🇨🇿 Carl Zeiss spol. s r.o. PL
Metrology & calibration
Carl Zeiss spol. s r.o. is a calibration laboratory accredited by ČIA under number 2398 (Praha 5, Czech Republic). Its accreditation scope covers 3 calibration items in the following areas: Metrology & calibration. Calibrated items include: Carl Zeiss coordinate measuring machines with computed tomography s…, Carl Zeiss optical 3D systems, Coordinate measuring machines Carl Zeiss with contacting probing. Most frequently used calibration principles: PSA reference standard measurement (ISO 10360-13), Reference standard measurement METROTOM Check (VDI/VDE 2630 Blatt 1.3), Step gauge and calibration ball measurement (ČSN EN ISO 10360-2, ČS….
At a glance
- Accreditation number: ČIA 2398
- Calibration items in scope: 3
- Types of calibrated items: 3
- Calibration principles used: 3
- City: Praha 5, Czech Republic
- Valid until: 25-11-2030
- Accreditation number
- 2398
- Accreditation body
- ČIA
- Address
- Radlická 3201/14, Smíchov, 150 00 Praha 5
- City
- Praha 5, Czech Republic
- Division
- Laboratorium wzorcujące Carl Zeiss IQS
- Valid until
- 25-11-2030
What this laboratory calibrates (3)
- Carl Zeiss coordinate measuring machines with computed tomography sensors — 1 calibration item
- Carl Zeiss optical 3D systems — 1 calibration item
- Coordinate measuring machines Carl Zeiss with contacting probing — 1 calibration item
Calibration principles (3)
- PSA reference standard measurement (ISO 10360-13) — 1 calibration item
- Reference standard measurement METROTOM Check (VDI/VDE 2630 Blatt 1.3) — 1 calibration item
- Step gauge and calibration ball measurement (ČSN EN ISO 10360-2, ČSN EN ISO 10360-3, ČSN EN ISO 10360-4, VDI/VDE 2617 Blatt 2.1, VDI/VDE 2617 Blatt 2.2, VDI/VDE 2617 Blatt 4) — 1 calibration item
Laboratory locations
- Carl Zeiss spol. s r.o. (main site) — Radlická 3201/14, Smíchov, 150 00 Praha 5
- Praga - Radlická (nie wykonuje się wzorcowań) — Radlická 3201/14, Smíchov, 150 00 Praha 5
- Nupaky — Komerční 524, Nupaky, 251 01 Praha - Východ
Certificate information
- Certificate date
- 25.11.2025
Accreditation scope — calibration items (3)
| No. | Calibrated quantity / subject of calibration | Nominal range / parameters / CMC | Calibration principle | Calibration procedure | |
|---|---|---|---|---|---|
| Nupaky | |||||
| 1 | Coordinate measuring machines Carl Zeiss with contacting probing | Calibration – length 0 mm to 3030 mm · CMC (0,23·L + 0,06) µm CMC for the field of measured quantity: Length |
Step gauge and calibration ball measurement (ČSN EN ISO 10360-2, ČSN EN ISO 10360-3, ČSN EN ISO 10360-4, VDI/VDE 2617 Blatt 2.1, VDI/VDE 2617 Blatt 2.2, VDI/VDE 2617 Blatt 4) | KP001-ZEISS-10360, KP002-ZEISS-2617 | |
| 2 | Carl Zeiss coordinate measuring machines with computed tomography sensors | Calibration – length ball centre distance U (SD) — 0 mm to 870 mm · CMC 0,31 µm ball diameter U (PS) — 0 mm to 330 mm · CMC 0,48 µm shape deviation U (PF) — 0 mm to 3 mm · CMC 0,44 µm total length error U (EL) — 0 mm to 900 mm · CMC 0,78 µm CMC for the field of measured quantity: Length |
Reference standard measurement METROTOM Check (VDI/VDE 2630 Blatt 1.3) | KP003-ZEISS-2630 | |
| 3 | Carl Zeiss optical 3D systems | Calibration – length determination of ball centre distance deviation U (SD) — 0 mm to 1000 mm · CMC 0,16 µm determination of length error deviation U (E) — 0 mm to 1000 mm · CMC 0,27 µm determination of dimension measurement deviation U (PS) — 0 mm to 60 mm · CMC 0,15 µm determination of dimension measurement deviation U (PF) — 0 mm to 60 mm · CMC 0,19 µm CMC for the field of measured quantity: Length |
PSA reference standard measurement (ISO 10360-13) | KP004-ZEISS-10360 | |
Reference standards (4)
KP001-ZEISS-10360
KP002-ZEISS-2617
KP003-ZEISS-2630
KP004-ZEISS-10360