🇨🇿 ÚJV Řež, a. s. PL

ČIA 2340 • Husinec, Czech Republic • 11 calibration items

Metrology & calibration

ÚJV Řež, a. s. is a calibration laboratory accredited by ČIA under number 2340 (Husinec, Czech Republic). Its accreditation scope covers 11 calibration items in the following areas: Metrology & calibration. Calibrated items include: Digital thermometers and measuring chains, Thermocouples, Deformation and digital pressure gauges, pressure transducers and p…, Barometric pressure. Most frequently used calibration principles: Comparison with a standard digital pressure gauge, Comparison with a standard resistance thermometer immersed in liqui…, Comparison with a standard resistance thermometer in a calibration….

At a glance

Accreditation number: ČIA 2340
Calibration items in scope: 11
Types of calibrated items: 6
Calibration principles used: 6
City: Husinec, Czech Republic
Valid until: 12-03-2031

Accreditation number: 2340
Accreditation body: ČIA
Address: Hlavní 130, Řež, 250 68 Husinec
City: Husinec, Czech Republic
Division: Laboratorium wzorcujące
Valid until: 12-03-2031

What this laboratory calibrates (6)

Digital thermometers and measuring chains — 3 calibration items
Thermocouples — 3 calibration items
Deformation and digital pressure gauges, pressure transducers and pressure measuring chains — 2 calibration items
Barometric pressure — 1 calibration item
Glass thermometers — 1 calibration item
Temperature measuring chains including a temperature chamber — 1 calibration item

Calibration principles (6)

Comparison with a standard digital pressure gauge — 3 calibration items
Comparison with a standard resistance thermometer immersed in liquid nitrogen — 2 calibration items
Comparison with a standard resistance thermometer in a calibration furnace — 2 calibration items
Comparison with a standard thermocouple in a calibration furnace — 2 calibration items
Comparison with a standard resistance thermometer in a micro-bath — 1 calibration item
Comparison with a standard thermocouple — 1 calibration item

Certificate information

Certificate date: 12.03.2026

Accreditation scope — calibration items (11)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Deformation and digital pressure gauges, pressure transducers and pressure measuring chains	Calibration – pressure medium: gas; gauge pressure — -90 kPa to -1 kPa · CMC 100 Pa medium: gas; gauge pressure — -1 kPa to 1 kPa · CMC 2,5 Pa medium: gas; gauge pressure — 1 kPa to 6,9 kPa · CMC 21 Pa medium: gas; gauge pressure — 6,9 kPa to 200 kPa · CMC 0,04 % + 30 Pa medium: gas; gauge pressure — 0,2 MPa to 2,0 MPa · CMC 1,1 kPa medium: gas; gauge pressure — 2,0 MPa to 4 MPa · CMC 6,9 kPa CMC for the field of measured quantity: Pressure	Comparison with a standard digital pressure gauge	PP 2306 086, PP 2306 088
2	Deformation and digital pressure gauges, pressure transducers and pressure measuring chains	Calibration – pressure medium: liquid; gauge pressure — 0 MPa to 13,8 MPa · CMC 6,9 kPa medium: liquid; gauge pressure — 13,8 MPa to 70 MPa · CMC 0,04 % + 7 kPa CMC for the field of measured quantity: Pressure	Comparison with a standard digital pressure gauge	PP 2306 086, PP 2306 088
3	Barometric pressure	Calibration – pressure 70 kPa to 110 kPa · CMC 50 Pa CMC for the field of measured quantity: Pressure	Comparison with a standard digital pressure gauge	PP 2306 088
4	Glass thermometers	Calibration – temperature -30 °C to 0 °C · CMC 0,06 °C 0 °C to 50 °C · CMC 0,08 °C 50 °C to 140 °C · CMC 0,11 °C CMC for the field of measured quantity: Temperature	Comparison with a standard resistance thermometer in a micro-bath	PP 2306 083
5	Thermocouples	Calibration – temperature -196 °C · CMC 0,4 °C CMC for the field of measured quantity: Temperature	Comparison with a standard resistance thermometer immersed in liquid nitrogen	PP 2306 087
6	Thermocouples	Calibration – temperature -30 °C to 250 °C · CMC 0,4 °C 250 °C to 450 °C · CMC 0,6 °C 450 °C to 650 °C · CMC 0,8 °C CMC for the field of measured quantity: Temperature	Comparison with a standard resistance thermometer in a calibration furnace	PP 2306 087
7	Thermocouples	Calibration – temperature 650 °C to 850 °C · CMC 1,3 °C 850 °C to 1100 °C · CMC 2,5 °C CMC for the field of measured quantity: Temperature	Comparison with a standard thermocouple in a calibration furnace	PP 2306 087
8	Digital thermometers and measuring chains	Calibration – temperature -196 °C · CMC 0,15 °C CMC for the field of measured quantity: Temperature	Comparison with a standard resistance thermometer immersed in liquid nitrogen	PP 2306 082, PP 2306 087
9	Digital thermometers and measuring chains	Calibration – temperature -30 °C to 0 °C · CMC 0,06 °C 0 °C to 50 °C · CMC 0,13 °C 50 °C to 150 °C · CMC 0,20 °C 150 °C to 250 °C · CMC 0,27 °C 250 °C to 450 °C · CMC 0,47 °C 450 °C to 550 °C · CMC 0,57 °C 550 °C to 650 °C · CMC 0,67 °C CMC for the field of measured quantity: Temperature	Comparison with a standard resistance thermometer in a calibration furnace	PP 2306 082, PP 2306 087
10	Digital thermometers and measuring chains	Calibration – temperature 650 °C to 850 °C · CMC 1,3 °C 850 °C to 1100 °C · CMC 2,5 °C CMC for the field of measured quantity: Temperature	Comparison with a standard thermocouple in a calibration furnace	PP 2306 082, PP 2306 087
11	Temperature measuring chains including a temperature chamber	Calibration – temperature -190 °C to -100 °C · CMC 1,3 °C -100 °C to 320 °C · CMC 1,2 °C CMC for the field of measured quantity: Temperature	Comparison with a standard thermocouple	PP 2306 087

Reference standards (5)

PP 2306 082

PP 2306 083

PP 2306 086

PP 2306 087

PP 2306 088

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2340