and total content of organically bound oxygen Range (0,17 – 15,0) % (m/m) ) % (v/v) Organically bound oxygen (calculated) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13132:2005 | |
| 70 | Liquid fuels: - unleaded petrol | Octane number MON Range 40,0 – 100,0 |
Motor method | PN-EN ISO 5163:2014-08 | |
| 71 | Liquid fuels: - unleaded petrol | Octane number RON Range 40,0 – 100,0 |
Motor method | PN-EN ISO 5164:2014-08 | |
| 72 | Liquid fuels: - diesel fuels, fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricating materials: - base oils, engine oils, industrial lubricating oils, used oils, Other petroleum products: - paraffins, slack wax, petroleum distillates | Carbon, hydrogen and nitrogen content Carbon (75 – 87) % (m/m) Hydrogen (9 – 16) % (m/m) Nitrogen (0,1 – 2) % (m/m) |
High-temperature combustion with TCD detection | ASTM D 5291-21 metoda C | |
| 73 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Content of aromatic hydrocarbon groups monocyclic aromatic hydrocarbons (MAH) Range (6,0 – 30,0) % (m/m) diaromatic hydrocarbons (DAH) (1,0 – 10,0) % (m/m) tri- and polycyclic aromatic hydrocarbons (T+AH) (0,1 – 2,0) % (m/m) polycyclic hydrocarbons (POLY-AH) (1,0 – 12,0) % (m/m) |
High-performance liquid chromatography with refractive index detection (HPLC-RID) | PN-EN 12916:2024-08 Procedura A | |
| 74 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Total content of aromatic hydrocarbons (calculated) | PN-EN 12916:2024-08 Procedura A | ||
| 75 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Lubricity Range (180 – 700) μm |
HFRR method | PN-EN ISO 12156-1:2024-02 | |
| 76 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Fatty acid methyl esters (FAME) content Range (0,05 – 20,0) % (v/v) |
Spectrometry method in the infrared range (IR) | PN-EN 14078:2014-06 | |
| 77 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Solvent RED 19 dye content Range (1,0 – 15,0) mg/l |
Spectrophotometric method | PN-C-04426:2013-07 Metoda A | |
| 78 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | BLUE 35 dye content Range (1,0 – 15,0) mg/l |
Spectrophotometric method | PN-C-04426:2013-07 Metoda C | |
| 79 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Cetane number Range 30,0 – 65,0 |
Motor method | PN-EN ISO 5165:2021-02 | |
| 80 | Liquid fuels: - unleaded petrol, Other petroleum products petroleum with a boiling range 10°C-225°C, components: - petrol fractions | Detailed composition for hydrocarbons up to n-nonane (C9) Range (0,05 –90) % (m/m) |
Gas chromatography with flame ionization detection (GC-FID) | ASTM D5134-21 | |
| 81 | Other petroleum products: - paving and industrial bitumens and bituminous products | Carbon, hydrogen and nitrogen content Carbon (75 – 87) % (m/m) Hydrogen (9 – 16) % (m/m) Nitrogen (0,1 – 2) % (m/m) |
High-temperature combustion with TCD detection | ASTM D 5291-21 metoda C | |
| 82 | Gaseous fuels: - LPG, liquefied petroleum gases | Sulfur content Range (1,0 – 100) mg/kg |
Ultraviolet fluorescence method | ASTM D 6667-21 | |
| 83 | Gaseous fuels: - LPG, liquefied petroleum gases | Hydrocarbon composition Range (0,1 – 99,9) % (m/m) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 27941:2015-12 | |
| 84 | Gaseous fuels: - LPG, liquefied petroleum gases | Total diene content (as 1,3-butadiene) Range (0,1 – 1,0) % (mol/mol) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 27941:2015-12 | |
| 85 | Gaseous fuels: - LPG, liquefied petroleum gases | Density at 15°C (calculated) | PN-EN ISO 8973:2000+A1:2020-10 | ||
| 86 | Gaseous fuels: - LPG, liquefied petroleum gases | Vapour pressure estimated at temperatures: -10°C, -5°C, 0°C, 10°C, 37,8°C, 40°C, 50°C, 70°C (calculated) | PN-EN ISO 8973:2000+A1:2020-10 | PN-EN 589:2024-08 załącznik C | ||
| 87 | Gaseous fuels: - LPG, liquefied petroleum gases | Motor octane number (MON) (calculated) | PN-EN 589:2024-08 załącznik B | ||
| 88 | Gaseous fuels: - LPG, liquefied petroleum gases | Composition of refinery gases: H2, C1 – C5 hydrocarbons determined as individual components, unsaturated C5 and C6 as one group Range (0,1 – 99,9) % (mol) |
Gas chromatography with flame ionization detection (GC-FID) | UOP 539-12 | |
| 89 | Gaseous fuels: - LPG, liquefied petroleum gases | Copper strip corrosion Range klasa korozji 1 – 4 |
Visual method | PN-EN ISO 6251:2001 | |
| 90 | Gaseous fuels: - LPG, liquefied petroleum gases | Water content Range obecna/nieobecna |
Visual method | PN-EN 15469:2009 | |
| 91 | Gaseous fuels: - LPG, liquefied petroleum gases | Temperature at which the estimated relative vapour pressure is not less than 200 kPa (calculated) | PN-EN 589:2024-08 załącznik C | ||
| 92 | Gaseous fuels: - LPG | Soluble residue Range (5 – 100) mg/kg |
Gravimetric method | PN-EN 15471:2017-08 | |
| 93 | Water, water intended for human consumption, wastewater | Element concentration Ag (0,4 – 10) μg/l Al (2 – 200) μg/l As (2 – 100) μg/l Cd (0,2 – 5) μg/l Co (2 – 60) μg/l Cr (1 – 60) μg/l Cu (1– 2000) μg/l Fe (2 – 200) μg/l Mn (1 – 40) μg/l Mo (2 – 60) μg/l Ni (2 – 70) μg/l Pb (2 – 100) μg/l Se (3 – 150) μg/l V (3 – 200) μg/l Zn (0,5 – 20) μg/l |
Electrothermal atomization atomic absorption spectrometry (ETAAS) | PN-EN ISO 15586:2005 | |
| 94 | Water, water intended for human consumption, wastewater | Mercury concentration Range (0,05 – 10,0) μg/l |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN ISO 12846:2012+Ap1:2016-07 | |
| 95 | Water, wastewater | Mineral oil index Range (0,10 – 600) mg/l |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 9377-2:2003 | |
| 96 | Water | Zinc concentration Range (0,02 – 2,0) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 8288:2002 Metoda A | |
| 97 | Water | Sodium concentration Range (1 – 500) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 9964-1:1994+Ap1:2009 | |
| 98 | Water | Potassium concentration Range (1 – 500) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 9964-2:1994 | |
| 99 | Water | Calcium and magnesium concentration calcium (1 – 500) mg/l magnesium (1 – 500) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-EN ISO 7980:2002 | |
| 100 | Crude oil | Water content Range (0,02 – 2,0) % (m/m) |
Potentiometric titration method | ASTM D 4377-00(2011) | |
| 101 | Crude oil | Water content Range (0,025 – 5,0) % (m/m) |
Distillation method | PN-EN ISO 9029:2005 | ASTM D 4006-22 | |
| 102 | Crude oil | Water content Range (0,02 – 4,70) % (m/m) |
Coulometric titration method | ASTM D 4928-24 Procedura A | |
| 103 | Liquid fuels: - marine fuels, Lubricants: - base oils, engine oils, industrial lubricating oils, Other petroleum products: - petroleum distillates | Water content Range (0,03 – 25,0) % (m/m) |
Distillation method | PN-ISO 3733:2008 | ASTM D 95-23e1 | |
| 104 | Liquid fuels: - unleaded petrols, diesel fuels, heating oil, marine fuel, kerosene, aviation turbine fuel, aviation gasoline, liquid biofuels: fatty acid methyl esters (FAME), Lubricants: - base oils, engine oils, industrial lubricating oils, used oils, Other petroleum products: - paraffins, slack wax, petroleum distillates, Chemical products: - additives for liquid fuels and lubricants | Density at 15°C and 20°C Range (643,0 – 1037,0) kg/m3 Range (0,6430 – 1,0370) g/cm3 |
Oscillation method | PN-EN ISO 12185:2024-08 | ASTM D 4052-22 | |
| 105 | Crude oil | Density at 15°C and 20°C Range (643,0 – 1037,0) kg/m3 Range (0,6430 – 1,0370) g/cm3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 106 | Liquid fuels: - unleaded petrols, diesel fuels, light fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, Other petroleum products: - petroleum distillates | Copper strip corrosion Range klasa korozji 1 – 4 |
Visual method | PN-EN ISO 2160:2004 | |
| 107 | Liquid fuels: - unleaded petrols, diesel fuels, light fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, Other petroleum products: - petroleum distillates | Copper strip corrosion Range klasa korozji 1a – 4c |
Visual method | ASTM D 130-19 | |
| 108 | Liquid fuels: - unleaded petrols, diesel fuels, light fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, Other petroleum products: - petroleum distillates | Water content Range (0,003 – 0,100) % (m/m) |
Coulometric titration method | PN-EN ISO 12937:2005 +Ap.1:2021-11 | ASTM D 6304-20 | |
| 109 | Liquid fuels: - unleaded petrols, diesel fuels, heating oil, marine fuel, kerosene, aviation turbine fuel, aviation gasoline, Other petroleum products: - petroleum distillates, light fuel components, Crude oil | Fractional composition Range (20,0 – 380,0) °C |
Distillation method | PN-EN ISO 3405:2019-05 | ASTM D 86-23ae2 | |
| 110 | Liquid fuels: - unleaded petrol | Volatility index (calculated) | PN-EN 228+A1:2017-06 Tablica NA.2 | ||
| 111 | Liquid fuels: - unleaded petrols, Other petroleum products: - petroleum distillates, light fuel components | Air saturated vapour pressure Range (9,0 – 110,0) kPa |
Mini Reid method | PN-EN 13016-1:2024-11 | ASTM D 5482-20a | |
| 112 | Liquid fuels: - unleaded petrols, kerosene, aviation turbine fuel | Hydrocarbon group content aromatic hydrocarbons Range (5,0 – 80,0) % (v/v) olefinic hydrocarbons (0,3 – 15,0) % (v/v) |
Gel permeation chromatography method | PN-EN 15553+A1:2025-05 | ASTM D 1319-20a | |
| 113 | Liquid fuels: - unleaded petrols, kerosene, aviation turbine fuel | Gum content existent gums, washed gums Range (1 – 30) mg/100 ml unwashed gums (1 – 60) mg/100 ml |
Gravimetric method | PN-EN ISO 6246:2017-05/A1:2020-03 | ASTM D 381-25 | |
| 114 | Liquid fuels: - unleaded petrols, kerosene, aviation turbine fuel, Other petroleum products: - paraffin waxes, slack wax | Colour Range 30 – (-16) |
Spectrophotometric method | ASTM D 6045-20 | |
| 115 | Liquid fuels: - unleaded petrols, kerosene, aviation turbine fuel, Other petroleum products: - paraffin waxes, slack wax | Colour Range 30 – (-16) |
Visual method | ASTM D 156-23 | |
| 116 | Liquid fuels: - diesel fuels, marine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, Other petroleum products: - paraffin waxes, slack wax, petroleum distillates | Colour Range 0,5 – 8,0 |
Spectrophotometric method | ASTM D 6045-20 | |
| 117 | Liquid fuels: - diesel fuels, marine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, Other petroleum products: - paraffin waxes, slack wax, petroleum distillates | Colour Range 30 – (-16) |
Visual method | ASTM D 156-23 | |
| 118 | Liquid fuels: - diesel fuels, marine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, Other petroleum products: - paraffin waxes, slack wax, petroleum distillates | Colour Range 0,5 – 8,0 |
Visual method | ASTM D 1500-24 | |
| 119 | Liquid fuels: - diesel fuels, fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricating materials: - base oils, engine oils, industrial lubricating oils, used oils, Other petroleum products: - paraffins, slack wax, petroleum distillates | Kinematic viscosity at temperatures: (-20°C, 20°C, 40°C, 50°C, 100°C) Range (1,000 – 1100) mm2/s Dynamic viscosity (calculated) |
Capillary method | PN-EN ISO 3104:2024-01 | ASTM D 445-24 | |
| 120 | Liquid fuels: - diesel fuels, fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricating materials: - base oils, engine oils, industrial lubricating oils, used oils, Other petroleum products: - paraffins, slack wax, petroleum distillates | Flash point Range (40,0 – 320,0)°C |
Pensky-Martens closed cup method | PN-EN ISO 2719:2016-08 +A1:2021-06 | ASTM D 93-25 | |
| 121 | Liquid fuels: - diesel fuels, fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricating materials: - base oils, engine oils, industrial lubricating oils, used oils, Other petroleum products: - paraffins, slack wax, petroleum distillates | Flash point and fire point Range (80 – 360) °C |
Cleveland open cup method | PN-EN ISO 2592:2017-10 | ASTM D 92-24 | |
| 122 | Liquid fuels: - diesel fuels, fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricating materials: - base oils, engine oils, industrial lubricating oils, used oils, Other petroleum products: - paraffins, slack wax, petroleum distillates | Gross calorific value Range (30,00 – 50,00) MJ/kg Net calorific value (calculated) |
Calorimetric method | PN-C-04062:2018-05 | |
| 123 | Liquid fuels: - diesel fuels, heating oil, marine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, used oils, Other petroleum products: - petroleum distillates | Carbon residue Range (0,01 – 24,00) % (m/m) |
Gravimetric method | PN-EN ISO 10370:2014-12 | ASTM D 4530-25 | |
| 124 | Liquid fuels: - diesel fuels, fuel oil, marine fuel, Lubricants: -base oils, engine oils, industrial lubricating oils, Other petroleum products: - petroleum distillates | Pour point Range (- 45)°C – 30°C |
Optical method | PN-EN ISO 3016:2019-06 | |
| 125 | Liquid fuels: - diesel fuels, fuel oil, marine fuel, Lubricants: -base oils, engine oils, industrial lubricating oils, Other petroleum products: - petroleum distillates | Residue after incineration Range (0,001 – 0,180) % (m/m) |
Gravimetric method | PN-EN ISO 6245:2008 | ASTM D 482-19 | |
| 126 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Cetane index (calculated) | PN-EN ISO 4264:2018-08 | ASTM D 4737-21 | ||
| 127 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Cold filter plugging point Range (-40) °C – 10 °C |
Optical method | PN-EN 116:2015-09 | ASTM D 6371-24 | |
| 128 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Cloud point Range (-60,0) °C – 40,0 °C |
Optical method | ASTM D 5773-21 | |
| 129 | Liquid fuels: - kerosene, aviation turbine fuel | Flash point Range (35,0 – 65,0) °C dla cieczy o viscosity: < 5,5 mm2/s at 40°C, < 9,5 mm2/s at 25°C |
TAG closed cup method | PN-V-04043:2002 | ASTM D 56-22 | |
| 130 | Liquid fuels: - kerosene, aviation turbine fuel | Crystallisation temperature Range (-70)°C – (-30)°C |
Visual method | ASTM D 2386-19 | |
| 131 | Liquid fuels: - kerosene, aviation turbine fuel | Cetane index (calculated) | PN-EN ISO 4264:2018-08 | ASTM D 4737-21 | ||
| 132 | Liquid fuels: - kerosene, aviation turbine fuel | Water separation index (WSIM) Range 0 – 100 |
Turbidimetric method | ASTM D 3948-22 | |
| 133 | Liquid fuels: - kerosene, aviation turbine fuel | Oxidation stability at 260°C Range osady na rurze 0 – 4 A,P Pressure drop across the filter (0,1 – 200) mm Hg |
JFTOT method | ASTM D 3241-24 z wyłączeniem A2, A3 i A4 | |
| 134 | Liquid fuels: - kerosene, aviation turbine fuel, Other petroleum products: - fuel components for aviation turbine engines | Maximum height of a smokeless flame Range (15,0 – 40,0) mm |
Visual method | ASTM D 1322-25 | |
| 135 | Liquid fuels: - fuel oil, marine fuel | Total sediment content Range (0,01 – 0,50) % (m/m) |
Gravimetric method | PN-ISO 10307-1:2010 | PN-ISO 10307-2:2010 | |
| 136 | Liquid fuels: - fuel oil, marine fuel | Sulfated ash content Range (0,05 – 2,00) % (m/m) |
Gravimetric method | PN-ISO 3987:2014-05 | ASTM D 874-23 | |
| 137 | Other petroleum products: - slack waxes, paraffin waxes, ceresins, petroleum distillates | Oil content Range (0,5 – 15) % (m/m) |
Gravimetric method | ASTM D 721-25 | |
| 138 | Other petroleum products: - slack waxes, paraffin waxes, ceresins, petroleum distillates | Freezing point Range (30,0 – 90,0) °C |
Visual method | PN-ISO 2207:2011 | ASTM D 938-25 | |
| 139 | Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils | WL index (calculated) | ASTM D 2270-24 | PN-ISO 2909:2009+Ap1:2010 | ||
| 140 | Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils | Sulfated ash content Range (0,05 – 2,00) % (m/m) |
Gravimetric method | PN-ISO 3987:2014-05 | ASTM D 874-23 | |
| 141 | Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils, Other petroleum products: - petroleum distillates, Chemical products: - lubricant additives | Base number Range (1,0 – 100,0) mg KOH/g |
Potentiometric titration method | ASTM D 2896-21 Procedura B | |
| 142 | Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils, Other petroleum products: - petroleum distillates, Chemical products: - lubricant additives | Base number Range (1,0 – 100,0) mg KOH/g |
Potentiometric titration method | PN-ISO 3771:2012 | |
| 143 | Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils, Other petroleum products: - petroleum distillates, Liquid fuels: - diesel fuels | Acid value Range (0,01 – 8,0) mg KOH/g |
Potentiometric titrimetric method | ASTM D 664-24 | |
| 144 | Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils, Other petroleum products: - petroleum distillates, Liquid fuels: - diesel fuels | Acid value Range (0,01 – 8,0) mg KOH/g |
Potentiometric titrimetric method | PN-ISO 6619:2011 | |
| 145 | Liquid fuels: - diesel fuels, light heating oil | Impurity content Range (4,0 – 30,0) mg/kg |
Gravimetric method | PN-EN 12662-1:2024-11 | |
| 146 | Liquid fuels - unleaded petrols, diesel fuels, marine fuel, kerosene, aviation turbine fuel, heating oils, Lubricants - base oils, engine oils, industrial lubricating oils, Other petroleum products - petroleum distillates | Sampling from tanks for chemical and physical testing | PN-EN ISO 3170:2006 | ||
| 147 | Liquid fuels: - unleaded petrols, diesel fuels | Sampling for chemical and physical testing | PN-EN 14275:2013-06 | ||
| 148 | Gaseous fuels: - LPG | Sampling for chemical and physical testing | ZN/MG/CN-18:2007 | ||
| 149 | Gaseous fuels: - LPG, liquefied petroleum gases | Sampling for chemical and physical testing | PN-EN ISO 4257:2004 | ||
| 150 | Water | Sampling for chemical and physical testing Temperature of the water sample taken Range (0,5 – 50,0) °C |
PN-ISO 5667-5:2017-10 | PN-EN ISO 5667-6:2016-12 z wyłączeniem pkt. 7.5, 7.6 | PN-ISO 5667-11:2017-10 z wyłączeniem pkt. 5.2, 6.2, 6.3 | PN-77/C-04584 | ||
| 151 | Wastewater | Sampling for chemical and physical testing Temperature of the collected wastewater sample Range (0,5 – 50,0) °C |
Manual method; Automatic method | PN-ISO 5667-10:2021-11 | PN-77/C-04584 | |
| 152 | Water intended for human consumption, Swimming pool water | Sampling for microbiological testing | PN-EN ISO 19458:2007 | ||
| 153 | Swimming pool water | Sampling for chemical and physical testing Temperature of the water sample taken Range (0,5 – 50,0) °C |
M535 PB-1 wydanie 3 z dnia 12.09.2023 | PN-77/C-04584 | ||
| 154 | Other petroleum products: - paving and industrial bitumens and bituminous products | Needle penetration at 25°C Range (1 – 330) 0,1 mm |
Needle penetration method | PN-EN 1426:2025-02 | |
| 155 | Other petroleum products: - paving and industrial bitumens and bituminous products | Softening point Range (30 – 110) °C |
Ring and Ball method | PN-EN 1427:2015-08 | |
| 156 | Other petroleum products: - paving and industrial bitumens and bituminous products | Resistance to ageing under the influence of heat and air Range (-0,10 – (+0,15)) % (m/m) Percentage of retained penetration % (calculated) Change in softening point °C (calculated) |
RTFOT method | PN-EN 12607-1:2025-02 | |
| 157 | Other petroleum products: - paving and industrial bitumens and bituminous products | Brittleness temperature Range (-25)°C – (+10)°C |
Fraass method | PN-EN 12593:2015-08 | |
| 158 | Other petroleum products: - paving and industrial bitumens and bituminous products | Flash point and fire point Range (250 – 360) °C |
Cleveland open cup method | PN-EN ISO 2592:2017-10 | ASTM D 92-24 | |
| 159 | Other petroleum products: - paving and industrial bitumens and bituminous products | Elastic recovery Range (40 – 100) % |
Ductilometric method | PN-EN 13398:2017-12 | |
| 160 | Other petroleum products: - paving and industrial bitumens and bituminous products | Tensile force (cohesion energy) Range (4,0 – 10,0) J/cm2 |
Ductilometric method | PN-EN 13589:2018-08 | |
| 161 | Other petroleum products: - paving and industrial bitumens and bituminous products | Density and relative density Range (0,950 – 1,080) g/cm3 |
Pycnometric method | PN-EN 15326+A1:2010 | |
Reference standards (162)
ASTM D 130-19
ASTM D 1319-20a
ASTM D 1322-25
ASTM D 1500-24
ASTM D 156-23
ASTM D 2270-24
ASTM D 2386-19
ASTM D 2622-24 a
ASTM D 2896-21 Procedura B
ASTM D 3241-24 z wyłączeniem A2, A3 i A4
ASTM D 381-25
ASTM D 3948-22
ASTM D 4006-22
ASTM D 4052-22
ASTM D 4377-00(2011)
ASTM D 445-24
ASTM D 4530-25
ASTM D 4737-21
ASTM D 4815-22
ASTM D 482-19
ASTM D 4928-24 Procedura A
ASTM D 5291-21 metoda C
ASTM D 5482-20a
ASTM D 56-22
ASTM D 5773-21
ASTM D 6045-20
ASTM D 6304-20
ASTM D 6371-24
ASTM D 664-24
ASTM D 6667-21
ASTM D 721-25
ASTM D 86-23ae2
ASTM D 874-23
ASTM D 92-24
ASTM D 93-25
ASTM D 938-25
ASTM D 95-23e1
ASTM D5134-21
M042 PB-1 wydanie 4 z dnia 01.06.2018 r. na podstawie testu Merck 1.14752.0001
M043 PB-1 wydanie 4 z dnia 14.06.2016 r. na podstawie testu Merck 1.14537.0001
M043 PB-2 wydanie 2 z dnia 13.03.2015 r.
M507 PB-1 wydanie 3 z dnia 13.04. 2021 r. na podstawie HACH LANGE LCK310
M507 PB-1 wydanie 3 z dnia 13.04. 2021 r. na podstawie testu HACH LANGE LCK 310
M514 PB-1 wydanie 3 z dnia 05.03.2025 r. na podstawie testu Merck 1.01846.0001
M525 PB-1 wydanie 1 z dnia 13.04.2021
M535 PB-1 wydanie 3 z dnia 12.09.2023
M701 PB-1 wydanie 4 z dnia 07.06.2024 r. na podstawie testu Supelco 1.14848.0001
M702 PB-1 wydanie 4 z dnia 07.06.2024 r. na podstawie testu Supelco 1.14543.0001
M703 PB-1 wydanie 3 z dnia 15.06.2018 r. na podstawie testu Merck 1.14779.0001
PN-75/C-04563-01
PN-77/C-04584
PN-82/C-04576.08
PN-86/C-04573-01
PN-88/C-84002/02
PN-C-04062:2018-05
PN-C-04426:2013-07 Metoda A
PN-C-04426:2013-07 Metoda C
PN-C-04554-4:1999 Załącznik A
PN-EN 116:2015-09
PN-EN 12593:2015-08
PN-EN 12607-1:2025-02
PN-EN 12662-1:2024-11
PN-EN 12916:2024-08 Procedura A
PN-EN 13016-1:2024-11
PN-EN 13132:2005
PN-EN 13398:2017-12
PN-EN 13589:2018-08
PN-EN 14078:2014-06
PN-EN 1426:2025-02
PN-EN 14275:2013-06
PN-EN 1427:2015-08
PN-EN 14702-1:2008
PN-EN 1484:1999
PN-EN 15326+A1:2010
PN-EN 15469:2009
PN-EN 15471:2017-08
PN-EN 15553+A1:2025-05
PN-EN 1899-2:2002
PN-EN 228+A1:2017-06 Tablica NA.2
PN-EN 238:2000+A1:2008
PN-EN 25663:2001
PN-EN 26777:1999
PN-EN 27888:1999
PN-EN 27941:2015-12
PN-EN 589:2024-08 załącznik B
PN-EN 589:2024-08 załącznik C
PN-EN 872:2007+Ap1:2007
PN-EN 903:2002
PN-EN ISO 10304-1:2009+AC:2012
PN-EN ISO 10304-4:2022-08
PN-EN ISO 10370:2014-12
PN-EN ISO 10523:2012
PN-EN ISO 11731:2017-08+Ap1:2019-12
PN-EN ISO 12156-1:2024-02
PN-EN ISO 12185:2024-08
PN-EN ISO 12846:2012+Ap1:2016-07
PN-EN ISO 12937:2005 +Ap.1:2021-11
PN-EN ISO 15586:2005
PN-EN ISO 16266:2009
PN-EN ISO 19458:2007
PN-EN ISO 20846:2020-03
PN-EN ISO 20884:2020 +A1:2022-03
PN-EN ISO 2160:2004
PN-EN ISO 22854:2025-07 Procedura A
PN-EN ISO 2592:2017-10
PN-EN ISO 2719:2016-08 +A1:2021-06
PN-EN ISO 3016:2019-06
PN-EN ISO 3104:2024-01
PN-EN ISO 3170:2006
PN-EN ISO 3405:2019-05
PN-EN ISO 4257:2004
PN-EN ISO 4264:2018-08
PN-EN ISO 5163:2014-08
PN-EN ISO 5164:2014-08
PN-EN ISO 5165:2021-02
PN-EN ISO 5667-6:2016-12 z wyłączeniem pkt. 7.5, 7.6
PN-EN ISO 5814:2013-04
PN-EN ISO 5815-1:2019-12
PN-EN ISO 6222:2004
PN-EN ISO 6245:2008
PN-EN ISO 6246:2017-05/A1:2020-03
PN-EN ISO 6251:2001
PN-EN ISO 6878:2006+Ap1:2010 +Ap2:2010
PN-EN ISO 7027:1-2016-09
PN-EN ISO 7887:2012+Ap1:2015 Metoda C
PN-EN ISO 7887:2012+Ap1:2015 Metoda D
PN-EN ISO 7899-2:2004
PN-EN ISO 7980:2002
PN-EN ISO 8467:2001
PN-EN ISO 8973:2000+A1:2020-10
PN-EN ISO 9029:2005
PN-EN ISO 9308-1:2014-12 +A1:2017-04
PN-EN ISO 9308-2:2014-06
PN-EN ISO 9377-2:2003
PN-EN ISO 9963-1:2001+Ap1:2004
PN-ISO 10307-1:2010
PN-ISO 10307-2:2010
PN-ISO 15705:2005
PN-ISO 2207:2011
PN-ISO 2909:2009+Ap1:2010
PN-ISO 3733:2008
PN-ISO 3771:2012
PN-ISO 3987:2014-05
PN-ISO 5664:2002
PN-ISO 5667-10:2021-11
PN-ISO 5667-11:2017-10 z wyłączeniem pkt. 5.2, 6.2, 6.3
PN-ISO 5667-5:2017-10
PN-ISO 6058:1999
PN-ISO 6059:1999
PN-ISO 6332:2001+Ap1:2016
PN-ISO 6439:1994 Metoda A
PN-ISO 6439:1994 Metoda B
PN-ISO 6619:2011
PN-ISO 7150-1:2002
PN-ISO 8288:2002 Metoda A
PN-ISO 9280:2002
PN-ISO 9297:1994
PN-ISO 9964-1:1994+Ap1:2009
PN-ISO 9964-2:1994
PN-V-04043:2002
UOP 539-12
ZN/MG/CN-18:2007