🇨🇿 BMT Medical Technology s.r.o. PL

ČIA 2386 • Brno, Czech Republic • 4 calibration items

Metrology & calibration

BMT Medical Technology s.r.o. is a calibration laboratory accredited by ČIA under number 2386 (Brno, Czech Republic). Its accreditation scope covers 4 calibration items in the following areas: Metrology & calibration. Calibrated items include: Electronic thermometers and temperature measuring chains, Deformation pressure gauges, Electronic pressure gauges and pressure measuring chains. Most frequently used calibration principles: Comparison with a standard digital manometer, Comparison with a standard digital thermometer in a furnace, Comparison with a standard digital thermometer in a liquid bath.

At a glance

Accreditation number: ČIA 2386
Calibration items in scope: 4
Types of calibrated items: 3
Calibration principles used: 3
City: Brno, Czech Republic
Valid until: 18-05-2028

Accreditation number: 2386
Accreditation body: ČIA
Address: Cejl 157/50, Zábrdovice, 602 00 Brno
City: Brno, Czech Republic
Division: Laboratorium wzorcujące
Valid until: 18-05-2028

What this laboratory calibrates (3)

Electronic thermometers and temperature measuring chains — 2 calibration items
Deformation pressure gauges — 1 calibration item
Electronic pressure gauges and pressure measuring chains — 1 calibration item

Calibration principles (3)

Comparison with a standard digital manometer — 2 calibration items
Comparison with a standard digital thermometer in a furnace — 1 calibration item
Comparison with a standard digital thermometer in a liquid bath — 1 calibration item

Certificate information

Certificate date: 18.09.2024

Accreditation scope — calibration items (4)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Electronic pressure gauges and pressure measuring chains	Calibration – pressure absolute pressure — 7 kPa to 400 kPa · CMC 0,3 kPa CMC for the field of measured quantity: Pressure	Comparison with a standard digital manometer	QPP 11-16, QPP 11-19
2	Deformation pressure gauges	Calibration – pressure gauge pressure — -0,1 MPa to 0,5 MPa · CMC 1,0 kPa gauge pressure — 0,5 MPa to 1,6 MPa · CMC 5,0 kPa CMC for the field of measured quantity: Pressure	Comparison with a standard digital manometer	QPP 11-23
3	Electronic thermometers and temperature measuring chains	Calibration – temperature 0 °C to 180 °C · CMC 0,2 °C 180 °C to 250 °C · CMC 0,3 °C CMC for the field of measured quantity: Temperature	Comparison with a standard digital thermometer in a liquid bath	QPP 11-16, QPP 11-18
4	Electronic thermometers and temperature measuring chains	Calibration – temperature 250 °C to 300 °C · CMC 0,4 °C CMC for the field of measured quantity: Temperature	Comparison with a standard digital thermometer in a furnace	QPP 11-16, QPP 11-18

Reference standards (4)

QPP 11-16

QPP 11-18

QPP 11-19

QPP 11-23

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2386