🇨🇿 LAB-MET s.r.o. PL

ČIA 2281 • Brno, Czech Republic • 9 calibration items

Metrology & calibration

LAB-MET s.r.o. is a calibration laboratory accredited by ČIA under number 2281 (Brno, Czech Republic). Its accreditation scope covers 9 calibration items in the following areas: Metrology & calibration. Calibrated items include: Electronic and dial thermometers built into equipment, Electronic and direct-reading thermometers, Electronic and hair hygrometers, Electronic hygrometers, electronic hygrometers incl. the loop (chain). Most frequently used calibration principles: Comparison with a standard, Gravimetrically, Comparison with a standard tachometer by the non-contact method.

At a glance

Accreditation number: ČIA 2281
Calibration items in scope: 9
Types of calibrated items: 9
Calibration principles used: 3
City: Brno, Czech Republic
Valid until: 01-11-2027

Accreditation number: 2281
Accreditation body: ČIA
Address: Štěpánkova 6, 644 00 Brno
City: Brno, Czech Republic
Division: Laboratorium wzorcujące
Valid until: 01-11-2027

What this laboratory calibrates (9)

Electronic and dial thermometers built into equipment — 1 calibration item
Electronic and direct-reading thermometers — 1 calibration item
Electronic and hair hygrometers — 1 calibration item
Electronic hygrometers, electronic hygrometers incl. the loop (chain) — 1 calibration item
Glass thermometers — 1 calibration item
Hot-air and steam sterilizers, drying ovens, furnaces, thermostats, freezing and cooling equipment, liquid baths, refrigerated centrifuges, climatic chambers (temperature part only, up to a volume of 2000 dm³), homogenization boilers — 1 calibration item
Other piston-operated measuring instruments — 1 calibration item
Piston pipettes — 1 calibration item
Rotational speed meters — 1 calibration item

Calibration principles (3)

Comparison with a standard — 6 calibration items
Gravimetrically — 2 calibration items
Comparison with a standard tachometer by the non-contact method — 1 calibration item

Certificate information

Certificate date: 01.11.2022

Accreditation scope — calibration items (9)

CMC — lowest stated expanded measurement uncertainty (ILAC-P14, EA-4/02 M); if not stated otherwise, coverage probability approx. 95 % and values without a unit are relative to the measured value. The uncertainty of a specific calibration may be higher.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Piston pipettes	Calibration – volume, flow 0,5 µl to 10000 µl · CMC 0,12 % + 0,02 µl CMC for the field of measured quantity: Volume, flow	Gravimetrically	MKO 3/001/98 (ČSN EN ISO 8655-6 Euramet cg-19)
2	Other piston-operated measuring instruments	Calibration – volume, flow 100 µl to 50000 µl · CMC 0,05 % CMC for the field of measured quantity: Volume, flow	Gravimetrically	MKO 3/001/98 (ČSN EN ISO 8655-6 Euramet cg-19)
3	Rotational speed meters	Calibration – mechanical motion - rotational speed 1,0 min⁻¹ to 600,0 min⁻¹ · CMC 0,2 min⁻¹ 600,1 min⁻¹ to 999,9 min⁻¹ · CMC 1,2 min⁻¹ 1000 min⁻¹ to 30000 min⁻¹ · CMC 2 min⁻¹ 30001 min⁻¹ to 99999 min⁻¹ · CMC 5 min⁻¹ CMC for the field of measured quantity: Mechanical motion - rotational speed	Comparison with a standard tachometer by the non-contact method	MKOT 3/027/12
4	Glass thermometers	Calibration – temperature -30 °C to 140 °C · CMC 0,08 °C 140 °C to 250 °C · CMC 0,10 °C CMC for the field of measured quantity: Temperature	Comparison with a standard	MKST 3/002/98
5	Electronic and direct-reading thermometers	Calibration – temperature -30 °C to 0 °C · CMC 0,08 °C 0 °C · CMC 0,05 °C 0 °C to 140 °C · CMC 0,08 °C 140 °C to 250 °C · CMC 0,09 °C CMC for the field of measured quantity: Temperature	Comparison with a standard	MKET 3/003/98
6	Electronic and dial thermometers built into equipment	Calibration – temperature -80 °C to -50 °C · CMC 0,2 °C 0 °C · CMC 0,07 °C 0 °C to 300 °C · CMC 0,1 °C 300 °C to 500 °C · CMC 1,5 °C 500 °C to 800 °C · CMC 1,8 °C 800 °C to 1000 °C · CMC 2,0 °C 1000 °C to 1200 °C · CMC 2,1 °C CMC for the field of measured quantity: Temperature	Comparison with a standard	KEXT 3/030/00
7	Hot-air and steam sterilizers, drying ovens, furnaces, thermostats, freezing and cooling equipment, liquid baths, refrigerated centrifuges, climatic chambers (temperature part only, up to a volume of 2000 dm³), homogenization boilers	Calibration – temperature -80 °C to -50 °C · CMC 0,2 °C -50 °C to -50 °C · CMC 0,1 °C 0 °C · CMC 0,07 °C 0 °C to 300 °C · CMC 0,1 °C 300 °C to 500 °C · CMC 1,5 °C 500 °C to 800 °C · CMC 1,8 °C 800 °C to 1000 °C · CMC 2,0 °C 1000 °C to 1200 °C · CMC 2,1 °C CMC for the field of measured quantity: Temperature	Comparison with a standard	KEXT 3/036/03
8	Electronic and hair hygrometers	Calibration – humidity (18 to 25) °C — 20 % RH to 50 % RH · CMC 1,5 % RH (18 to 25) °C — 50 % RH to 70 % RH · CMC 1,6 % RH (18 to 25) °C — 70 % RH to 90 % RH · CMC 1,7 % RH CMC for the field of measured quantity: Humidity	Comparison with a standard	MKEV 3/039/07
9	Electronic hygrometers, electronic hygrometers incl. the loop (chain)	Calibration – humidity (18 to 25) °C — 20 % RH to 30 % RH · CMC 1,6 % RH (18 to 25) °C — 30 % RH to 70 % RH · CMC 1,7 % RH (18 to 25) °C — 70 % RH to 90 % RH · CMC 1,8 % RH CMC for the field of measured quantity: Humidity	Comparison with a standard	KEXV 3/041/12

Reference standards (10)

Euramet cg-19

KEXT 3/030/00

KEXT 3/036/03

KEXV 3/041/12

MKET 3/003/98

MKEV 3/039/07

MKO 3/001/98

MKOT 3/027/12

MKST 3/002/98

ČSN EN ISO 8655-6

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/CZ/2281