🇨🇿 Česká republika – Ministerstvo obrany PL
Other
Česká republika – Ministerstvo obrany is a laboratory accredited by ČIA under number 1705 (Týniště nad Orlicí, Czech Republic). Its accreditation scope covers 15 test methods in the following areas: Other. Test objects include: Ammunition up to and including 40 mm calibre, Cartridges up to and including 155 mm calibre, Smokeless powders, homogeneous solid propellants, All types of high explosives introduced in the Army of the Czech Re…. Most frequently used techniques: crusher method, differential thermal analysis (DTA), gravimetric method.
At a glance
- Accreditation number: ČIA 1705
- Methods in scope: 15
- Types of test objects: 12
- Techniques used: 7
- City: Týniště nad Orlicí, Czech Republic
- Valid until: 01-10-2029
- Accreditation number
- 1705
- Accreditation body
- ČIA
- Address
- Vojenské zařízení 5512, 517 21 Týniště nad Orlicí
- City
- Týniště nad Orlicí, Czech Republic
- Division
- Agencja Logistyki, Centrum Zabezpieczenia Amunicji – Laboratorium Badawcze
- Valid until
- 01-10-2029
What this laboratory tests (12)
- Ammunition up to and including 40 mm calibre — 2 methods
- Cartridges up to and including 155 mm calibre — 2 methods
- Smokeless powders, homogeneous solid propellants — 2 methods
- All types of high explosives introduced in the Army of the Czech Republic — 1 method
- Ammunition up to 12.7 mm calibre and 40 mm calibre ammunition — 1 method
- Cartridges of calibre 5.56×45 mm, 7.62×51 mm, 9×19 mm, 12.7×99 mm, 20×102 mm, 30×173 mm, 40x53 mm — 1 method
- Cartridges up to and including 40 mm calibre — 1 method
- Flash detonators — 1 method
- Heterogeneous solid propellants, high explosives, pyrotechnic compositions, black powder — 1 method
- Homogeneous and heterogeneous solid propellants — 1 method
- Smokeless powders, homogeneous and heterogeneous solid propellants, high explosives, pyrotechnic compositions, black powder — 1 method
- Smokeless powders, homogeneous solid propellants, high explosives — 1 method
Analytical techniques used (7)
- crusher method — 1 method
- differential thermal analysis (DTA) — 1 method
- gravimetric method — 1 method
- HPLC/DAD — 1 method
- piezo method — 1 method
- ultrasonic flaw detection — 1 method
- vacuum stability test — 1 method
Laboratory sections (3)
- Ammunition Testing Group – Technical Testing Workplace — 6 methods
- Ammunition Testing Group – Chemical Testing Workplace — 5 methods
- Ammunition Testing Group – Firing Tests, Ballistics, Ammunition Preparation and Mounted Weapons Workplace — 4 methods
Laboratory locations
- Grupa badań amunicji – Pracownia badań technicznych — Vojenské zařízení 5512
- Grupa badań amunicji – Pracownia badań chemicznych — Vojenské zařízení 5512
- Grupa badań amunicji – Pracownia badań strzelaniem, balistyki, przygotowania amunicji i broni na podstawach — Vojenské zařízení 5512
Certificate information
- Certificate date
- 01.10.2024
Accreditation scope — test methods (15)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Ammunition Testing Group – Technical Testing Workplace | |||||
| 1 | Ammunition up to and including 40 mm calibre | Measurement of bullet pull force from cartridges Regulated area: Ammunition Testing Group – Technical Testing Workplace |
SOP 01 (ČOS 130511; AOP-4745; AEP-4745) | ||
| 2 | Homogeneous and heterogeneous solid propellants | Ultrasonic flaw detection test Regulated area: Ammunition Testing Group – Technical Testing Workplace |
ultrasonic flaw detection | SOP 02 (ČOS 137603, kap. 8.4 mimo čl. 8.4.3.5) | |
| 3 | Flash detonators | Test of initiating capability and performance Regulated area: Ammunition Testing Group – Technical Testing Workplace |
SOP 03 (ČSN 66 8211:1969) | ||
| 4 | Ammunition up to and including 40 mm calibre | Visual, dimensional and mass inspection Regulated area: Ammunition Testing Group – Technical Testing Workplace |
SOP 13 (ČSN 39 5020; ČOS 130511; Děl-27-8) | ||
| 5 | All types of high explosives introduced in the Army of the Czech Republic | Density test Regulated area: Ammunition Testing Group – Technical Testing Workplace |
SOP 14 (ČSN 66 8050:1977) | ||
| 6 | Ammunition up to 12.7 mm calibre and 40 mm calibre ammunition | Waterproofness test Regulated area: Ammunition Testing Group – Technical Testing Workplace |
SOP 15 (ČOS 130511; AEP-4745) | ||
| Ammunition Testing Group – Chemical Testing Workplace | |||||
| 7 | Smokeless powders, homogeneous and heterogeneous solid propellants, high explosives, pyrotechnic compositions, black powder | Determination of moisture and volatile matter content by gravimetry Regulated area: Ammunition Testing Group – Chemical Testing Workplace |
gravimetric method | SOP 04 (ČOS 137603, kap. 8.5) | |
| 8 | Smokeless powders, homogeneous solid propellants, high explosives | Determination of chemical stability by the vacuum stability test Regulated area: Ammunition Testing Group – Chemical Testing Workplace |
vacuum stability test | SOP 05 (ČOS 137601, kap. 7.4; ČOS 137603, kap. 8.9) | |
| 9 | Heterogeneous solid propellants, high explosives, pyrotechnic compositions, black powder | Determination of thermal stability by DTA Regulated area: Ammunition Testing Group – Chemical Testing Workplace |
differential thermal analysis (DTA) | SOP 06 (ČOS 137603, kap. 8.11) | |
| 10 | Smokeless powders, homogeneous solid propellants | Determination of chemical stability at 100 °C Regulated area: Ammunition Testing Group – Chemical Testing Workplace |
SOP 07 (ČOS 137603, kap. 8.10) | ||
| 11 | Smokeless powders, homogeneous solid propellants | Determination of stabiliser depletion by HPLC/DAD 2-nitrodiphenylamine (2-NDPA) Akardite II (AKA-II) Ethyl centralite (CI) Methyl centralite (CII) Diphenylamine (DPA) N-nitrosodiphenylamine (N-NO-DPA) sum of selected stabilisers by calculation (calculated) Regulated area: Ammunition Testing Group – Chemical Testing Workplace |
HPLC/DAD | SOP 12 (ČOS 137601, kap. 7.5; ČOS 137603, kap. 8.6) | |
| Ammunition Testing Group – Firing Tests, Ballistics, Ammunition Preparation and Mounted Weapons Workplace | |||||
| 12 | Cartridges up to and including 155 mm calibre | Projectile velocity test Regulated area: Ammunition Testing Group – Firing Tests, Ballistics, Ammunition Preparation and Mounted Weapons Workplace |
SOP 08 (ČOS 130506; ČOS 130012; TP-VD-8-79) | ||
| 13 | Cartridges up to and including 155 mm calibre | Test of maximum propellant gas pressure by the crusher method Regulated area: Ammunition Testing Group – Firing Tests, Ballistics, Ammunition Preparation and Mounted Weapons Workplace |
crusher method | SOP 09 (ČOS 130506; ČOS 130012; TP-VD-8-79) | |
| 14 | Cartridges of calibre 5.56×45 mm, 7.62×51 mm, 9×19 mm, 12.7×99 mm, 20×102 mm, 30×173 mm, 40x53 mm | Combined electronic pressure, velocity and action time test (EPVAT) Regulated area: Ammunition Testing Group – Firing Tests, Ballistics, Ammunition Preparation and Mounted Weapons Workplace |
SOP 10 (ČOS 130511; MOPI to STANAG 4624, Ed.1. 30 mm×173 Ammunition; Soubor metodik zkoušek nábojů 20×102 mm a jejich dílů. Metodika č. 25; MOPI Procedures for NATO 40 mm High Velocity Linked and Packed Grenade Ammunition) | ||
| 15 | Cartridges up to and including 40 mm calibre | Test of maximum propellant gas pressure by the piezo method Regulated area: Ammunition Testing Group – Firing Tests, Ballistics, Ammunition Preparation and Mounted Weapons Workplace |
piezo method | SOP 11 (ČOS 130506; ČSN 39 5105; ČSN 39 5302) | |
Reference standards (38)
AEP-4745
AOP-4745
Děl-27-8
MOPI Procedures for NATO 40 mm High Velocity Linked and Packed Grenade Ammunition
MOPI to STANAG 4624, Ed.1. 30 mm×173 Ammunition
SOP 01
SOP 02
SOP 03
SOP 04
SOP 05
SOP 06
SOP 07
SOP 08
SOP 09
SOP 10
SOP 11
SOP 12
SOP 13
SOP 14
SOP 15
Soubor metodik zkoušek nábojů 20×102 mm a jejich dílů. Metodika č. 25
TP-VD-8-79
ČOS 130012
ČOS 130506
ČOS 130511
ČOS 137601, kap. 7.4
ČOS 137601, kap. 7.5
ČOS 137603, kap. 8.10
ČOS 137603, kap. 8.11
ČOS 137603, kap. 8.4 mimo čl. 8.4.3.5
ČOS 137603, kap. 8.5
ČOS 137603, kap. 8.6
ČOS 137603, kap. 8.9
ČSN 39 5020
ČSN 39 5105
ČSN 39 5302
ČSN 66 8050:1977
ČSN 66 8211:1969