🇨🇿 DEOM s.r.o. PL

ČIA 2407 • Praha 5, Czech Republic • 4 calibration items

Metrology & calibration

DEOM s.r.o. is a calibration laboratory accredited by ČIA under number 2407 (Praha 5, Czech Republic). Its accreditation scope covers 4 calibration items in the following areas: Metrology & calibration. Calibrated items include: Coordinate measuring machine – optical, Multisensor equipment of coordinate measuring machine – optical. Most frequently used calibration principles: Measurement using a parallel gauge block, Measurement using parallel gauge blocks, Measurement with a calibration sphere.

At a glance

Accreditation number: ČIA 2407
Calibration items in scope: 4
Types of calibrated items: 2
Calibration principles used: 4
City: Praha 5, Czech Republic
Valid until: 28-06-2027

Accreditation number: 2407
Accreditation body: ČIA
Address: Jinonická 804/80, Košíře, 158 00 Praha 5
City: Praha 5, Czech Republic
Division: Laboratorium wzorcujące
Valid until: 28-06-2027

What this laboratory calibrates (2)

Coordinate measuring machine – optical — 2 calibration items
Multisensor equipment of coordinate measuring machine – optical — 2 calibration items

Calibration principles (4)

Measurement using a parallel gauge block — 1 calibration item
Measurement using parallel gauge blocks — 1 calibration item
Measurement with a calibration sphere — 1 calibration item
Measuring with a glass ruler — 1 calibration item

Certificate information

Certificate date: 27.01.2025

Accreditation scope — calibration items (4)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Coordinate measuring machine – optical	Calibration – length axis X and Y — 0 mm to 2500 mm · CMC (L/660 + 0,6) µm CMC for the field of measured quantity: Length	Measuring with a glass ruler	KP1
2	Coordinate measuring machine – optical	Calibration – length Z-axis — 0 mm to 400 mm · CMC (L/420 + 1,0) µm CMC for the field of measured quantity: Length	Measurement using parallel gauge blocks	KP1
3	Multisensor equipment of coordinate measuring machine – optical	Calibration – length Touch probe — 0 mm to 12 mm · CMC 0,4 µm CMC for the field of measured quantity: Length	Measurement with a calibration sphere	KP2
4	Multisensor equipment of coordinate measuring machine – optical	Calibration – length Optical distance sensor — 0 mm to 24 mm · CMC 0,1 µm CMC for the field of measured quantity: Length	Measurement using a parallel gauge block	KP2

Reference standards (2)

KP1

KP2

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2407