🇨🇿 PEMIT, s.r.o. PL

ČIA 2337 • Paskov, Czech Republic • 14 calibration items

Metrology & calibration

PEMIT, s.r.o. is a calibration laboratory accredited by ČIA under number 2337 (Paskov, Czech Republic). Its accreditation scope covers 14 calibration items in the following areas: Metrology & calibration. Calibrated items include: Direct-reading thermometers, Temperature sensors with transmitter, Deformation and electromechanical pressure gauges, Resistance temperature sensors. Most frequently used calibration principles: Comparison with a standard resistance sensor in a block furnace, Comparison with a standard resistance sensor in a liquid bath, Comparison with a type S thermocouple in a horizontal furnace.

At a glance

Accreditation number: ČIA 2337
Calibration items in scope: 14
Types of calibrated items: 7
Calibration principles used: 6
City: Paskov, Czech Republic
Valid until: 04-04-2030

Accreditation number: 2337
Accreditation body: ČIA
Address: Místecká 845, 739 21 Paskov
City: Paskov, Czech Republic
Division: Metrologia – laboratorium wzorcujące
Valid until: 04-04-2030

What this laboratory calibrates (7)

Direct-reading thermometers — 3 calibration items
Temperature sensors with transmitter — 3 calibration items
Deformation and electromechanical pressure gauges — 2 calibration items
Resistance temperature sensors — 2 calibration items
Thermoelectric temperature sensors — 2 calibration items
Calibration of output signals of resistance sensors — 1 calibration item
Simulation of output signals of thermoelectric temperature sensors — 1 calibration item

Calibration principles (6)

Comparison with a standard resistance sensor in a block furnace — 4 calibration items
Comparison with a standard resistance sensor in a liquid bath — 3 calibration items
Comparison with a type S thermocouple in a horizontal furnace — 3 calibration items
Simulation with a Beamex MC5 multifunction calibrator — 2 calibration items
Comparison with a Beamex MC5 digital pressure gauge — 1 calibration item
Comparison with a Fluke PPC4 digital calibrator — 1 calibration item

Certificate information

Certificate date: 04.04.2025

Accreditation scope — calibration items (14)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Deformation and electromechanical pressure gauges	Calibration – pressure Gauge pressure; gas — -90 kPa to -67 kPa · CMC 3 Pa Gauge pressure; gas — -67 kPa to -15 kPa · CMC 9,2·10⁻⁵ Gauge pressure; gas — -15 kPa to 15 kPa · CMC 6,9·10⁻⁵ + 0,3 Pa Gauge pressure; gas — 15 kPa to 100 kPa · CMC 5,8·10⁻⁵ + 1,8 Pa Gauge pressure; gas — 100 kPa to 600 kPa · CMC 30 Pa Gauge pressure; gas — 600 kPa to 2 000 kPa · CMC 9,2·10⁻⁵ Absolute pressure; gas — 0 kPa to 33 kPa · CMC 1,7 Pa Absolute pressure; gas — 33 kPa to 110 kPa · CMC 9,2·10⁻⁵ Absolute pressure; gas — 110 kPa to 600 kPa · CMC 30 Pa Absolute pressure; gas — 600 kPa to 2 000 kPa · CMC 9,2·10⁻⁵ Absolute pressure; gas — 2 000 kPa to 10 000 kPa · CMC 5,0·10⁻⁴ + 1,5 kPa CMC for the field of measured quantity: Pressure	Comparison with a Fluke PPC4 digital calibrator	P01, P02, P03
2	Deformation and electromechanical pressure gauges	Calibration – pressure 2 000 kPa to 10 000 kPa · CMC 5,0·10⁻⁴ + 1,5 kPa Gauge pressure, absolute pressure; water — 2 MPa to 16 MPa · CMC 3,5·10⁻⁴ + 2,1 kPa Gauge pressure, absolute pressure; water — 16 MPa to 25 MPa · CMC 3,5·10⁻⁴ + 4,5 kPa Gauge pressure, absolute pressure; water — 25 MPa to 60 MPa · CMC 3,5·10⁻⁴ + 9,5 kPa Barometric pressure — 80 kPa to 120 kPa · CMC 58 Pa CMC for the field of measured quantity: Pressure	Comparison with a Beamex MC5 digital pressure gauge	P01, P02, P03
3	Resistance temperature sensors	Calibration – temperature 0 °C · CMC 0,06 °C -20 °C to 90 °C · CMC 0,07 °C 90 °C to 200 °C · CMC 0,09 °C CMC for the field of measured quantity: Temperature	Comparison with a standard resistance sensor in a liquid bath	T01
4	Resistance temperature sensors	Calibration – temperature 200 °C to 400 °C · CMC 0,4 °C 400 °C to 600 °C · CMC 0,6 °C CMC for the field of measured quantity: Temperature	Comparison with a standard resistance sensor in a block furnace	T01
5	Thermoelectric temperature sensors	Calibration – temperature -20 °C to 90 °C · CMC 0,5 °C 90 °C to 600 °C · CMC 0,6 °C CMC for the field of measured quantity: Temperature	Comparison with a standard resistance sensor in a block furnace	T02
6	Thermoelectric temperature sensors	Calibration – temperature 600 °C to 1100 °C · CMC 1,6 °C CMC for the field of measured quantity: Temperature	Comparison with a type S thermocouple in a horizontal furnace	T02
7	Direct-reading thermometers	Calibration – temperature -20 °C to 90 °C · CMC 0,07 °C 90 °C to 200 °C · CMC 0,09 °C CMC for the field of measured quantity: Temperature	Comparison with a standard resistance sensor in a liquid bath	T04
8	Direct-reading thermometers	Calibration – temperature 200 °C to 400 °C · CMC 0,4 °C 400 °C to 600 °C · CMC 0,6 °C CMC for the field of measured quantity: Temperature	Comparison with a standard resistance sensor in a block furnace	T04
9	Direct-reading thermometers	Calibration – temperature 600 °C to 1100 °C · CMC 1,6 °C CMC for the field of measured quantity: Temperature	Comparison with a type S thermocouple in a horizontal furnace	T04
10	Temperature sensors with transmitter	Calibration – temperature -20 °C to 90 °C · CMC 0,07 °C 90 °C to 200 °C · CMC 0,09 °C CMC for the field of measured quantity: Temperature	Comparison with a standard resistance sensor in a liquid bath	T05
11	Temperature sensors with transmitter	Calibration – temperature 200 °C to 400 °C · CMC 0,4 °C 400 °C to 600 °C · CMC 0,6 °C CMC for the field of measured quantity: Temperature	Comparison with a standard resistance sensor in a block furnace	T05
12	Temperature sensors with transmitter	Calibration – temperature 600 °C to 1100 °C · CMC 1,6 °C CMC for the field of measured quantity: Temperature	Comparison with a type S thermocouple in a horizontal furnace	T05
13	Simulation of output signals of thermoelectric temperature sensors	Calibration – temperature TC type B — 20 °C to 500 °C · CMC 2,1 °C TC type B — 500 °C to 1820 °C · CMC 0,9 °C TC type R — -50 °C to 150 °C · CMC 1,1 °C TC type R — 150 °C to 1768 °C · CMC 0,6 °C TC type S — -50 °C to 0 °C · CMC 1,1 °C TC type S — 0 °C to 1768 °C · CMC 0,8 °C TC type J — -200 °C to 0 °C · CMC 0,3 °C TC type J — 0 °C to 1200 °C · CMC 0,4 °C TC type K — -200 °C to 1000 °C · CMC 0,4 °C TC type K — 1000 °C to 1372 °C · CMC 0,5 °C TC type N — -200 °C to -100 °C · CMC 0,5 °C TC type N — -100 °C to 750 °C · CMC 0,4 °C TC type N — 750 °C to 1300 °C · CMC 0,5 °C CMC for the field of measured quantity: Temperature	Simulation with a Beamex MC5 multifunction calibrator	R01
14	Calibration of output signals of resistance sensors	Calibration – temperature Pt 100, Pt 1000 — -200 °C to 0 °C · CMC 0,12 °C Pt 100, Pt 1000 — 0 °C to 850 °C · CMC 2,8·10⁻⁴ + 0,12 °C CMC for the field of measured quantity: Temperature	Simulation with a Beamex MC5 multifunction calibrator	R01

Reference standards (8)

P01

P02

P03

R01

T01

T02

T04

T05

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2337