🇵🇱 SIEĆ BADAWCZA ŁUKASIEWICZ - INSTYTUT ELEKTROTECHNIKI PL
Materials & polymersConstructionMetrology & calibration
SIEĆ BADAWCZA ŁUKASIEWICZ - INSTYTUT ELEKTROTECHNIKI is a laboratory accredited by PCA under number AB 067 (Warszawa, Poland). Its accreditation scope covers 87 test methods in the following areas: Materials & polymers, Construction, Metrology & calibration. Test objects include: Composite, polymeric and organic materials insulators for nominal v…, Insulators for overhead lines with a nominal voltage above 1kV. Tra…, Voltage detectors - Capacitive type to be used for voltages exceedi…, Indoor and outdoor post insulators of ceramic material or glass for…. Most frequently used techniques: Dye penetration test / Dye penetration test, Lightning impulse withstand voltage tests / Lightning impulse withs…, Nominal power-frequency withstand voltage, dry test, 50 Hz.
At a glance
- Accreditation number: PCA AB 067
- Methods in scope: 87
- Types of test objects: 18
- Techniques used: 43
- City: Warszawa, Poland
- Accreditation number
- AB 067
- Accreditation body
- PCA
- Address
- ŁUKASIEWICZ RESEARCH NETWORK – INSTITUTE OF ELECTRICAL, ENGINEERING, ul. Pożaryskiego 28, 04-703 Warszawa, CENTRUM BADAWCZE MATERIAŁÓW ELEKTROTECHNICZNYCH
- City
- Warszawa, Poland
What this laboratory tests (18)
- Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV — 20 methods
- Insulators for overhead lines with a nominal voltage above 1kV. Traction ceramic insulators — 8 methods
- Voltage detectors - Capacitive type to be used for voltages exceeding 1 kV AC from 0,23 kV to 52 kV — 8 methods
- Indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V — 7 methods
- Insulating sticks and attachable devices under voltage up to 150 kV — 7 methods
- Low voltage power insulators – Ceramic insulators — 7 methods
- Ceramic and glass insulating materials — 6 methods
- Electrotechnical materials and products — 6 methods
- Spark-free metal oxide surge arresters for AC networks — 4 methods
- Insulated bushings for alternating voltages above 1000V — 3 methods
- Electrotechnical products, materials, components, plastics and protective coatings — 2 methods
- Insulating tongs and grippers — 2 methods
- Solid electrotechnical insulating materials — 2 methods
- Electrical insulating matting — 1 method
- Electrotechnical materials, components and devices (insulating materials and insulating parts of products) — 1 method
- and 3 more
Analytical techniques used (43)
- Dye penetration test / Dye penetration test — 2 methods
- Lightning impulse withstand voltage tests / Lightning impulse withstand voltage tests — 2 methods
- Nominal power-frequency withstand voltage, dry test, 50 Hz — 2 methods
- Nominal power-frequency withstand voltage, wet test, 50 Hz — 2 methods
- Test of galvanization / Test of galvanization. — 2 methods
- Aging in a Live Salt Spray Chamber — 1 method
- Bending Resistance Test — 1 method
- Compressive strength test — 1 method
- Determination of the average breaking tensile load — 1 method
- Galvanizing test — 1 method
- Glow Wire Method: — 1 method
- Hydrostatic method of weighting — 1 method
- Impulse voltage puncture test in air. — 1 method
- Impulse voltage test — 1 method
- Inspection of the fracture surface of ceramic body — 1 method
- and 28 more
Laboratory sections (3)
- Electrotechnical Materials Testing Laboratory; Insulator Research Group — 55 methods
- Electrotechnical Materials Testing Laboratory; Electrotechnical Materials and Products Research Group — 29 methods
- Electrotechnical Materials Testing Laboratory; Fire hazard and flammability testing group of electrotechnical materials and plastics — 3 methods
Laboratory locations
- LABORATORIUM BADAWCZE MATERIAŁÓW ELEKTROTECHNICZNYCH / ELECTROTECHNICAL MATERIALS TESTING LABORATORY — ul. M. Skłodowskiej-Curie 55/61; 50-369 Wrocław
- Zespół badania zagrożeń ogniowych i palności materiałów elektrotechnicznych oraz tworzyw sztucznych / Fire hazard and flammability testing group of electrotechn — ul. M. Skłodowskiej-Curie 55/61; 50-369 Wrocław
- Zespół badania materiałów i wyrobów elektrotechnicznych / Electrotechnical Materials and Products Research Group — ul. M. Skłodowskiej-Curie 55/61; 50-369 Wrocław
- Zespół Badania Izolatorów / Insulator Research Group — ul. M. Skłodowskiej-Curie 55/61; 50-369 Wrocław
Accreditation scope — test methods (87)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Electrotechnical Materials Testing Laboratory; Fire hazard and flammability testing group of electrotechnical materials and plastics | |||||
| 1 | Electrotechnical materials and products | Fire Hazard Resistance - Ignition and extinction time. - Flame height. - Ignition of the cotton pad. Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Glow Wire Method: | PN-EN 60695-2-10:2013-12 | PN-EN 60695-2-10:2022-07 | PN-EN 60695-2-11:2015-02 | PN-EN 60695-2-11:2022-07 | PN-EN 60695-2-12:2011 | PN-EN 60695-2-12:2011/A1:2014-10 | PN-EN 60695-2-12:2022-06 | PN-EN 60695-2-13:2011 | PN-EN 60695-2-13:2011/A1:2014-10 | PN-EN 60695-2-13:2022-05 | |
| 2 | Insulated cables, electric cables, fiber optic cables, heating cables | Resistance to vertical flame spread: Fire hazard with a 1 kW mixed flame. - Insulation charring range Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60332-1-1:2010 | PN-EN 60332-1-1:2010/A1:2016-02 | PN-EN 60332-1-2:2010 | PN-EN 60332-1-2:2010/A1:2016-02 | PN-EN 60332-1-2:2010/A11:2017-02 | PN-EN 60332-1-2:2010/A12:2021-05 | PN-EN 60332-2-2:2010 | PN-EN 60695-11-2:2017-11 | ||
| 3 | Solid electrotechnical insulating materials | Flammability category testing. / Flammability category testing. - Self-burn time - Glow time - Ignition of a cotton pad. Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Test methods using a 50 W flame test with the sample positioned horizontally and vertically. | PN-EN 60695-11-10:2014-02 | PN-EN 60695-11-10:2014-02/AC:2017-08 | |
| Electrotechnical Materials Testing Laboratory; Electrotechnical Materials and Products Research Group | |||||
| 4 | Electrotechnical materials and products | Mechanical properties: - proof yield strength (Rp) - apparent yield strength (Re) - tensile strength (Rm) - percentage elongation after fracture (A) - percentage reduction in area (Z) Range: force do 100 kN / up to 100 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Tensile test at room temperature | PN-EN ISO 6892-1:2020-05 | |
| 5 | Electrotechnical materials and products | Mechanical tensile, compressive, and flexural strength in the temperature range: (20 - 250) °C. (modulus of elasticity, compressive and tensile strength, lower and upper yield strength, elongation at break and yield strength) Force range: rozciąganie i ściskanie do 100 kN, zginanie do 10 kN / tension and compression up to 100 kN, bending up to 10 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Ring Stiffness | PN-EN ISO 604:2006 | PN-EN 60684-2:2011 | PN-EN ISO 527-1:2020-1 | PN-EN ISO 527-2:2012 | PN-EN ISO 527-3:2019-01 | PN-EN ISO 527-4:2023-10 | PN-EN ISO 527-5:2022-06 | PN-ISO 37:2007+AC1:2008 | PN-EN 1228:1999 | PN-EN ISO 178:2019-06 | |
| 6 | Electrotechnical materials and products | Tensile strength of coatings and insulation before and after aging of wires and cables Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Mechanical properties of wires | PN-EN IEC 60851-3:2024-05 | PN-EN 60811-501:2012 | PN-EN 60811-501:2012/A1:2019-01 | PN-EN 60811-501:2012/A2:2024-03 | PN-EN 60811-401:2012 | PN-EN 60811-401:2012/A1:2018-02 | |
| 7 | Electrotechnical materials and products | Breakdown voltage under normal conditions and as a function of temperature / Breakdown voltage under normal conditions and as a function of temperature in the range (20 -180) °C / (20 - 180) °C up to 25 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60243-1:2013-12 | ASTM D149-20 | PN-EN 60464-2:2006 | PN-EN 60464-2:2006/A1:2008 | PN EN IEC 60455-2: 2024-04 | PN-EN 60674-2:2017-04 | PN-EN 60674-2:2017-04/A1:2019-06 | PN-EN 60684-2:2011 | PN-EN 60454-2:2008 | PN-EN 60851-5:2008 | PN-EN 60851-5:2008/A1:2011 | PN-EN 60851-5:2008/A2:2020-06 | ||
| 8 | Electrotechnical materials and products | Resistance under normal conditions and as a function of temperature in the range of (20 - 180) °C Range: (0,0001 - 1015) Ω Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 62631-3-1:2023-10 | PN-EN IEC 62631-3-2:2024-07 | ASTM D257-14 (2021) e1 | PN-EN 62631-3-3:2016-08 | PN EN 60464-2:2006, p. 6.5.1 | PN-EN 60464-2:2006/A1:2008 | PN EN IEC 60455-2: 2024-04 | PN-EN 60684-2:2011 p. 21, p. 22 i p. 23 | PN-EN 60674-2:2017-04 | PN-EN 60674-2:2017-04/A1:2019-06 | PN-EN 60454-2:2008 | PN-EN 60851-5:2008 | PN-EN 60851-5:2008/A1:2011 | PN-EN 60851-5:2008/A2:2020-06 | PN-EN 62631-1:2011 | PN-EN 50395:2007, p. 5 | PN-EN 50395:2007/A1:2011 | ||
| 9 | Electrotechnical products, materials, components, plastics and protective coatings | Sunlight resistance Temp.: / temp.: +40 C lub 55 C / +40 C or 55 C Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Test Sa | PN-EN 60068-2-5:2011 | PN-EN ISO 4892-2:2013-06 | |
| 10 | Electrotechnical products, materials, components, plastics and protective coatings | Environmental testing: Climate tests, change of temperature Temperature range: (-65 - +90) C Relative air humidity range: (10 - 98)% Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60068-2-38:2010 | PN-EN 60068-2-38:2010/Ap1:2011 | PN-EN 60068-2-30:2008 | PN-EN 60068-2-2:2009 | PN-EN 60068-2-14:2009/Ap1:2016-07E | PN-EN 60068-2-14:2009 | PN-EN 60068-2-1:2009 | PN-EN 60068-2-78:2013-11 | ||
| 11 | Solid electrotechnical insulating materials | Volume, surface, and insulation resistivity at 23 C and in the temperature range: (–50 - +90) C, Measuring range: resistance – (10 - 1017) , resistivity – (10 - 1019) ·cm Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-88/E-04405 | IEC 60093:1980 | IEC 60167:1964 | ASTM D 257-99 | PN-EN 50395:2007 , p. 8 | PN-83/E-04160/73 | ||
| 12 | Electrotechnical materials, components and devices (insulating materials and insulating parts of products) | Electric strength of insulating materials: Tests at power frequencies Range: 50 Hz ; 125 kV / 50 Hz; 125 kV And direct voltage do 30 kV / up to 30 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60243-2:2014-07 | PN-K-92001:1997, p. 2.7 i p. 3.8 | PN-EN 60243-1:2013-12 | ||
| 13 | Insulating sticks and attachable devices under voltage up to 150 kV | Torsion strength Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60832-1: 2010, p. 5.5.2, i p. 5.5.6 | ||
| 14 | Insulating sticks and attachable devices under voltage up to 150 kV | Tension strength Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60832-1: 2010, p. 5.5.3 | ||
| 15 | Insulating sticks and attachable devices under voltage up to 150 kV | Bending strength Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60832-1: 2010, p. 5.5.5 | ||
| 16 | Insulating sticks and attachable devices under voltage up to 150 kV | Electrical test after water conditioning Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60832-1: 2010, p. 5.7.1 | ||
| 17 | Insulating sticks and attachable devices under voltage up to 150 kV | Resistance solvent (only for measuring stick) Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60832-1: 2010, p. 5.8.8.1 | ||
| 18 | Insulating sticks and attachable devices under voltage up to 150 kV | Resistance to abrasion (only for measuring stick) Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60832-1: 2010, p. 5.8.8.2 | ||
| 19 | Insulating sticks and attachable devices under voltage up to 150 kV | Electric strength test after abrasion test Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60832-1: 2010, p. 5.8.8.3 | ||
| 20 | Insulating tongs and grippers | Linear dimensions Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PB-5/LB/IEL/OTiME p. 9.3, wyd. 5 z 02.03.2011 | ||
| 21 | Insulating tongs and grippers | Electrical strength of tongs Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PB-5/LB/IEL/OTiME p. 9.9, wyd. 5 z 02.03.2011 | ||
| 22 | Electrical insulating matting | Electrical tests Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 61111:2009 p. 5.6. | ||
| 23 | Gloves of insulating material | Electrical tests with direct and alternating voltage / Live working Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60903:2006 p. 8.4 | ||
| 24 | Insulating overboots and shoes | Electrical strength and leakage current Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PB-13/LB/IEL/OTiME, wyd. 4 z 06.05.2008 | PN-EN 50321-1:2018-05 | ||
| 25 | Voltage detectors - Capacitive type to be used for voltages exceeding 1 kV AC from 0,23 kV to 52 kV | Threshold voltage / Threshold voltage Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN IEC 61243-1:2022-01 | ||
| 26 | Voltage detectors - Capacitive type to be used for voltages exceeding 1 kV AC from 0,23 kV to 52 kV | Time rating Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN IEC 61243-1:2022-01 | ||
| 27 | Voltage detectors - Capacitive type to be used for voltages exceeding 1 kV AC from 0,23 kV to 52 kV | Protection against bridging for indoor type/outdoor type voltage detector Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN IEC 61243-1:2022-01 | ||
| 28 | Voltage detectors - Capacitive type to be used for voltages exceeding 1 kV AC from 0,23 kV to 52 kV | Spark resistance Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN IEC 61243-1:2022-01 | ||
| 29 | Voltage detectors - Capacitive type to be used for voltages exceeding 1 kV AC from 0,23 kV to 52 kV | Drop resistance Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN IEC 61243-1:2022-01 | ||
| 30 | Voltage detectors - Capacitive type to be used for voltages exceeding 1 kV AC from 0,23 kV to 52 kV | Climatic dependence Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN IEC 61243-1:2022-01 | ||
| 31 | Voltage detectors - Capacitive type to be used for voltages exceeding 1 kV AC from 0,23 kV to 52 kV | Durability of markings Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN IEC 61243-1:2022-01 | ||
| 32 | Voltage detectors - Capacitive type to be used for voltages exceeding 1 kV AC from 0,23 kV to 52 kV | Testing of the influence of interfering factors on clear indication / Clear Indication: influence of in-phase interference field, opposite interference field and interference voltage Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN IEC 61243-1:2022-01 | ||
| Electrotechnical Materials Testing Laboratory; Insulator Research Group | |||||
| 33 | Ceramic and glass insulating materials | Bulk density and open (apparent) porosity Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Hydrostatic method of weighting | PN-EN 60672-2:2002 | PN-EN 60672-3:2002 | |
| 34 | Ceramic and glass insulating materials | Mechanical flexural strength Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Triple point bending test | PN-EN 60672-1:2010 | PN-EN 60672-2:2002 pkt. 6 | PN-EN 60672-3:2002 | |
| 35 | Ceramic and glass insulating materials | Resistance to cracking Range to 250 oC / 250 °C Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Resistance to thermal shock test | PN-EN 60672-2:2002 | PN-EN 60672-3:2002 | |
| 36 | Ceramic and glass insulating materials | Electric strength / Electric strength Range: (5 - 125) kV / 5 – 125 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Measurements of the breakdown voltage | PN-EN 60672-2:2002 | PN-EN 60672-3:2002 | PN-EN 60243-1:2013-12 | |
| 37 | Ceramic and glass insulating materials | Withstand voltage / Withstand voltage, Range: (5 - 125) kV / 5 – 125 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Test by withstand voltage. | PN-EN 60672-2:2002 | PN-EN 60672-3:2002 | PN-EN 60243-1:2013-12 | |
| 38 | Ceramic and glass insulating materials | Volume resistivity. Range: (106 -1016) Ω·m / 106 – 1016 Ω·m Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60672-2:2002 | PN-EN 60672-3:2002 | ||
| 39 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Hardness test range: do 100 ShA / to 100ShA Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Shore hardness test Shore A method | PN-EN 62217:2013-06 pkt. 9.3.1. | PN-EN 61462:2009 | PN-EN ISO 868:2005 | |
| 40 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Tracking and erosion test – 1000 h salt fog test Range Up do 30 kV / to 30 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 61109:2010 | PN-EN 62217:2013-06 | PN-EN 61462:2009 | PN-EN 61952:2010 | ||
| 41 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Discontinuities / Porosity test (Dye penetration test) Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Dye penetration test / Dye penetration test | PN-EN 61109:2010 | PN-EN 62217:2013-06 | PN-EN 61462:2009 | PN-EN 61952:2010 | PN-EN ISO 3452-1:2021-12 | |
| 42 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Water absorption/water penetration / Water diffusion test Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Water diffusion test | PN-EN 61109:2010 | PN-EN 62217:2013-06 | PN-EN 62231:2008 | PN-EN 61462:2009 | PN-EN 61952:2010 | |
| 43 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Thermal-mechanical pre-stressing – tensile strength / Thermal-mechanical pre-stress tensile load: do 300 kN / to 300 kN - bending load Range: do 20 kN / to 20 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 61109:2010 | PN-EN 62231:2008 | PN-EN 61462:2009 | PN-EN 61952:2010 | ||
| 44 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Pre-stressing by water immersion / Water immersion pre-stressing Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 62217:2013-06 | ||
| 45 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Tightness between boundary surfaces test Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Dye penetration test / Dye penetration test | PN-EN 61109:2010 | PN-EN ISO 3452-1:2013-08 | |
| 46 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Verification of the dimensions / Verification of the dimensions Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 61109:2010 | PN-EN 62231:2008 | PN-EN 61952:2010 | ||
| 47 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Thickness of the coating Range: do 900 µm / to 900 μm Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Galvanizing test | PN-EN 61109:2010 | PN-EN 62231:2008 | PN-EN 61952:2010 | PN-EN ISO 2178:2016-06 | |
| 48 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Sudden load release range: do 300 kN / to 300 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Sudden load release test | PN-EN 61109:2010 | |
| 49 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Mechanical strength Tensile load test range: do 300 kN / to 300 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Determination of the average breaking tensile load | PN-EN 61109:2010 | |
| 50 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Tensile load test (96h test) range: do 300 kN / to 300 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Multi-hour tensile load test (96h test) | PN-EN 61109:2010 | |
| 51 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Tensile strength / Tensile strength range: do 300 kN / to 300 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Mechanical tensile load test / Mechanical tensile load test | PN-EN 61109:2010 pkt. 13.1 | PN-EN 62231:2008 | PN-EN 60660:2002 | PN-EN 61952:2010 | |
| 52 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Test for mechanical bending strength range: do 25 kN / to 25 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Test for mechanical bending strength | PN-EN 62231:2008 pkt. 9.3.1. | PN-EN 61462:2009 | PN-EN 60660:2002 | PN-EN 61952:2010 | |
| 53 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Compressive strength test Range: do 300 kN / to 300 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Compressive strength test | PN-EN 62231:2008 | |
| 54 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Bending strength / Bending Strength Range: do 25 kN / up to 25 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Mechanical bending strength test as a function of temperature | PN-EN 60660:2002 | |
| 55 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Mechanical strength Range: do 25 kN / up to 25 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Test for mechanical bending strength as a function of temperature | PN-EN 60660:2002 | |
| 56 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Reference dry power frequency test range: (5 - 125) kV / 5 – 125 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Reference dry power frequency test | PN-EN 62217:2013-06 | PN-EN 61462:2009 | PN-EN 60060-1:2011 | |
| 57 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Reference wet power frequency test range: (5 - 125) kV / 5 – 125 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Reference wet power frequency test | PN-EN 61109:2010 | PN-EN 60060-1:2011 | PN-EN 62231:2008 | PN-EN 61952:2010 | |
| 58 | Composite, polymeric and organic materials insulators for nominal voltages greater then 1kV | Impulse voltage test range: (10 - 700) kV / 10 – 700 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Impulse voltage test | PN-EN 62217:2013-06 | PN-EN 61109:2010 | PN-EN 60060-1:2011 | PN-EN 61462:2009 | PN-EN 62231:2008 | PN-EN 61952:2010 | |
| 59 | Insulators for overhead lines with a nominal voltage above 1kV. Traction ceramic insulators | Verification of the dimensions / Verification of the dimensions Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60383-1:2005 | PN-EN 60383-1:2024-04 | ||
| 60 | Insulators for overhead lines with a nominal voltage above 1kV. Traction ceramic insulators | Electric strength. Range: (10 - 700) kV / 10 – 700 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Lightning impulse withstand voltage tests / Lightning impulse withstand voltage tests | PN-EN 60383-1:2005 | PN-EN 60060-1:2011 | PN-EN 60383-1:2024-04 | |
| 61 | Insulators for overhead lines with a nominal voltage above 1kV. Traction ceramic insulators | Electric strength. Range: (5 - 125) kV / 5 – 125 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Nominal power-frequency withstand voltage, dry and wet test, 50 Hz | PN-EN 60383-1:2005 | PN-EN 60060-1:2011 | PN-EN 60383-1:2024-04 | |
| 62 | Insulators for overhead lines with a nominal voltage above 1kV. Traction ceramic insulators | Electric strength. Range: (10 - 700) kV / 10 – 700 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Impulse voltage puncture test in air. | PN EN 61211:2005, | PN-EN 60383-1:2005 | PN-EN 60060-1:2011 | PN-EN 60383-1:2024-04 | |
| 63 | Insulators for overhead lines with a nominal voltage above 1kV. Traction ceramic insulators | Resistance to thermal shock / Resistance to thermal shock Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60383-1:2005 | PN-EN 60383-1:2024-04 | ||
| 64 | Insulators for overhead lines with a nominal voltage above 1kV. Traction ceramic insulators | Tensile strength / Tensile strength Range: do 300 kN / to 300 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Thermomechanical test | PN-EN 60383-1:2005 | PN-EN 60383-1:2024-04 | |
| 65 | Insulators for overhead lines with a nominal voltage above 1kV. Traction ceramic insulators | Mechanical strength test - method of the test for line and line post insulators. - method of the test for long rod line insulators. Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60383-1:2005 | PN-EN 60383-1:2024-04 | ||
| 66 | Insulators for overhead lines with a nominal voltage above 1kV. Traction ceramic insulators | Thickness of the coating. Range: do 900 µm / to 900 μm Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Test of galvanization / Test of galvanization. | PN-EN 60383-1:2005, | PN-EN ISO 2178:2016-06 | PN-EN 60383-1:2024-04 | |
| 67 | Indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V | Verification of the dimensions / Verification of the dimensions Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60168:1999 | ||
| 68 | Indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V | Electric strength. Range: (10 - 700) kV / 10 – 700 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Lightning impulse withstand voltage tests / Lightning impulse withstand voltage tests | PN-EN 60168:1999 | PN-EN 60060-1:2011 | |
| 69 | Indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V | Electric strength. Range: (5 - 125) kV / 5 – 125 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Nominal power-frequency withstand voltage, dry test, 50 Hz | PN-EN 60168:1999 | PN-EN 60060-1:2011 | |
| 70 | Indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V | Electric strength. Range: (5 - 125) kV / 5 – 125 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Nominal power-frequency withstand voltage, wet test, 50 Hz | PN-EN 60168:1999 | PN-EN 60060-1:2011 | |
| 71 | Indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V | Resistance to thermal shock / Resistance to thermal shock Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-EN 60168:1999 | ||
| 72 | Indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V | Bending strength / Bending strength. Range: do 25 kN / to 25 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Mechanical bending strength test. | PN-EN 60168:1999 | |
| 73 | Indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V | Thickness of the coating Range: do 900 µm / to 900 μm Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Test of galvanization / Test of galvanization. | PN-EN 60168:1999 | PN-EN ISO 2178:2016-06 | |
| 74 | Low voltage power insulators – Ceramic insulators | Verification of the dimensions / Verification of the dimensions Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-E-91030-1:1996 | ||
| 75 | Low voltage power insulators – Ceramic insulators | Verification of the weight Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-E-91030-1:1996 | ||
| 76 | Low voltage power insulators – Ceramic insulators | Resistance to thermal shock test Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
PN-E-91030-1:1996 | ||
| 77 | Low voltage power insulators – Ceramic insulators | Electric strength / Electric strength Range: (5 - 125) kV / 5 – 125 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Nominal power-frequency withstand voltage, dry test, 50 Hz | PN-E-91030-1:1996 | PN-EN 60060-1:2011 | |
| 78 | Low voltage power insulators – Ceramic insulators | Electric strength. Range: (5 - 125) kV / 5 – 125 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Nominal power-frequency withstand voltage, wet test, 50 Hz | PN-E-91030-1:1996 | PN-EN 60060-1:2011 | |
| 79 | Low voltage power insulators – Ceramic insulators | Tensile strength. Bending strength. Range: do 25 kN / to 25 kN. Range: do 300 kN / to 300 kN. Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Mechanical bending strength test. Mechanical tensile strength test. | PN-E-91030-1:1996 | |
| 80 | Low voltage power insulators – Ceramic insulators | Cracks, inclusions, defects. Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Inspection of the fracture surface of ceramic body | PN-E-91030-1:1996 | PN-E-91030-3:1997 | PN-E-91030-4:1997 | |
| 81 | Insulated bushings for alternating voltages above 1000V | Electric strength. Range: (10 - 700) kV / 10 – 700 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Lightning impulse withstand voltage tests | PN-EN 60137:2018-02 | PN-EN 60060-1:2011 | |
| 82 | Insulated bushings for alternating voltages above 1000V | Electric strength. Range: (5 - 125) kV / 5 – 125 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Nominal power-frequency withstand voltage, dry or wet test, 50 Hz | PN-EN 60137:2018-02 | PN-EN 60060-1:2011 | |
| 83 | Insulated bushings for alternating voltages above 1000V | Bending strength / Bending strength. Range: do 25 kN / to 25 kN. Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Mechanical bending strength test (only horizontal). | PN-EN 60137:2018-02 | |
| 84 | Spark-free metal oxide surge arresters for AC networks | Bending strength / Bending Strength Range: do 25 kN / up to 25 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Bending Resistance Test | PN-EN 60099-4:2015-01 | |
| 85 | Spark-free metal oxide surge arresters for AC networks | Tensile Strength Range: do 300 kN / up to 300 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Tensile Strength Test | PN-EN 60099-4:2015-01 | |
| 86 | Spark-free metal oxide surge arresters for AC networks | Mechanical resistance Range: do 20 kN / up to 20 kN Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Thermomechanical stress | PN-EN 60099-4:2015-01 | |
| 87 | Spark-free metal oxide surge arresters for AC networks | Electrical Strength Range: do 30 kV / up to 30 kV Material / product tested (calculated), Type of activity/ parameter/ characteristic tested (calculated), Reference documents (calculated) |
Aging in a Live Salt Spray Chamber | PN-EN 60099-4:2015-01 | |
Reference standards (117)
ASTM D 257-99
ASTM D149-20
ASTM D257-14 (2021) e1
IEC 60093:1980
IEC 60167:1964
PB-13/LB/IEL/OTiME, wyd. 4 z 06.05.2008
PB-5/LB/IEL/OTiME p. 9.3, wyd. 5 z 02.03.2011
PB-5/LB/IEL/OTiME p. 9.9, wyd. 5 z 02.03.2011
PN EN 60464-2:2006, p. 6.5.1
PN EN 61211:2005,
PN EN IEC 60455-2: 2024-04
PN-83/E-04160/73
PN-88/E-04405
PN-E-91030-1:1996
PN-E-91030-3:1997
PN-E-91030-4:1997
PN-EN 1228:1999
PN-EN 50321-1:2018-05
PN-EN 50395:2007 , p. 8
PN-EN 50395:2007, p. 5
PN-EN 50395:2007/A1:2011
PN-EN 60060-1:2011
PN-EN 60068-2-14:2009
PN-EN 60068-2-14:2009/Ap1:2016-07E
PN-EN 60068-2-1:2009
PN-EN 60068-2-2:2009
PN-EN 60068-2-30:2008
PN-EN 60068-2-38:2010
PN-EN 60068-2-38:2010/Ap1:2011
PN-EN 60068-2-5:2011
PN-EN 60068-2-78:2013-11
PN-EN 60099-4:2015-01
PN-EN 60137:2018-02
PN-EN 60168:1999
PN-EN 60243-1:2013-12
PN-EN 60243-2:2014-07
PN-EN 60332-1-1:2010
PN-EN 60332-1-1:2010/A1:2016-02
PN-EN 60332-1-2:2010
PN-EN 60332-1-2:2010/A11:2017-02
PN-EN 60332-1-2:2010/A12:2021-05
PN-EN 60332-1-2:2010/A1:2016-02
PN-EN 60332-2-2:2010
PN-EN 60383-1:2005
PN-EN 60383-1:2005,
PN-EN 60383-1:2024-04
PN-EN 60454-2:2008
PN-EN 60464-2:2006
PN-EN 60464-2:2006/A1:2008
PN-EN 60660:2002
PN-EN 60672-1:2010
PN-EN 60672-2:2002
PN-EN 60672-2:2002 pkt. 6
PN-EN 60672-3:2002
PN-EN 60674-2:2017-04
PN-EN 60674-2:2017-04/A1:2019-06
PN-EN 60684-2:2011
PN-EN 60684-2:2011 p. 21, p. 22 i p. 23
PN-EN 60695-11-10:2014-02
PN-EN 60695-11-10:2014-02/AC:2017-08
PN-EN 60695-11-2:2017-11
PN-EN 60695-2-10:2013-12
PN-EN 60695-2-10:2022-07
PN-EN 60695-2-11:2015-02
PN-EN 60695-2-11:2022-07
PN-EN 60695-2-12:2011
PN-EN 60695-2-12:2011/A1:2014-10
PN-EN 60695-2-12:2022-06
PN-EN 60695-2-13:2011
PN-EN 60695-2-13:2011/A1:2014-10
PN-EN 60695-2-13:2022-05
PN-EN 60811-401:2012
PN-EN 60811-401:2012/A1:2018-02
PN-EN 60811-501:2012
PN-EN 60811-501:2012/A1:2019-01
PN-EN 60811-501:2012/A2:2024-03
PN-EN 60832-1: 2010, p. 5.5.2, i p. 5.5.6
PN-EN 60832-1: 2010, p. 5.5.3
PN-EN 60832-1: 2010, p. 5.5.5
PN-EN 60832-1: 2010, p. 5.7.1
PN-EN 60832-1: 2010, p. 5.8.8.1
PN-EN 60832-1: 2010, p. 5.8.8.2
PN-EN 60832-1: 2010, p. 5.8.8.3
PN-EN 60851-5:2008
PN-EN 60851-5:2008/A1:2011
PN-EN 60851-5:2008/A2:2020-06
PN-EN 60903:2006 p. 8.4
PN-EN 61109:2010
PN-EN 61109:2010 pkt. 13.1
PN-EN 61111:2009 p. 5.6.
PN-EN 61462:2009
PN-EN 61952:2010
PN-EN 62217:2013-06
PN-EN 62217:2013-06 pkt. 9.3.1.
PN-EN 62231:2008
PN-EN 62231:2008 pkt. 9.3.1.
PN-EN 62631-1:2011
PN-EN 62631-3-1:2023-10
PN-EN 62631-3-3:2016-08
PN-EN IEC 60851-3:2024-05
PN-EN IEC 61243-1:2022-01
PN-EN IEC 62631-3-2:2024-07
PN-EN ISO 178:2019-06
PN-EN ISO 2178:2016-06
PN-EN ISO 3452-1:2013-08
PN-EN ISO 3452-1:2021-12
PN-EN ISO 4892-2:2013-06
PN-EN ISO 527-1:2020-1
PN-EN ISO 527-2:2012
PN-EN ISO 527-3:2019-01
PN-EN ISO 527-4:2023-10
PN-EN ISO 527-5:2022-06
PN-EN ISO 604:2006
PN-EN ISO 6892-1:2020-05
PN-EN ISO 868:2005
PN-ISO 37:2007+AC1:2008
PN-K-92001:1997, p. 2.7 i p. 3.8