Sign up
LabCoda / Accreditation scopes / 🇨🇿 Czech Republic / 2318

🇨🇿 PRIMA BILAVČÍK, s.r.o. PL

ČIA 2318 • Uherský Brod, Czech Republic • 106 calibration items

Metrology & calibration

PRIMA BILAVČÍK, s.r.o. is a calibration laboratory accredited by ČIA under number 2318 (Uherský Brod, Czech Republic). Its accreditation scope covers 106 calibration items in the following areas: Metrology & calibration. Calibrated items include: Angles, Balances with non-automatic function, Direct-indicating thermometers, Parallel gauge blocks - 4th order. Most frequently used calibration principles: Comparison with parallel gauge blocks, Direct measurement by a reference multimeter, Direct measurement on a reference calibrator.

At a glance

  • Accreditation number: ČIA 2318
  • Calibration items in scope: 106
  • Types of calibrated items: 68
  • Calibration principles used: 62
  • City: Uherský Brod, Czech Republic
  • Valid until: 01-12-2026
Accreditation number
2318
Accreditation body
ČIA
Address
9. května 1182, 688 01 Uherský Brod
City
Uherský Brod, Czech Republic
Division
Calibration laboratory
Valid until
01-12-2026

What this laboratory calibrates (68)

Calibration principles (62)

Laboratory sections (3)

Laboratory locations

Certificate information

Certificate date
04.12.2025

Accreditation scope — calibration items (106)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Uherský Brod
1 Slide gauges Calibration – length
0 mm to 2000 mm · CMC (15·L +15) μm resol. 0.01 mm — 1000 mm to 2000 mm · CMC (15·L +30) μm
CMC for the field of measured quantity: Length
 Comparison with parallel gauge blocks KP-PB-01
2 Micrometers Calibration – length
from 0 mm to 1000 mm · CMC (15·L +1,5) μm
CMC for the field of measured quantity: Length
 Comparison with parallel gauge blocks KP-PB-02
3 Length gauges Calibration – length
0 mm to 1040 mm · CMC (1,2·L +0,15) μm
CMC for the field of measured quantity: Length
 Direct or comparative measurement by a distance meter KP-PB-04
4 Parallel gauge blocks - 3rd order Calibration – length
from 0,5 mm to 100 mm · CMC (1·L +0,1) μm
CMC for the field of measured quantity: Length
 Comparison with parallel gauge blocks KP-PB-07
5 Parallel gauge blocks - 4th order Calibration – length
from 0,5 mm to 100 mm · CMC (2·L +0,2) μm
CMC for the field of measured quantity: Length
 Comparison with parallel gauge blocks KP-PB-07
6 Parallel gauge blocks - 4th order Calibration – length
from 100 mm to 1000 mm · CMC (1,2·L +0,17) μm
CMC for the field of measured quantity: Length
 Comparison with parallel gauge blocks KP-PB-07
7 Height gauges Calibration – length
from 0 mm to 1000 mm · CMC (1,2·L +1) μm
CMC for the field of measured quantity: Length
 Comparison with parallel gauge blocks KP-PB-12
8 Graduated scales, tape measures, measuring tapes Calibration – length
from 0 mm to 50 m · CMC (0,2·n) mm
CMC for the field of measured quantity: Length
 Direct measurement on a measuring track, comparative measurement with reference tape measure and ruler KP-PB-14
9 Length gauges Calibration – length
from 0 mm to 300 mm · CMC (0,8·L +0,07) μm
CMC for the field of measured quantity: Length
 Comparison with parallel gauge blocks KP-PB-16
10 Gauges of length and geometric shapes by a laser interferometer Calibration – length
from 0 m to 20 m · CMC (0,8·L +0,03) μm
CMC for the field of measured quantity: Length
 Direct measurement by a laser interferometer KP-PB-19
11 Gauges of length, shape, geometric positions, angles with a laser interferometer and laser tracker Calibration – length
0,2 m to 15 m · CMC (0,3·L +0,2) μm
CMC for the field of measured quantity: Length
 Direct measurement by a LaserTracker laser interferometer KP-PB-19
12 Angles Calibration – length
from 0 mm to 1000 mm · CMC 4 μm
CMC for the field of measured quantity: Length
 Direct measurement using a coordinate measuring machine KP-PB-26
13 Angles Calibration – length
from 0 mm to 1000 mm · CMC 6 μm
CMC for the field of measured quantity: Length
 Comparison with a perpendicularity standard and parallel gauge blocks KP-PB-26
14 Internal gauges Calibration – length
from 0 mm to 300 mm · CMC (3·L +2) μm
CMC for the field of measured quantity: Length
 Comparison with setting rings KP-PB-20
15 Contact, optical, multisensor coordinate measuring machines Calibration – length
0 mm to 1600 mm · CMC (0,6·L +0,2) μm
CMC for the field of measured quantity: Length
 Comparison with steel parallels and graduated scale KP-PB-21
16 Coordinate measuring machines – manual mobile hinged arms Calibration – length
0 mm to 3700 mm · CMC (2·L +20) μm
CMC for the field of measured quantity: Length
 Comparison using step gauges KP-PB-21
17 Coordinate measuring machines – proximity scanners Calibration – length
from 0 mm to 200 mm · CMC 3 μm 200 mm to 1500 mm · CMC 20 μm
CMC for the field of measured quantity: Length
 Comparison with a measuring gauge KP-PB-21
18 Coordinate measuring machines Calibration – length
from 0 m to 30 m · CMC 50 μm
CMC for the field of measured quantity: Length
 Direct measurement by a LaserTracker laser interferometer KP-PB-21
19 Coordinate measuring machines – tomographs Calibration – length
from 0 mm to 500 mm · CMC 3 μm
CMC for the field of measured quantity: Length
 Comparison with a spherical standard KP-PB-21
20 Surface roughness standards Calibration – length
0,01 μm to 100 μm · CMC (0,06·L) μm
CMC for the field of measured quantity: Length
 Direct measurement by a roughness meter KP-PB-23
21 Roughness meters Calibration – length
0,01 μm to 100 μm · CMC (0,035·L) μm
CMC for the field of measured quantity: Length
 Comparison with a roughness standard KP-PB-24
22 Ring gauges Calibration – length
roundness — 0 μm to 2000 μm · CMC 0,1 μm
CMC for the field of measured quantity: Length
 Comparison with a reference sphere KP-PB-31
23 Ring gauges Calibration – length
straightness — 0 μm to 2000 μm · CMC 0,11 μm
CMC for the field of measured quantity: Length
 Comparison with a flat glass KP-PB-31
24 Profilometers Calibration – length
from 0 mm to 600 mm · CMC (1,0·L +1,2) μm
CMC for the field of measured quantity: Length
 Comparison with a contour standard KP-PB-25
25 Gauges of length and geometric quantities Calibration – length
from 0 mm to 1000 mm · CMC (3·L +0,5) μm
CMC for the field of measured quantity: Length
 Direct measurement by a coordinate measuring machine KP-PB-27
26 Gauges of length and geometric quantities Calibration – length
from 0 mm to 300 mm · CMC (1,2·L +0,2) μm
CMC for the field of measured quantity: Length
 Direct measurement by a ring gauge KP-PB-27
27 3D length gauges Calibration – length
0 mm to 3200 mm · CMC 43 μm
CMC for the field of measured quantity: Length
 Direct measurement by a mobile hinged arm KP-PB-27
28 Laser distance meters Calibration – length
from 0 m to 20 m · CMC 0,9 mm
CMC for the field of measured quantity: Length
 Direct measurement by a LaserTracker laser interferometer, comparison with a length standard KP-PB-28
29 Surface layer thickness gauges Calibration – length
0 mm to 2,0 mm · CMC (20·L +1,3) μm
CMC for the field of measured quantity: Length
 Comparative measurement by a thickness standard KP-PB-29
30 Angle gauges Calibration – plane angle
from 0 ° to 360 ° · CMC 3´
CMC for the field of measured quantity: Plane angle
 Comparison with angle gauges KP-PB-15
31 Builder's levels Calibration – plane angle
-3 ° to 3 ° · CMC 0,7 mm/m
CMC for the field of measured quantity: Plane angle
 Direct measurement on an index head, comparison with an angle gauge KP-PB-36
32 Clinometers Calibration – plane angle
from -180 ° to 180 ° · CMC 0,15°
CMC for the field of measured quantity: Plane angle
 Direct measurement on an index head, comparison with an angle gauge KP-PB-36
33 Rotation angle of torque wrench Calibration – plane angle
0 ° to 270 ° · CMC 0,32°
CMC for the field of measured quantity: Plane angle
 Direct measurement by an angle sensor KP-PB-40
34 Torque / torque wrenches, torque screwdrivers Calibration – force
from 0,2 N·m to 1000 N·m · CMC 0,4 %
CMC for the field of measured quantity: Force
 Direct measurement by a torque sensor KP-PB-40
35 Mechanical pressure gauges and electromechanical manometers Calibration – pressure
positive gauge pressure, gas — -100 kPa to -2 kPa · CMC 0,025 % + 10 Pa positive gauge pressure, gas — -2 kPa to 2 kPa · CMC 0,1 % + 1 digit positive gauge pressure, gas — 2 kPa to 10 kPa · CMC 0,025 % + 1 Pa positive gauge pressure, gas — 10 kPa to 100 kPa · CMC 0,025 % + 10 Pa positive gauge pressure, gas — 0,1 MPa to 2 MPa · CMC 0,025 % + 0,2 kPa positive gauge pressure, gas — 2 MPa to 6 MPa · CMC 0,025 % + 0,6 kPa positive gauge pressure, gas — 6 MPa to 7 MPa · CMC 1,4 kPa positive gauge pressure, liquid — 0 MPa to 6 MPa · CMC 0,025 % +0,6 kPa positive gauge pressure, liquid — 6 MPa to 16 MPa · CMC 0,025 % +1,6 kPa positive gauge pressure, liquid — 16 MPa to 60 MPa · CMC 0,025 % + 6 kPa positive gauge pressure, liquid — 60 MPa to 100 MPa · CMC 25 kPa positive gauge pressure, liquid — 100 MPa to 250 MPa · CMC 250 kPa absolute pressure, gas — 70 kPa to 100 kPa · CMC 0,025 % + 60 Pa absolute pressure, gas — 0,1 MPa to 2 MPa · CMC 0,025 % + 0,3 kPa absolute pressure, gas — 2 MPa to 6 MPa · CMC 0,025 % + 0,7 kPa absolute pressure, gas — 6 MPa to 7 MPa · CMC 1,5 kPa absolute pressure, liquid — 0,1 MPa to 6 MPa · CMC 0,025 % +0,7 kPa absolute pressure, liquid — 6 MPa to 16 MPa · CMC 0,025 % +1,7 kPa absolute pressure, liquid — 16 MPa to 60 MPa · CMC 0,025 % + 6,1 kPa barometric pressure, gas — 70 kPa to 120 kPa · CMC 0,05 kPa
CMC for the field of measured quantity: Pressure
 Comparison with a reference pressure gauge KP-PB-55 KP-PB-56
Mladá Boleslav
36 Slide gauges Calibration – length
0 mm to 2000 mm · CMC (15·L +15) μm resol. 0.01 mm — 1000 mm to 2000 mm · CMC (15·L +30) μm
CMC for the field of measured quantity: Length
 Comparison with parallel gauge blocks KP-PB-01
37 Micrometers Calibration – length
from 0 mm to 1000 mm · CMC (15·L +1,5) μm
CMC for the field of measured quantity: Length
 Comparison with parallel gauge blocks KP-PB-02
38 Length gauges Calibration – length
0 mm to 1040 mm · CMC (1,2·L +0,15) μm
CMC for the field of measured quantity: Length
 Direct or comparative measurement by a distance meter KP-PB-04
39 Parallel gauge blocks - 4th order Calibration – length
from 0,5 mm to 100 mm · CMC (2·L +0,2) μm
CMC for the field of measured quantity: Length
 Comparison with parallel gauge blocks KP-PB-07
40 Parallel gauge blocks - 4th order Calibration – length
from 100 mm to 500 mm · CMC (2·L +0,2) μm
CMC for the field of measured quantity: Length
 Comparison with parallel gauge blocks KP-PB-07
41 Graduated scales, tape measures, measuring tapes Calibration – length
from 0 mm to 50 m · CMC (0,2·n) mm
CMC for the field of measured quantity: Length
 Direct measurement on a measuring track, comparative measurement with reference tape measure and ruler KP-PB-14
42 Angles Calibration – length
from 0 mm to 1000 mm · CMC 4 μm
CMC for the field of measured quantity: Length
 Direct measurement using a coordinate measuring machine KP-PB-26
43 Angles Calibration – length
from 0 mm to 1000 mm · CMC 6 μm
CMC for the field of measured quantity: Length
 Comparison with a perpendicularity standard and parallel gauge blocks KP-PB-26
44 Internal gauges Calibration – length
from 0 mm to 300 mm · CMC (3·L +2) μm
CMC for the field of measured quantity: Length
 Comparison with setting rings KP-PB-20
45 Gauges of length and geometric quantities Calibration – length
from 0 mm to 1000 mm · CMC (3·L +0,5) μm
CMC for the field of measured quantity: Length
 Direct measurement by a coordinate measuring machine KP-PB-27
46 Angle gauges Calibration – plane angle
from 0 ° to 360 ° · CMC 3´
CMC for the field of measured quantity: Plane angle
 Comparison with angle gauges KP-PB-15
47 Rotation angle of torque wrench Calibration – plane angle
0 ° to 270 ° · CMC 0,32°
CMC for the field of measured quantity: Plane angle
 Direct measurement by an angle sensor KP-PB-40
48 Torque / torque wrenches, torque screwdrivers Calibration – force
from 0,2 N·m to 1000 N·m · CMC 0,4 %
CMC for the field of measured quantity: Force
 Direct measurement by a torque sensor KP-PB-40
49 Direct-indicating thermometers Calibration – temperature
-100 °C to -60 °C · CMC 0,04 °C -60 °C to 0 °C · CMC 0,04 °C from 0 °C to 50 °C · CMC 0,03 °C 50 °C to 230 °C · CMC 0,04 °C 230 °C to 660 °C · CMC 0,05 °C
CMC for the field of measured quantity: Temperature
 Comparison using a reference resistance thermometer KP-PB-51
50 Direct-indicating thermometers Calibration – temperature
660 °C to 700 °C · CMC 1,1 °C 700 °C to 1000 °C · CMC 1,2 °C from 1000 °C to 1100 °C · CMC 1,2 °C from 1100 °C to 1200 °C · CMC 1,4 °C from 1200 °C to 1500 °C · CMC 2,4 °C 1500 °C to 1600 °C · CMC 2,9 °C
CMC for the field of measured quantity: Temperature
 Comparison with a reference thermocouple KP-PB-51
51 Relative humidity Calibration – physicochemical quantities
(10 to 60) °C — 10 % RH to 40 % RH · CMC 0,9 % RH (10 to 60) °C — 40 % RH to 70 % RH · CMC 1,0 % RH (10 to 60) °C — 70 % RH to 80 % RH · CMC 1,1 % RH (10 to 60) °C — 80 % RH to 90 % RH · CMC 1,2 % RH (10 to 60) °C — 90 % RH to 95 % RH · CMC 1,6 % RH
CMC for the field of measured quantity: Physicochemical quantities
 Comparison with a humidity standard KP-PB-99
Uherský Brod II
52 Balances with non-automatic function Calibration – mass
from 1 mg to 200 mg · CMC 0,018 mg from 200 mg to 1 g · CMC 0,026 mg from 1 g to 2 g · CMC 0,032 mg from 2 g to 10 g · CMC 0,050 mg from 10 g to 20 g · CMC 0,064 mg from 20 g to 50 g · CMC 0,078 mg from 50 g to 100 g · CMC 0,13 mg 100 g to 5 kg · CMC 1,3·10⁻⁶
CMC for the field of measured quantity: Mass
 Loading using a class E2 reference weight (acc. to OIML R111-1:2004) KP-PB-71
53 Balances with non-automatic function Calibration – mass
5 kg to 55 kg · CMC 6·10⁻⁶
CMC for the field of measured quantity: Mass
 Loading using a class F1 reference weight (acc. to OIML R111-1:2004) KP-PB-71
54 Balances with non-automatic function Calibration – mass
55 kg to 150 kg · CMC 2,2·10⁻⁵
CMC for the field of measured quantity: Mass
 Loading using a class F2 reference weight (acc. to OIML R111-1:2004) KP-PB-71
55 Balances with non-automatic function Calibration – mass
150 kg to 1 t · CMC 7,3·10⁻⁵
CMC for the field of measured quantity: Mass
 Loading using a class M1 reference weight (acc. to OIML R111-1:2004) KP-PB-71
56 Conventional mass of weights and bodies Calibration – mass
from 1 mg to 5 mg · CMC 0,0020 mg 10 mg · CMC 0,0022 mg 20 mg · CMC 0,0023 mg 50 mg · CMC 0,0029 mg 100 mg · CMC 0,0035 mg 200 mg · CMC 0,0043 mg 500 mg · CMC 0,0053 mg 1 g · CMC 0,0064 mg 2 g · CMC 0,0083 mg 5 g · CMC 0,011 mg 10 g · CMC 0,013 mg 20 g · CMC 0,017 mg 50 g · CMC 0,024 mg 100 g · CMC 0,032 mg 200 g · CMC 0,062 mg 500 g · CMC 0,16 mg 1 kg · CMC 0,32 mg 2 kg · CMC 0,62 mg 5 kg · CMC 1,6 mg 10 kg · CMC 14 mg 20 kg · CMC 24 mg
CMC for the field of measured quantity: Mass
 Comparison with a reference weight (acc. to OIML R111-1:2004) on reference scales and comparators KP-PB-75
57 Force / Working force-proving instruments Calibration – force
Tension, pressure — 0,1 N to 200 N · CMC 0,05 %
CMC for the field of measured quantity: Force
 Suspension by means of load bodies KP-PB-41
58 Force / Working force-proving instruments Calibration – force
Tension, pressure — 10 N to 1000 N · CMC 0,07 % Tension, pressure — 1000 N to 2500 N · CMC 0,13 % FS
CMC for the field of measured quantity: Force
 Direct measurement by a force sensor KP-PB-41
59 Direct-indicating thermometers Calibration – temperature
-100 °C to -60 °C · CMC 0,04 °C -60 °C to 0 °C · CMC 0,04 °C from 0 °C to 50 °C · CMC 0,03 °C 50 °C to 230 °C · CMC 0,04 °C 230 °C to 660 °C · CMC 0,05 °C
CMC for the field of measured quantity: Temperature
 Comparison using a reference resistance thermometer KP-PB-51
60 Direct-indicating thermometers Calibration – temperature
660 °C to 700 °C · CMC 1,1 °C 700 °C to 1000 °C · CMC 1,2 °C from 1000 °C to 1100 °C · CMC 1,2 °C from 1100 °C to 1200 °C · CMC 1,4 °C from 1200 °C to 1500 °C · CMC 2,4 °C 1500 °C to 1600 °C · CMC 2,9 °C
CMC for the field of measured quantity: Temperature
 Comparison with a reference thermocouple KP-PB-51
61 Direct indicating thermometers – temperature measuring chains – externally Calibration – temperature
-100 °C to 230 °C · CMC 0,2 °C 230 °C to 660 °C · CMC 0,3 °C
CMC for the field of measured quantity: Temperature
 Comparison using a reference resistance thermometer KP-PB-51
62 Direct indicating thermometers – temperature measuring chains – externally Calibration – temperature
660 °C to 700 °C · CMC 1,1 °C 700 °C to 1000 °C · CMC 2,1 °C from 1000 °C to 1100 °C · CMC 2,2 °C from 1100 °C to 1200 °C · CMC 2,3 °C from 1200 °C to 1500 °C · CMC 2,9 °C 1500 °C to 1600 °C · CMC 3,4 °C
CMC for the field of measured quantity: Temperature
 Comparison with a reference thermocouple KP-PB-51
63 Temperature – contactless thermometers Calibration – temperature
from -20 °C to 0 °C · CMC 1,2 °C from 0 °C to 50 °C · CMC 1,3 °C from 50 °C to 100 °C · CMC 1,4 °C from 100 °C to 200 °C · CMC 1,9 °C from 200 °C to 300 °C · CMC 2,8 °C from 300 °C to 400 °C · CMC 3,4 °C from 400 °C to 500 °C · CMC 3,6 °C from 500 °C to 600 °C · CMC 3,9 °C from 600 °C to 800 °C · CMC 5,0 °C from 800 °C to 1000 °C · CMC 6,1 °C from 1000 °C to 1200 °C · CMC 7,3 °C
CMC for the field of measured quantity: Temperature
 Comparison with a reference black body KP-PB-53
64 Temperature calibrators, temperature indicators Calibration – temperature
TC-J — -210 °C to 0 °C · CMC 0,15 °C TC-J — 0 °C to 1200 °C · CMC 0,08 °C TC-K — -270 °C to 0 °C · CMC 0,18 °C TC-K — 0 °C to 500 °C · CMC 0,09 °C TC-K — 500 °C to 1372 °C · CMC 0,12 °C TC-T — -270 °C to 0 °C · CMC 0,17 °C TC-T — 0 °C to 400 °C · CMC 0,05 °C TC-R — -50 °C to 250 °C · CMC 0,70 °C TC-R — 250 °C to 1768 °C · CMC 0,24 °C TC-S — -50 °C to 250 °C · CMC 0,64 °C TC-S — 250 °C to 1768 °C · CMC 0,24 °C TC-B — 250 °C to 1820 °C · CMC 0,41 °C TC-N — -270 °C to 0 °C · CMC 0,27 °C TC-N — 0 °C to 1300 °C · CMC 0,10 °C TC-E — -270 °C to 0 °C · CMC 0,12 °C TC-E — 0 °C to 1000 °C · CMC 0,07 °C
CMC for the field of measured quantity: Temperature
 Direct generation of equivalent DC voltage for TC – without cold junction compensation KP-PB-122
65 Temperature calibrators, temperature indicators Calibration – temperature
TC-J — -210 °C to 0 °C · CMC 0,08 °C TC-J — 0 °C to 1200 °C · CMC 0,07 °C TC-K — -270 °C to 0 °C · CMC 0,09 °C TC-K — 0 °C to 500 °C · CMC 0,06 °C TC-K — 500 °C to 1372 °C · CMC 0,07 °C TC-T — -270 °C to 0 °C · CMC 0,09 °C TC-T — 0 °C to 400 °C · CMC 0,03 °C TC-R — -50 °C to 250 °C · CMC 0,32 °C TC-R — 250 °C to 1064 °C · CMC 0,09 °C TC-R — 1064 °C to 1768 °C · CMC 0,10 °C TC-S — -50 °C to 250 °C · CMC 0,29 °C TC-S — 250 °C to 1064 °C · CMC 0,10 °C TC-S — 1064 °C to 1768 °C · CMC 0,12 °C TC-B — 250 °C to 700 °C · CMC 0,18 °C TC-B — 700 °C to 1820 °C · CMC 0,11 °C TC-N — -270 °C to 0 °C · CMC 0,12 °C TC-N — 0 °C to 600 °C · CMC 0,04 °C TC-N — 600 °C to 1300 °C · CMC 0,04 °C TC-E — -270 °C to 0 °C · CMC 0,05 °C TC-E — 0 °C to 1000 °C · CMC 0,03 °C
CMC for the field of measured quantity: Temperature
 Direct measurement of equivalent DC voltage for TC – without cold junction compensation KP-PB-122
66 Temperature calibrators, temperature indicators Calibration – temperature
Pt 100 (3850) — -100 °C · CMC 0,03 °C Pt 100 (3850) — 0 °C · CMC 0,03 °C Pt 100 (3850) — 30 °C · CMC 0,04 °C Pt 100 (3850) — 60 °C · CMC 0,04 °C Pt 100 (3850) — 100 °C · CMC 0,04 °C Pt 100 (3850) — 200 °C · CMC 0,05 °C Pt 100 (3850) — 400 °C · CMC 0,07 °C Pt 100 (3850) — 800 °C · CMC 0,13 °C Pt 100 (3850) — -200 °C to 0 °C · CMC 0,15 °C Pt 100 (3850) — 0 °C to 800 °C · CMC 0,43 °C Pt 500 (3850) — -200 °C to 260 °C · CMC 0,12 °C Pt 500 (3850) — 260 °C to 800 °C · CMC 0,45 °C Pt 1000 (3850) — -200 °C to 0 °C · CMC 0,05 °C Pt 1000 (3850) — 0 °C to 800 °C · CMC 0,45 °C Ni 100 (6180) — -60 °C to 0 °C · CMC 0,12 °C Ni 100 (6180) — 0 °C · CMC 0,02 °C Ni 100 (6180) — 0 °C to 250 °C · CMC 0,21 °C Ni 120 (6720) — -80 °C to 0 °C · CMC 0,08 °C Ni 120 (6720) — 0 °C to 260 °C · CMC 0,11 °C Ni 1000 (6180) — -50 °C to 0 °C · CMC 0,03 °C Ni 1000 (6180) — 0 °C to 200 °C · CMC 0,15 °C
CMC for the field of measured quantity: Temperature
 Direct generation of equivalent resistance for RTD KP-PB-122
67 Temperature calibrators, temperature indicators Calibration – temperature
Pt 100 (385) — -200 °C to 800 °C · CMC 0,03 °C Pt 500 (385) — -200 °C to 800 °C · CMC 0,10 °C Pt 1000 (385) — -200 °C to 800 °C · CMC 0,16 °C Ni 100 (6180) — -60 °C to 250 °C · CMC 0,02 °C Ni 120 (6720) — -60 °C to 250 °C · CMC 0,02 °C Ni 1000 (6180) — -60 °C to 200 °C · CMC 0,02 °C
CMC for the field of measured quantity: Temperature
 Direct measurement of equivalent resistance for RTD KP-PB-122
68 DC voltage / DC voltage sources Calibration – electrical quantities
from 0 mV to 120 mV · CMC 8,0 µV/V + 0,2 µV from 0,12 V to 1,2 V · CMC 5,7 µV/V + 0,61 µV from 1,2 V to 12 V · CMC 5,5 µV/V + 6,1 µV from 12 V to 120 V · CMC 8,1 µV/V + 81 µV 120 V to 1050 V · CMC 8,1 µV/V + 1,2 mV
CMC for the field of measured quantity: Electrical quantities
 Direct measurement by a reference multimeter KP-PB-110
69 DC voltage / DC voltage sources Calibration – electrical quantities
1,05 kV to 10 kV · CMC 1,2 %
CMC for the field of measured quantity: Electrical quantities
 Measurement with a reference multimeter with HV probe KP-PB-110
70 DC voltage / DC voltage meters Calibration – electrical quantities
from 0 mV to 200 mV · CMC 15 µV/V + 2,3 µV from 0,2 V to 2 V · CMC 8,8 µV/V + 2,6 µV from 2 V to 20 V · CMC 7,5 µV/V + 25 µV from 20 V to 200 V · CMC 13 µV/V + 0,28 mV from 200 V to 1020 V · CMC 13 µV/V + 1,8 mV
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a reference calibrator or comparison with a reference multimeter KP-PB-110
71 DC current / DC current sources Calibration – electrical quantities
from 0 µA to 120 µA · CMC 23 µA/A + 0,42 nA from 0,12 mA to 1,2 mA · CMC 14 µA/A + 4,1 nA from 1,2 mA to 12 mA · CMC 16 µA/A + 41 nA from 12 mA to 120 mA · CMC 42 µA/A + 0,61 µA 0,12 A to 1,2 A · CMC 0,020 % + 13 µA 1,2 A to 10 A · CMC 0,048 % + 0,35 mA from 10 A to 30 A · CMC 0,064 % + 4,4 mA
CMC for the field of measured quantity: Electrical quantities
 Direct measurement by a reference multimeter KP-PB-111
72 DC current / DC current sources Calibration – electrical quantities
from 10 A to 30 A · CMC 0,031 % 30 A to 70 A · CMC 0,083 % 70 A to 200 A · CMC 0,064 % 200 to 300 A · CMC 0,060 %
CMC for the field of measured quantity: Electrical quantities
 Indirect measurement using a reference shunt and multimeter. KP-PB-111
73 DC current / DC current sources Calibration – electrical quantities
0 A to 200 A · CMC 1,2 % +0,5 A from 200 A to 2000 A · CMC 1,0 % +4,5 A
CMC for the field of measured quantity: Electrical quantities
 Direct measurement by a reference clamp multimeter or a current clamp KP-PB-111
74 DC current / DC current meters Calibration – electrical quantities
from 0 µA to 200 µA · CMC 91 µA/A + 10 nA from 0,2 mA to 2 mA · CMC 46 µA/A + 30 nA from 2 mA to 20 mA · CMC 46 µA/A + 0,21 µA from 20 mA to 200 mA · CMC 51 µA/A + 2,2 µA from 0,2 A to 2 A · CMC 87 µA/A + 32 µA from 2 A to 20 A · CMC 0,023 % + 0,30 mA from 20 A to 30 A · CMC 0,034 % + 0,94 mA
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a reference calibrator or comparison with a reference multimeter KP-PB-111
75 DC current / DC current meters Calibration – electrical quantities
30 A to 60 A · CMC 0,64 % + 0,10 A 60 A to 300 A · CMC 0,78 % + 0,13 A 300 A to 1500 A · CMC 0,60 % + 0,42 A
CMC for the field of measured quantity: Electrical quantities
 Measurement of a current simulated by a calibrator with current coil KP-PB-111
76 AC voltage / AC voltage sources Calibration – electrical quantities
10 Hz to 40 Hz — 0 mV to 100 mV · CMC 0,061 % + 19 µV 40 Hz to 200 Hz — 0 mV to 100 mV · CMC 0,027 % + 15 µV 200 Hz to 2 kHz — 0 mV to 100 mV · CMC 0,023 % + 13 µV 2 kHz to 20 kHz — 0 mV to 100 mV · CMC 0,032 % + 14 µV 20 kHz to 100 kHz — 0 mV to 100 mV · CMC 0,081 % + 51 µV 10 Hz to 40 Hz — 0,1 V to 1 V · CMC 0,048 % + 0,24 mV 40 Hz to 200 Hz — 0,1 V to 1 V · CMC 0,023 % + 61 µV 200 Hz to 2 kHz — 0,1 V to 1 V · CMC 0,018 % + 61 µV 2 kHz to 20 kHz — 0,1 V to 1 V · CMC 0,030 % + 0,10 mV 20 kHz to 100 kHz — 0,1 V to 1 V · CMC 0,072 % + 0,50 mV 100 kHz to 1 MHz — 0,1 V to 1 V · CMC 1,2 % + 25 mV 10 Hz to 40 Hz — 1 V to 10 V · CMC 0,048 % + 2,3 mV 40 Hz to 200 Hz — 1 V to 10 V · CMC 0,021 % + 0,61 mV 200 Hz to 2 kHz — 1 V to 10 V · CMC 0,018 % + 0,61 mV 2 kHz to 20 kHz — 1 V to 10 V · CMC 0,030 % + 1,0 mV 20 kHz to 100 kHz — 1 V to 10 V · CMC 0,072 % + 5,0 mV 100 kHz to 200 kHz — 1 V to 10 V · CMC 1,2 % + 0,25 V 10 Hz to 40 Hz — 10 V to 100 V · CMC 0,060 % + 23 mV 40 Hz to 200 Hz — 10 V to 100 V · CMC 0,024 % + 10 mV 200 Hz to 2 kHz — 10 V to 100 V · CMC 0,022 % + 7,1 mV 2 kHz to 20 kHz — 10 V to 100 V · CMC 0,033 % + 11 mV 20 kHz to 50 kHz — 10 V to 100 V · CMC 0,11 % + 62 mV 10 Hz to 40 Hz — 100 V to 1000 V · CMC 0,060 % + 0,16 V 40 Hz to 200 Hz — 100 V to 1000 V · CMC 0,021 % + 0,10 V 200 Hz to 2 kHz — 100 V to 1000 V · CMC 0,022 % + 0,10 V 2 kHz to 10 kHz — 100 V to 1000 V · CMC 0,037 % + 0,11 V
CMC for the field of measured quantity: Electrical quantities
 Direct measurement by a reference multimeter KP-PB-112
77 AC voltage / AC voltage sources Calibration – electrical quantities
50 Hz — 1 kV to 10 kV · CMC 2,2 %
CMC for the field of measured quantity: Electrical quantities
 Measurement with a reference multimeter with HV probe KP-PB-112
78 AC voltage / AC voltage meters Calibration – electrical quantities
10 Hz to 45 Hz — 0 mV to 202 mV · CMC 0,071 % + 24 µV 45 Hz to 1 kHz — 0 mV to 202 mV · CMC 0,018 % + 24 µV 1 kHz to 20 kHz — 0 mV to 202 mV · CMC 0,020 % + 33 µV 20 kHz to 100 kHz — 0 mV to 202 mV · CMC 0,13 % + 56 µV 100 kHz to 500 kHz — 0 mV to 202 mV · CMC 0,35 % + 0,10 mV 10 Hz to 45 Hz — 0,202 V to 2,02 V · CMC 0,053 % + 0,21 mV 45 Hz to 1 kHz — 0,202 V to 2,02 V · CMC 0,019 % + 0,12 mV 1 kHz to 20 kHz — 0,202 V to 2,02 V · CMC 0,020 % + 0,21 mV 20 kHz to 100 kHz — 0,202 V to 2,02 V · CMC 0,067 % + 0,30 mV 100 kHz to 500 kHz — 0,202 V to 2,02 V · CMC 0,29 % + 0,46 mV 10 Hz to 45 Hz — 2,02 V to 20,2 V · CMC 0,050 % + 2,0 mV 45 Hz to 1 kHz — 2,02 V to 20,2 V · CMC 0,017 % + 1,3 mV 1 kHz to 20 kHz — 2,02 V to 20,2 V · CMC 0,021 % + 1,8 mV 20 kHz to 100 kHz — 2,02 V to 20,2 V · CMC 0,083 % + 3,8 mV 30 Hz to 45 Hz — 20,2 V to 202 V · CMC 0,050 % + 24 mV 45 Hz to 1 kHz — 20,2 V to 202 V · CMC 0,017 % + 13 mV 1 kHz to 10 kHz — 20,2 V to 202 V · CMC 0,021 % + 19 mV 10 kHz to 40 kHz — 20,2 V to 202 V · CMC 0,035 % + 31 mV 30 Hz to 45 Hz — 202 V to 1020 V · CMC 0,060 % + 0,21 V 45 Hz to 1 kHz — 202 V to 1020 V · CMC 0,024 % + 0,08 V 1 kHz to 10 kHz — 202 V to 1020 V · CMC 0,039 % + 0,13 V
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a reference calibrator or comparison with a reference multimeter KP-PB-112
79 AC current / AC current sources Calibration – electrical quantities
10 Hz to 40 Hz — 0 µA to 100 µA · CMC 0,061 % + 24 nA 40 Hz to 1 kHz — 0 µA to 100 µA · CMC 0,039 % + 16 nA 1 kHz to 10 kHz — 0 µA to 100 µA · CMC 0,083 % + 32 nA 10 Hz to 40 Hz — 100 µA to 1 mA · CMC 0,058 % + 0,21 µA 40 Hz to 1 kHz — 100 µA to 1 mA · CMC 0,037 % + 0,19 µA 1 kHz to 10 kHz — 100 µA to 1 mA · CMC 0,082 % + 0,31 µA 10 Hz to 40 Hz — 1 mA to 10 mA · CMC 0,058 % + 3,1 µA 40 Hz to 1 kHz — 1 mA to 10 mA · CMC 0,037 % + 1,9 µA 1 kHz to 10 kHz — 1 mA to 10 mA · CMC 0,081 % + 3,1 µA 10 Hz to 40 Hz — 10 mA to 100 mA · CMC 0,059 % + 27 µA 40 Hz to 1 kHz — 10 mA to 100 mA · CMC 0,035 % + 12 µA 1 kHz to 10 kHz — 10 mA to 100 mA · CMC 0,082 % + 30 µA 10 Hz to 40 Hz — 100 mA to 1 A · CMC 0,074 % + 0,34 mA 40 Hz to 1 kHz — 100 mA to 1 A · CMC 0,054 % + 0,17 mA 1 kHz to 10 kHz — 100 mA to 1 A · CMC 0,081 % + 0,5 mA 10 Hz to 40 Hz — 1 A to 10 A · CMC 0,10 % + 5,8 mA 40 Hz to 1 kHz — 1 A to 10 A · CMC 0,091 % + 3,2 mA 10 Hz to 40 Hz — 10 A to 30 A · CMC 0,093 % + 13 mA 40 Hz to 1 kHz — 10 A to 30 A · CMC 0,082 % + 9,1 mA
CMC for the field of measured quantity: Electrical quantities
 Direct measurement by a reference multimeter KP-PB-113
80 AC current / AC current sources Calibration – electrical quantities
30 Hz to 60 Hz — 0 A to 4 A · CMC 0,72 % + 0,003 A 30 Hz to 60 Hz — 4 A to 40 A · CMC 0,71 % + 0,03 A 30 Hz to 60 Hz — 40 A to 200 A · CMC 1,2 % + 0,5 A 30 Hz to 60 Hz — 200 A to 400 A · CMC 1,1 % + 1,3 A 30 Hz to 60 Hz — 400 A to 1500 A · CMC 1,3 % + 1,6 A 30 Hz to 60 Hz — 1500 A to 2000 A · CMC 1,1 % + 4,6 A
CMC for the field of measured quantity: Electrical quantities
 Direct measurement by a reference clamp multimeter or a current clamp KP-PB-113
81 AC current / AC current meters Calibration – electrical quantities
10 Hz to 45 Hz — 10 µA to 202 µA · CMC 0,20 % + 0,25 µA 45 Hz to 1 kHz — 10 µA to 202 µA · CMC 0,071 % + 0,15 µA 1 kHz to 10 kHz — 10 µA to 202 µA · CMC 0,96 % + 0,20 µA 10 Hz to 45 Hz — 0,202 mA to 2,02 mA · CMC 0,19 % + 0,31 µA 45 Hz to 1 kHz — 0,202 mA to 2,02 mA · CMC 0,055 % + 0,27 µA 1 kHz to 10 kHz — 0,202 mA to 2,02 mA · CMC 0,50 % + 0,35 µA 10 Hz to 45 Hz — 2,02 mA to 20,2 mA · CMC 0,19 % + 4,1 µA 45 Hz to 1 kHz — 2,02 mA to 20,2 mA · CMC 0,048 % + 2,5 µA 1 kHz to 10 kHz — 2,02 mA to 20,2 mA · CMC 0,25 % + 3,4 µA 10 Hz to 45 Hz — 20,2 mA to 202 mA · CMC 0,19 % + 41 µA 45 Hz to 1 kHz — 20,2 mA to 202 mA · CMC 0,049 % + 25 µA 1 kHz to 10 kHz — 20,2 mA to 202 mA · CMC 0,50 % + 43 µA 10 Hz to 45 Hz — 0,202 A to 2,02 A · CMC 0,19 % + 0,36 mA 45 Hz to 1 kHz — 0,202 A to 2,02 A · CMC 0,064 % + 0,28 mA 1 kHz to 5 kHz — 0,202 A to 2,02 A · CMC 0,50 % + 0,45 mA 30 Hz to 45 Hz — 2,02 A to 30 A · CMC 0,19 % + 3,5 mA 45 Hz to 100 Hz — 2,02 A to 30 A · CMC 0,059 % + 2,5 mA 100 Hz to 1 kHz — 2,02 A to 30 A · CMC 0,50 % + 4,3 mA
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a reference calibrator or comparison with a reference multimeter KP-PB-113
82 AC current / AC current meters Calibration – electrical quantities
30 to 60 Hz — 30 A to 60 A · CMC 0,43 % + 0,07 A 30 to 60 Hz — 60 A to 300 A · CMC 0,50 % + 0,07 A 30 to 60 Hz — 300 A to 1500 A · CMC 0,48 % + 0,08 A
CMC for the field of measured quantity: Electrical quantities
 Measurement of a current simulated by a calibrator with current coil KP-PB-113
83 DC resistance / Resistors and resistance boxes Calibration – electrical quantities
from 0 Ω to 1 Ω · CMC 20 µΩ/Ω + 6,1 µΩ from 1 Ω to 10 Ω · CMC 11 µΩ/Ω + 31 µΩ from 10 Ω to 100 Ω · CMC 10 µΩ/Ω + 0,10 mΩ from 100 Ω to 1 kΩ · CMC 9,1 µΩ/Ω + 0,81 mΩ from 1 kΩ to 10 kΩ · CMC 11 µΩ/Ω + 8,1 mΩ from 10 kΩ to 100 kΩ · CMC 12 µΩ/Ω + 81 mΩ from 0,1 MΩ to 1 MΩ · CMC 13 µΩ/Ω + 2 Ω from 1 MΩ to 10 MΩ · CMC 18 µΩ/Ω + 80 Ω from 10 MΩ to 90 MΩ · CMC 0,019 % from 90 MΩ to 900 MΩ · CMC 0,051 % 0,9 GΩ to 9 GΩ · CMC 0,20 % 9 GΩ to 2000 GΩ · CMC 2,5 %
CMC for the field of measured quantity: Electrical quantities
 Direct measurement by a reference multimeter KP-PB-114
84 DC resistance / DC resistance meters Calibration – electrical quantities
0 Ω · CMC 5,5 mΩ 0,0001 Ω · CMC 0,0073 % 0,001 Ω · CMC 0,0029 % 0,01 Ω · CMC 0,0022 % 0,1 Ω · CMC 0,0020 % 1 Ω · CMC 0,0020 % 10 Ω · CMC 0,0005 % 100 Ω · CMC 0,0004 % 1 kΩ · CMC 0,0039 % 10 kΩ · CMC 0,0019 % 100 kΩ · CMC 0,0031 % 1 MΩ · CMC 0,0046 % 10 MΩ · CMC 0,018 % 100 MΩ · CMC 0,35 % 1 GΩ · CMC 1,0 %
CMC for the field of measured quantity: Electrical quantities
 Direct measurement of fixed resistance standards or direct measurement on a calibrator or comparison with a reference multimeter KP-PB-114
85 DC resistance / DC resistance meters Calibration – electrical quantities
0 Ω to 1 kΩ · CMC 0,020 % + 50 mΩ from 1 kΩ to 10 kΩ · CMC 0,020 % + 58 mΩ from 10 kΩ to 100 kΩ · CMC 0,020 % + 0,30 Ω from 0,1 MΩ to 1 MΩ · CMC 0,020 % + 4,0 Ω from 1 MΩ to 10 MΩ · CMC 0,020 % +0,13 kΩ
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a calibrator KP-PB-114
86 AC resistance / AC resistance meters Calibration – electrical quantities
1 kHz — 10 Ω · CMC 0,013 % 100 kHz — 10 Ω · CMC 0,043 % 1 kHz — 50 Ω · CMC 0,013 % 1 kHz — 100 Ω · CMC 0,013 % 100 kHz — 50 Ω · CMC 0,021 % 100 kHz — 100 Ω · CMC 0,021 % 1 kHz — 1 kΩ · CMC 0,011 % 100 kHz — 1 kΩ · CMC 0,021 % 1 kHz — 10 kΩ · CMC 0,011 % 100 kHz — 10 kΩ · CMC 0,041 % 1 kHz — 100 kΩ · CMC 0,03 % 100 kHz — 100 kΩ · CMC 0,12 % 1 kHz — 1 MΩ · CMC 0,03 % 100 kHz — 1 MΩ · CMC 0,38 %
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on resistance standards KP-PB-115
87 DC Power / DC Power Meters (for voltage from 1 V to 1,000 V and current from 0.5 mA to 30 A) Calibration – electrical quantities
0,5 mW to 30 kW · CMC 0,072 %
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a reference calibrator KP-PB-123
88 DC Power / DC Power Meters (for voltage 1 V to 1,000 V and current 30 A to 1,500 A) Calibration – electrical quantities
30 kW to 1500 kW · CMC 0,74 %
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a reference calibrator with current coil KP-PB-123
89 AC active power single phase/ AC active power meters (for voltage from 1 V to 1,000 V and current from 0.5 mA to 30 A, frequency from 40 Hz to 400 Hz), capacitive and inductive Calibration – electrical quantities
cos φ 1 — 0,5 mW to 30 kW · CMC 0,13 % cos φ 0.8 to 0.9 — 0,5 mW to 30 kW · CMC 0,32 % cos φ 0.7 to 0.8 — 0,5 mW to 30 kW · CMC 0,46 % cos φ 0.6 to 0.7 — 0,5 mW to 30 kW · CMC 0,62 % cos φ 0.5 to 0.6 — 0,5 mW to 30 kW · CMC 0,8 % cos φ 0.4 to 0.5 — 0,5 mW to 30 kW · CMC 1,0 % cos φ 0.3 to 0.4 — 0,5 mW to 30 kW · CMC 1,4 % cos φ 0.2 to 0.3 — 0,5 mW to 30 kW · CMC 1,9 % cos φ 0.1 to 0.2 — 0,5 mW to 30 kW · CMC 2,9 % cos φ 0.1 — 0,5 mW to 30 kW · CMC 5,9 %
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a reference calibrator KP-PB-123
90 AC active power single phase/ AC active power meters (for voltage 1 V to 1,000 V and current 30 A to 1,500 A, frequency 30 Hz to 60 Hz) Calibration – electrical quantities
cos φ 1 — 30 kW to 1500 kW · CMC 0,95 %
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a reference calibrator with current coil KP-PB-123
91 Capacity / Capacity meters Calibration – electrical quantities
10 Hz to 1 kHz — 1 nF · CMC 0,30 % 1 kHz — 10 nF · CMC 0,30 % 100 kHz — 10 nF · CMC 1,5 % 10 Hz to 1 kHz — 20 nF · CMC 0,30 % 10 Hz to 1 kHz — 50 nF · CMC 0,30 % 10 Hz to 1 kHz — 100 nF · CMC 0,30 % 10 Hz to 1 kHz — 1 µF · CMC 0,49 % 10 Hz to 1 kHz — 10 µF · CMC 0,72 % 1 kHz — 100 µF · CMC 5,1 %
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a reference calibrator or direct measurement on capacity standards KP-PB-115
92 Inductance / Inductance meters Calibration – electrical quantities
1 kHz — 1 mH · CMC 0,61 % 1 kHz — 10 mH · CMC 0,61 % 1 kHz — 20 mH · CMC 0,61 % 1 kHz — 30 mH · CMC 0,61 % 1 kHz — 50 mH · CMC 0,61 % 1 kHz — 100 mH · CMC 0,61 % 1 kHz — 1 H · CMC 0,67 % 1 kHz — 10 H · CMC 0,78 %
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a reference calibrator KP-PB-115
93 Inspection equipment / Insulation resistance Calibration – electrical quantities
Measuring voltage up to 5,000 V — 0,01 MΩ to 5 MΩ · CMC 0,12 % Measuring voltage up to 5,000 V — 5 MΩ to 121 MΩ · CMC 0,22 % Measuring voltage up to 5,000 V — 122 MΩ to 1,221 GΩ · CMC 0,52 % Measuring voltage up to 5,000 V — 1,22 GΩ to 12,221 GΩ · CMC 1,2 %
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a calibrator of inspection instruments or a reference resistance box KP-PB-120
94 Inspection equipment / Mains impedance at 50 Hz Calibration – electrical quantities
Z₀= 0 Ω to 2 Ω · CMC 20 mΩ 50 mΩ + Z₀ · CMC 2,4 mΩ 100 mΩ + Z₀ · CMC 3,8 mΩ 220 mΩ + Z₀ · CMC 6,6 mΩ 330 mΩ + Z₀ · CMC 9,6 mΩ 500 mΩ + Z₀ · CMC 12 mΩ 1 Ω + Z₀ · CMC 16 mΩ 5 Ω + Z₀ · CMC 32 mΩ 10 Ω + Z₀ · CMC 54 mΩ 100 Ω + Z₀ · CMC 0,50 Ω 1 kΩ + Z₀ · CMC 5,0 Ω
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a calibrator of inspection instruments KP-PB-120
95 Inspection equipment / Transient resistance Calibration – electrical quantities
50 Hz — 0,01 Ω · CMC 0,60 % 50 Hz — 0,1 Ω · CMC 0,20 % 50 Hz — 1 Ω · CMC 0,011 %
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on impedance standards KP-PB-120
96 Inspection equipment / Leakage current Calibration – electrical quantities
2 mA · CMC 1,7 % 4,7 mA · CMC 1,7 % 7,7 mA · CMC 1,7 %
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a calibrator of inspection instruments or direct measurement with a multimeter KP-PB-120
97 Inspection equipment / Tripping current of residual current circuit breakers Calibration – electrical quantities
2 mA to 3000 mA · CMC 1,4 %
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a calibrator of inspection instruments KP-PB-120
98 Inspection equipment / Tripping time of residual current circuit breakers Calibration – electrical quantities
10 ms to 400 ms · CMC 0,40 ms
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on a calibrator of inspection instruments KP-PB-120
99 Oscilloscope / Vertical amplifier Calibration – electrical quantities
0 Hz — 2 mV to 50 V · CMC 0,012 % + 20 µV 1 kHz — 2 mV to 50 V · CMC 0,13 % + 40 µV
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on an oscilloscope calibrator KP-PB-121
100 Oscilloscope / Time base Calibration – electrical quantities
2 ns to 5 s · CMC 0,010 %
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on an oscilloscope calibrator KP-PB-121
101 Oscilloscope / Limit frequency Calibration – electrical quantities
50 Ω 600 mVp-p — 5 MHz to 600 MHz · CMC 15 %
CMC for the field of measured quantity: Electrical quantities
 Direct measurement on an oscilloscope calibrator KP-PB-121
102 Frequency / Frequency generators Calibration – time and frequency quantities
0,001 Hz to 20 GHz · CMC 9,3·10⁻⁸
CMC for the field of measured quantity: Time and frequency quantities
 Direct measurement by a reference counter KP-PB-100
103 Frequency / frequency meters Calibration – time and frequency quantities
sine wave signal — 1 Hz to 10 MHz · CMC 20·10⁻⁶
CMC for the field of measured quantity: Time and frequency quantities
 Direct measurement on a reference calibrator KP-PB-100
104 Time interval / Manually operated time meters Calibration – time and frequency quantities
0:00:00 h:min:s to 23:59:59 h:min:s · CMC 0,10 s
CMC for the field of measured quantity: Time and frequency quantities
 Comparison with a time interval standard KP-PB-100
105 Time base of digital stopwatch Calibration – time and frequency quantities
from 10 Hz to 10 MHz · CMC 4,7·10⁻⁶
CMC for the field of measured quantity: Time and frequency quantities
 Indirect measurement by a reference counter KP-PB-100
106 Relative humidity Calibration – physicochemical quantities
(10 to 60) °C — 10 % RH to 40 % RH · CMC 0,9 % RH (10 to 60) °C — 40 % RH to 70 % RH · CMC 1,0 % RH (10 to 60) °C — 70 % RH to 80 % RH · CMC 1,1 % RH (10 to 60) °C — 80 % RH to 90 % RH · CMC 1,2 % RH (10 to 60) °C — 90 % RH to 95 % RH · CMC 1,6 % RH
CMC for the field of measured quantity: Physicochemical quantities
 Comparison with a humidity standard KP-PB-99

Reference standards (40)

KP-PB-01
KP-PB-02
KP-PB-04
KP-PB-07
KP-PB-100
KP-PB-110
KP-PB-111
KP-PB-112
KP-PB-113
KP-PB-114
KP-PB-115
KP-PB-12
KP-PB-120
KP-PB-121
KP-PB-122
KP-PB-123
KP-PB-14
KP-PB-15
KP-PB-16
KP-PB-19
KP-PB-20
KP-PB-21
KP-PB-23
KP-PB-24
KP-PB-25
KP-PB-26
KP-PB-27
KP-PB-28
KP-PB-29
KP-PB-31
KP-PB-36
KP-PB-40
KP-PB-41
KP-PB-51
KP-PB-53
KP-PB-55
KP-PB-56
KP-PB-71
KP-PB-75
KP-PB-99

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2318