🇨🇿 SVUM Testing s.r.o. PL

ČIA 2427 • Čelákovice, Czech Republic • 8 calibration items

Metrology & calibration

SVUM Testing s.r.o. is a calibration laboratory accredited by ČIA under number 2427 (Čelákovice, Czech Republic). Its accreditation scope covers 8 calibration items in the following areas: Metrology & calibration. Calibrated items include: Dial indicators, Digital calipers, Digital indicators, Digital micrometer callipers. Most frequently used calibration principles: Measurement using gauge blocks, Measurement on an indicator calibration device (micrometer head), Comparative measurement with a reference type S thermocouple in a v….

At a glance

Accreditation number: ČIA 2427
Calibration items in scope: 8
Types of calibrated items: 8
Calibration principles used: 4
City: Čelákovice, Czech Republic
Valid until: 28-07-2028

Accreditation number: 2427
Accreditation body: ČIA
Address: Tovární 2053, 250 88 Čelákovice
City: Čelákovice, Czech Republic
Division: Laboratorium wzorcujące
Valid until: 28-07-2028

What this laboratory calibrates (8)

Dial indicators — 1 calibration item
Digital calipers — 1 calibration item
Digital indicators — 1 calibration item
Digital micrometer callipers — 1 calibration item
LVDT linear displacement transducers — 1 calibration item
Type S thermocouple sensor — 1 calibration item
Vernier / analogue calipers — 1 calibration item
Vernier / analogue micrometer callipers — 1 calibration item

Calibration principles (4)

Measurement using gauge blocks — 4 calibration items
Measurement on an indicator calibration device (micrometer head) — 2 calibration items
Comparative measurement with a reference type S thermocouple in a vertical calibration furnace — 1 calibration item
Measurement on a linear transducer calibration device (micrometer head) — 1 calibration item

Certificate information

Certificate date: 28.07.2025

Accreditation scope — calibration items (8)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Digital micrometer callipers	Calibration – length 0 mm to 150 mm · CMC 1 µm CMC for the field of measured quantity: Length	Measurement using gauge blocks	KP 02-01
2	Vernier / analogue micrometer callipers	Calibration – length 0 mm to 150 mm · CMC 6 µm CMC for the field of measured quantity: Length	Measurement using gauge blocks	KP 02-01
3	Digital calipers	Calibration – length 0 mm to 300 mm · CMC 12 µm CMC for the field of measured quantity: Length	Measurement using gauge blocks	KP 02-02
4	Vernier / analogue calipers	Calibration – length 0 mm to 300 mm · CMC 13 µm CMC for the field of measured quantity: Length	Measurement using gauge blocks	KP 02-02
5	Digital indicators	Calibration – length 0 mm to 12 mm · CMC 2 µm CMC for the field of measured quantity: Length	Measurement on an indicator calibration device (micrometer head)	KP 02-03
6	Dial indicators	Calibration – length 0 mm to 10 mm · CMC 6 µm CMC for the field of measured quantity: Length	Measurement on an indicator calibration device (micrometer head)	KP 02-03
7	LVDT linear displacement transducers	Calibration – length 0 mm to 8 mm · CMC 10 µm CMC for the field of measured quantity: Length	Measurement on a linear transducer calibration device (micrometer head)	KP 02-06
8	Type S thermocouple sensor	Calibration – temperature 420 °C to 1000 °C · CMC 2,6 °C 1000 °C to 1150 °C · CMC 2,9 °C CMC for the field of measured quantity: Temperature	Comparative measurement with a reference type S thermocouple in a vertical calibration furnace	KP 01-01

Reference standards (5)

KP 01-01

KP 02-01

KP 02-02

KP 02-03

KP 02-06

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2427