🇨🇿 TECHNICKÉ LABORATOŘE OPAVA, akciová společnost PL
Materials & polymers
TECHNICKÉ LABORATOŘE OPAVA, akciová společnost is a laboratory accredited by ČIA under number 1322 (Opava, Czech Republic). Its accreditation scope covers 95 test methods in the following areas: Materials & polymers. Test objects include: Paints and varnishes, Roof support - hydraulic pit props and rams, Roof support – support section, Individual face support – hydraulic pit props.
At a glance
- Accreditation number: ČIA 1322
- Methods in scope: 95
- Types of test objects: 57
- City: Opava, Czech Republic
- Valid until: 13-06-2029
- Accreditation number
- 1322
- Accreditation body
- ČIA
- Address
- Těšínská 2962/79b, Předměstí, 746 01 Opava
- City
- Opava, Czech Republic
- Division
- Laboratorium Badawcze
- Valid until
- 13-06-2029
What this laboratory tests (57)
- Paints and varnishes — 8 methods
- Roof support - hydraulic pit props and rams — 8 methods
- Roof support – support section — 7 methods
- Individual face support – hydraulic pit props — 5 methods
- Rubber and plastics hoses and hose assemblies — 3 methods
- Articulated steel mine joists — 2 methods
- Hydrostatic mechanical devices — 2 methods
- Mechanical and electrotechnical parts and assemblies — 2 methods
- Mechanical and electrotechnical parts and assemblies, surface coatings and protections — 2 methods
- Mechanical legs — 2 methods
- Mechanised reinforcement section — 2 methods
- Mining steel reinforcement assemblies — 2 methods
- Powered supports – hydraulic control systems – valves, individual reinforcement – hydraulic mine legs — 2 methods
- Profile bars — 2 methods
- Roof bar – roof support section — 2 methods
- and 42 more
Laboratory sections (2)
- Workplace Opava — 79 methods
- Workplace Čermná ve Slezsku — 16 methods
Laboratory locations
- oddział Opava — Těšínská 2962/79b, Předměstí
- oddział Čermná ve Slezsku — Čermná ve Slezsku 100
Certificate information
- Certificate date
- 10.11.2025
Accreditation scope — test methods (95)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Workplace Opava | |||||
| 1 | Individual reinforcement – hydraulic mine legs, powered supports – hydraulic legs and rams | Hydraulic test Regulated area: Tests |
ČSN 44 4440, čl. 36; ČSN EN 1804-2, příl. A.1.1, A.1.2.4; EN 1804-2, příl. A.1.1, A.1.2.4 | ||
| 2 | Powered supports – hydraulic control systems – valves, hydraulic control systems – valves, hydrostatic mechanisms | Hydraulic test Regulated area: Tests |
ČSN EN 1804-3, příl. A1.1, A.1.3, A.1.3.1, A.1.3.2, A.1.4, A.1.4.1, A.1.4.2, A.1.5, A.1.5.1, A1.5.2; EN 1804-3, příl. A1.1, A.1.3, A.1.3.1, A.1.3.2, A.1.4, A.1.4.1, A.1.4.2, A.1.5, A.1.5.1, A1.5.2; ČSN 44 4450, příl. A.3.1, A.3.2, A.3.2.1, A.3.2.2; ČSN 11 9008, čl. 4.5; ČSN 44 4440, čl. 31 | ||
| 3 | Individual face support – hydraulic pit props | Filling test Regulated area: Tests |
ČSN 44 4440, čl. 34 | ||
| 4 | Individual face support – hydraulic pit props | Inner column retraction test Regulated area: Tests |
ČSN 44 4440, čl. 35 | ||
| 5 | Individual face support – hydraulic pit props | Test to determine characteristics Regulated area: Tests |
ČSN 44 4440, čl. 37 | ||
| 6 | Individual face support – hydraulic pit props | Axial load test Regulated area: Tests |
ČSN 44 4440, čl. 38 | ||
| 7 | Individual face support – hydraulic pit props | Extra-axial load test Regulated area: Tests |
ČSN 44 4440, čl. 39 | ||
| 8 | Roof support - support section, mobile working machines, stationary machines and equipment | Determination of pass-through dimensions Regulated area: Tests |
ČSN EN 1804-1, čl. 4.1.2; EN 1804-1, čl. 4.1.2; ČSN 44 4450, čl. 5.1.2; PP - 42.03.06 (ČSN EN ISO 2867) | ||
| 9 | Roof support – support section | Hydraulics test – test of operational functionality of hydraulic components Regulated area: Tests |
ČSN EN 1804-1, příl. A.6; EN 1804-1, příl. A.6 | ||
| 10 | Roof bar – roof support section | Cyclic fatigue test Regulated area: Tests |
ČSN EN 1804-1, příl. A.1.3.1, A.1.3.2, A.5; EN 1804-1, příl. A.1.3.1, A.1.3.2, A.5 | ||
| 11 | Roof bar – roof support section | Bending test Regulated area: Tests |
ČSN EN 1804-1, příl. A.1.1, A.1.2.1, A5; EN 1804-1, příl. A.1.1, A.1.2.1, A5 | ||
| 12 | Roof support – support section | Bending test Regulated area: Tests |
ČSN EN 1804-1, příl. A.1.1, A.1.2.1, A.1.2.2; EN 1804-1, příl. A.1.1, A.1.2.1, A.1.2.2; ČSN 44 4450, příl. A.1.1, A.1.2.1 | ||
| 13 | Roof support – support section | Testing at horizontal load of trestle supports Regulated area: Tests |
ČSN EN 1804-1, příl. A.1.1, A.1.2.5; EN 1804-1, příl. A.1.1, A.1.2.5 | ||
| 14 | Roof support – support section | Cyclic fatigue tests Regulated area: Tests |
ČSN EN 1804-1, příl. A.1.1, A.1.3; EN 1804-1, příl. A.1.1, A.1.3 | ||
| 15 | Roof support – support section | Lifting and pulling points test Regulated area: Tests |
ČSN EN 1804-1, příl. A.4; EN 1804-1, příl. A.4 | ||
| 16 | Roof support – support section | Turnover resistance test Regulated area: Tests |
ČSN EN 1804-1, čl. 4.2; EN 1804-1, čl. 4.2 | ||
| 17 | Roof support – support section | Tensile and pressure test of pit prop and valve power transmission points - fittings Regulated area: Tests |
ČSN EN 1804-1, příl.A.1.2.3; EN 1804-1, příl. A.1.2.3; ČSN 44 4450, příl. A.1.2.2 | ||
| 18 | Roof support - hydraulic pit props and rams | Extension limit test Regulated area: Tests |
ČSN EN 1804-2, příl. A.1.1, A.1.2.1; EN 1804-2, příl. A.1.1, A.1.2.1; ČSN 44 4450, příl. A.2.1, A.2.1.1, A.2.2, A.2.2.1 | ||
| 19 | Roof support - hydraulic pit props and rams | Yielding test – measurement of slip rate under external load Regulated area: Tests |
ČSN EN 1804-2, příl. A.1.1, A.1.2.2; EN 1804-2, příl. A.1.1, A.1.2.2; ČSN 44 4450, příl. A.2.1, A.2.1.1, A.2.2, A.2.2.3; ČSN EN 1804-1, příl. A.1.2.4; EN 1804-1, příl. A.1.2.4 | ||
| 20 | Roof support - hydraulic pit props and rams | Overload test – static overload Regulated area: Tests |
ČSN EN 1804-2, příl. A.1.1, A.1.2.3, A.1.2.3.1; EN 1804-2, příl. A.1.1, A.1.2.3, A.1.2.3.1; ČSN 44 4450, příl. A.2.1, A.2.1.1, A.2.2, A.2.2.2, A.2.2.2.1 | ||
| 21 | Roof support - hydraulic pit props and rams | Overload test – dynamic overload Regulated area: Tests |
ČSN EN 1804-2, příl. A.1.1, A.1.2.3, A.1.2.3.2; EN 1804-2, příl. A.1.1, A.1.2.3, A.1.2.3.2 | ||
| 22 | Roof support - hydraulic pit props and rams | Eccentric force test – bending test Regulated area: Tests |
ČSN EN 1804-2, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.2; EN 1804-2, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.2 | ||
| 23 | Roof support - hydraulic pit props and rams | Eccentric force test – yielding test Regulated area: Tests |
ČSN EN 1804-2, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.3; EN 1804-2, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.3 | ||
| 24 | Roof support - hydraulic pit props and rams | Durability test Regulated area: Tests |
ČSN EN 1804-2, příl. A.1.1, A.1.4; EN 1804-2, příl. A.1.1, A.1.4 | ||
| 25 | Roof support - hydraulic pit props and rams | Tensile force test of lifting points Regulated area: Tests |
ČSN EN 1804-2, příl. A.1.5; EN 1804-2, příl. A.1.5 | ||
| 26 | Powered supports – hydraulic control systems – valves, individual reinforcement – hydraulic mine legs | Pressure test Regulated area: Tests |
ČSN EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.3, A.1.3.4, A.1.4, A.1.4.1, A.1.4.3 A.1.5, A.1.5.1, A.1.5.3; EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.3, A.1.3.4, A.1.4, A.1.4.1, A.1.4.3 A.1.5, A.1.5.1, A.1.5.3; ČSN 44 4450, příl. A.3.1, A.3.2, A.3.2.1, A.3.2.3, A.3.2.5; ČSN 44 4440, čl. 32 a) | ||
| 27 | Roof support - Hydraulic control systems – Type A valves | Hydraulic pressure pulse test Regulated area: Tests |
ČSN EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.5; EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.5 | ||
| 28 | Roof support - Hydraulic control systems – Type A valves | Impact test Regulated area: Tests |
ČSN EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.6; EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.6 | ||
| 29 | Powered supports – hydraulic control systems – type A valves, individual reinforcement – hydraulic mine legs – valves | Pressure/flow behaviour test Regulated area: Tests |
ČSN EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.7; EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.7; ČSN 44 4450, příl. A.3.2, A.3.2.1, A.3.2.4; ČSN 44 4440, čl. 32 b) | ||
| 30 | Powered supports – hydraulic control systems – valves, individual reinforcement – hydraulic mine legs | Fatigue test Regulated area: Tests |
ČSN EN 1804-3, příl. A.1.1, A.1.3, A.1.3.8, A.1.4, A.1.4.1, A.1.4.6, A.1.5, A.1.5.1, A.1.5.4; EN 1804-3, příl. A.1.1, A.1.3, A.1.3.8, A.1.4, A.1.4.1, A.1.4.6, A.1.5, A.1.5.1, A.1.5.4; ČSN 44 4450, příl. A.3.2, A.3.2.1, A.3.2.6; ČSN 44 4440, čl. 33 | ||
| 31 | Roof support - Hydraulic control systems - valves | Back pressure resistance test Regulated area: Tests |
ČSN EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.9, A.1.4, A.1.4.1, A.1.4.4, A.1.5, A.1.5.1, A.1.5.5; EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.9, A.1.4, A.1.4.1, A.1.4.4, A.1.5, A.1.5.1, A.1.5.5 | ||
| 32 | Roof support - Hydraulic control systems | Switching test (Switching off) Regulated area: Tests |
ČSN EN 1804-3, příl. A.1.1, A.1.4, A.1.4.1, A.1.4.5, A.1.5, A.1.5.1, A.1.5.6; EN 1804-3, příl. A.1.1, A.1.4, A.1.4.1, A.1.4.5, A.1.5, A.1.5.1, A.1.5.6 | ||
| 33 | Roof supports for coal seams affected by rock bursts | Dynamic resistance test of hydraulic pit prop (support ram) – in cooperation with impact valve Regulated area: Tests |
ČSN 44 4450, příl. A.2.3, A.2.3.1 | ||
| 34 | Rubber and plastics hoses and hose assemblies | Static testing pressure test Regulated area: Tests |
ČSN EN ISO 1402, čl. 8.1; PN-G-32000:2011 | ||
| 35 | Rubber and plastics hoses and hose assemblies | Emergency pressure test Regulated area: Tests |
ČSN EN ISO 1402, čl. 8.3; PN-G-32000:2011 | ||
| 36 | Rubber and plastics hoses and hose assemblies | Leakage test Regulated area: Tests |
ČSN EN ISO 1402, čl. 8.4; PN-G-32000:2011 | ||
| 37 | Steel | Tensile test including sample preparation Regulated area: Tests |
ČSN EN ISO 6892-1; ČSN EN ISO 377 | ||
| 38 | Hydrostatic mechanisms and hydraulic control systems | Inspection of external appearance and determination of dimensions Regulated area: Tests |
ČSN 11 9008, čl. 4.2; ČSN 44 4450, příl. A.3.1.2 | ||
| 39 | Hydrostatic mechanical devices | Pressure strength test Regulated area: Tests |
ČSN 11 9008, čl. 4.4 | ||
| 40 | Hydrostatic mechanical devices | Functionality test Regulated area: Tests |
ČSN 11 9008, čl. 4.7 | ||
| 41 | Hydrostatic mechanisms | Safety test under cyclic hydraulic loading Regulated area: Tests |
ČSN 11 9008, čl. 4.9 | ||
| 42 | Machinery, equipment and parts thereof | Force load test Regulated area: Tests |
PP-42.04.03 | ||
| 43 | Steel support for use in mines | Force load test Regulated area: Tests |
ČSN 44 4410-3; PN-87/G-15000/10; ČSN 44 4410-1, čl. 5.3; STN 44 4410-1, čl. 5.3; ČSN 44 4410-4, čl. 5.2; STN 44 4410-4, čl. 5.2; DIN 21530-4, čl. 4.1.1.2.2.5, 4.1.2.2.2; UNE 22725, čl. 4.2.3; PN-G-15026:2017-4 | ||
| 44 | Steel mine studdles | Force loading test Regulated area: Tests |
DIN 21530-4, čl. 4.1.3.2.2, 4.1.3.2.3 | ||
| 45 | Screws and nuts | Force loading test Regulated area: Tests |
ČSN EN ISO 898-1, čl. 9.2, 9.7; ČSN EN ISO 898-2, čl. 9.1 | ||
| 46 | Mechanical legs | Force loading test Regulated area: Tests |
PN-G-15533, čl. 4.3.5 | ||
| 47 | Shackles | Force loading test – deflection measurement Regulated area: Tests |
PN-G-46696, čl. 3.6.4 | ||
| 48 | Mechanical joints of conveyor belts | Force loading test Regulated area: Tests |
ČSN EN ISO 1120, čl. 7 | ||
| 49 | Mine chains | Force loading test Regulated area: Tests |
ČSN 02 3203; ČSN 02 3215:1987; DIN 22252; DIN 20637, čl. 8.4, 8.5; DIN 685-3, čl. 7.4, 7.6 | ||
| 50 | Articulated steel mining joists | Force loading test Regulated area: Tests |
PP-42.01.03 (PN-G-15541; PN-G-15542; PN-G-15543; PN-G-15544; PN-G-15545; ON 44 4418:1982) | ||
| 51 | Permanent lifting magnets | Force loading test Regulated area: Tests |
SN EN 13155+A2, čl. 5.2.3.4.1 | ||
| 52 | Steel supports | Force load test with yield Regulated area: Tests |
ČSN 44 4410-4, čl. 5.1; STN 44 4410-4, čl. 5.1; DIN 21530-4, čl. 4.1.2.2.3; UNE 22725, čl. 4.2.2; PN-G-15026:2017-4 | ||
| 53 | Mechanical legs | Force load test with slippage Regulated area: Tests |
PN-G-15533, čl. 4.3.4, 4.3.6, 4.3.7 | ||
| 54 | Steel rope wires | Determination of diameter Regulated area: Tests |
ČSN 02 4301:1974, čl. 32, 54, 55; ČSN EN 10218-2 | ||
| 55 | Steel rope wires | Enumeration of bends Regulated area: Tests |
ČSN 02 4301:1974, čl. 36, 54, 55; ČSN ISO 7801 | ||
| 56 | Steel rope wires (up to wire Ø 5mm) | Enumeration of twists Regulated area: Tests |
ČSN 02 4301:1974, čl. 37, 54, 55; ČSN ISO 7800 | ||
| 57 | Steel wire linear ropes | Determination of total bearing capacity Regulated area: Tests |
ČSN 02 4301:1974, čl. 39, 40, 41, 43, 44; ČSN EN 12385-1+A1, čl. 6.4 | ||
| 58 | Steel wire ropes and ropes with eyes | Determination of diameter Regulated area: Tests |
ČSN 02 4301:1974, čl. 31; ČSN EN 12385-1+A1, čl. 6.3 | ||
| 59 | Steel ropes with eyes | Determination of actual load-bearing capacity Regulated area: Tests |
ČSN 02 4481:1981, čl. 21; ČSN 02 4468, čl. 5; ČSN EN 13411-3:2023 | ||
| 60 | Eyes of steel wire ropes | Determination of dimensions Regulated area: Tests |
ČSN 02 4481:1981, čl. 25, 26; ČSN EN 13411-3:2023 | ||
| 61 | Ferrules of wire ropes with eyes | Determination of overlap Regulated area: Tests |
ČSN 02 4481:1981, čl. 10; ČSN EN 13411-3:2023 | ||
| 62 | Sleeves of wire ropes with eyes | Determination of dimensions Regulated area: Tests |
ČSN 02 4481:1981, čl. 23, 24; ČSN EN 13411-3:2023 | ||
| 63 | Mobile working machines, stationary machines and equipment | Operating force measurement Regulated area: Tests |
PP-42.04.07 (ČSN EN 894-3+A1); NV č. 361/2007 Sb., příl. č. 8 a 9 | ||
| 64 | Mining steel reinforcement assemblies | Determination of mass of components Regulated area: Tests |
ČSN 44 4410-2, čl. 4.1 | ||
| 65 | Profile bars | Determination of weight of parts Regulated area: Tests |
ČSN 44 4410-1, čl. 5.1; STN 44 4410-1, čl. 5.1 | ||
| 66 | Articulated steel mine joists | Determination of weight of parts Regulated area: Tests |
PP-42.01.02, čl. 4.2.4 (ON 44 4418:1982) | ||
| 67 | Profile bars | Measurement of dimensions Regulated area: Tests |
ČSN 44 4410-1, čl. 5.2; STN 44 4410-1, čl. 5.2 | ||
| 68 | Mining steel reinforcement assemblies | Measurement of dimensions Regulated area: Tests |
ČSN 44 4410-2, čl. 4.2, 4.3, 4.4 | ||
| 69 | Connecting parts | Measurement of dimensions Regulated area: Tests |
ČSN 44 4410-3, čl. 4.1; PN-G-15011:2011 | ||
| 70 | Chains | Measurement of dimensions Regulated area: Tests |
DIN 22252, čl. 6.4.1; DIN 20637, čl. 8.3; DIN 685-3, čl. 7.3 | ||
| 71 | Articulated steel mine joists | Measurement of dimensions Regulated area: Tests |
PP-42.01.02, čl. 4.2.3 (ON 44 4418:1982) | ||
| 72 | Mechanised reinforcement section | Load tests Regulated area: Tests |
CONSOL Inc./rev. 1994 - Sekce B | ||
| 73 | Roof support | Design measurement of permanent deformation Regulated area: Tests |
CONSOL Inc./rev. 1994 - Sekce C; ČSN EN 1804-1, příl. B; EN 1804-1, příl. B | ||
| 74 | Metallic materials | Charpy pendulum impact test including sample preparation Regulated area: Tests |
ČSN ISO 148-1; ČSN EN ISO 377 | ||
| 75 | Mechanised reinforcement section | Load tests Regulated area: Tests |
GOST 31561, čl. 13.1, 13.5, 13.11, 13.12, 13.13, 13.14, 13.15, 13.16, 13.17, 13.20, 13.21, 13.22 | ||
| 76 | Mechanical and electrotechnical parts and assemblies | Test for resistance to simulated solar radiation Regulated area: Tests |
DIN 75220; PV 1211; PR 306.4; MIL-STD-810G, Meth. 505.5 Procedure II; VDA 230-219 | ||
| 77 | Mechanical and electrotechnical parts and assemblies, surface coatings and protections | Environmental testing Regulated area: Tests |
ČSN EN 60068-2-1; ČSN EN 60068-2-2; ČSN EN 60068-2-14; ČSN EN 60068-2-67; ČSN EN 60068-2-78; PV 1200; PV 2005, varianta A; ČSN EN ISO 9227; čl. 5.2.2 | ||
| 78 | Paints and varnishes | Environmental testing Regulated area: Tests |
ČSN EN ISO 6270-2; ČSN EN ISO 11997-1, Příloha A, B | ||
| 79 | Paints and varnishes and organic coatings, metallic and other inorganic coatings | Damage rating test Regulated area: Tests |
ČSN EN ISO 4628-1; ČSN EN ISO 4628-2; ČSN EN ISO 4628-3; ČSN EN ISO 4628-4; ČSN EN ISO 4628-5; ČSN EN ISO 4628-6; ČSN EN ISO 4628-8; ČSN EN ISO 4628-10 | ||
| Workplace Čermná ve Slezsku | |||||
| 80 | Mechanical and electrotechnical parts and assemblies, surface coatings and protections | Environmental testing Regulated area: Tests |
ČSN EN 60068-2-1; ČSN EN 60068-2-2; ČSN EN IEC 60068-2-11; ČSN EN 60068-2-14; ČSN EN 60068-2-30; ČSN EN IEC 60068-2-52; ČSN EN 60068-2-67; ČSN EN 60068-2-78; ČSN EN ISO 9227; LV 124, bod 9.1, K-01; LV 124, bod 9.2, K-02; LV 124, bod 9.3, K-03; LV 124, bod 9.4, K-04; LV 124, bod 9.6, K-06; LV 124, bod 9.7, K-07; LV 124, bod 9.8, K-08; LV 124, bod 9.9, K-09; LV 124, bod 9.14, K-014 | ||
| 81 | Road vehicle components | Environmental testing Regulated area: Tests |
PV 1200; PV 1209; PV 1210; PV 2005, varianta A; GMW 3286; GMW 14124, cyklus M | ||
| 82 | Paints and varnishes | Environmental testing Regulated area: Tests |
ČSN EN ISO 6270-2; ČSN EN ISO 11997-1, Příloha A, B; Qualicoat bod. 2.4.2.; Qualicoat bod. 2.11 | ||
| 83 | Corrosion of metals and alloys | Environmental testing Regulated area: Tests |
ČSN EN ISO 16701 | ||
| 84 | Mechanical properties of the object | Free fall test Regulated area: Tests |
LV 124, bod 8.1, M-01 | ||
| 85 | Mechanical and electrotechnical parts and assemblies | Cyclic life tests – temperature loading Regulated area: Tests |
LV 124, bod 11.1, L-01; LV 124, bod 11.2, L-02; LV 124, bod 11.3, L-03 | ||
| 86 | Metallic and other inorganic coatings | Damage rating test Regulated area: Tests |
ČSN EN ISO 10289 | ||
| 87 | Coatings | Determination of thickness Regulated area: Tests |
ČSN EN ISO 2808, met 7C; | ||
| 88 | Protective coatings, inorganic, metallic and other coatings | Determination of thickness Regulated area: Tests |
ČSN EN ISO 2178; bod 4.4 | ||
| 89 | Paints and varnishes and organic coatings; metallic and other inorganic coatings | Determination of the degree of degradation Regulated area: Tests |
ČSN EN ISO 4628-1; ČSN EN ISO 4628-2; ČSN EN ISO 4628-3; ČSN EN ISO 4628-4; ČSN EN ISO 4628-5; ČSN EN ISO 4628-6; ČSN EN ISO 4628-8; ČSN EN ISO 4628-10 | ||
| 90 | Paints and varnishes | Cross-cut test Regulated area: Tests |
ČSN EN ISO 2409 | ||
| 91 | Paints and varnishes | Rapid deformation test (impact resistance) Regulated area: Tests |
ASTM D 2794 | ||
| 92 | Paints and varnishes | Determination of gloss value at 60° without metal pigments Regulated area: Tests |
ČSN EN ISO 2813 | ||
| 93 | Paints and varnishes | Cupping test of resistance to cracking Regulated area: Tests |
ČSN EN ISO 1520 | ||
| 94 | Paints and varnishes | Bend test (cylindrical mandrel) Regulated area: Tests |
ČSN EN ISO 1519 | ||
| 95 | Paints and varnishes | Determination of resistance to filiform corrosion Regulated area: Tests |
ČSN EN ISO 4623-2 | ||
Reference standards (219)
ASTM D 2794
CONSOL Inc./rev. 1994 - Sekce B
CONSOL Inc./rev. 1994 - Sekce C
DIN 20637, čl. 8.3
DIN 20637, čl. 8.4, 8.5
DIN 21530-4, čl. 4.1.1.2.2.5, 4.1.2.2.2
DIN 21530-4, čl. 4.1.2.2.3
DIN 21530-4, čl. 4.1.3.2.2, 4.1.3.2.3
DIN 22252
DIN 22252, čl. 6.4.1
DIN 685-3, čl. 7.3
DIN 685-3, čl. 7.4, 7.6
DIN 75220
EN 1804-1, příl. A.1.1, A.1.2.1, A.1.2.2
EN 1804-1, příl. A.1.1, A.1.2.1, A5
EN 1804-1, příl. A.1.1, A.1.2.5
EN 1804-1, příl. A.1.1, A.1.3
EN 1804-1, příl. A.1.2.3
EN 1804-1, příl. A.1.2.4
EN 1804-1, příl. A.1.3.1, A.1.3.2, A.5
EN 1804-1, příl. A.4
EN 1804-1, příl. A.6
EN 1804-1, příl. B
EN 1804-1, čl. 4.1.2
EN 1804-1, čl. 4.2
EN 1804-2, příl. A.1.1, A.1.2.1
EN 1804-2, příl. A.1.1, A.1.2.2
EN 1804-2, příl. A.1.1, A.1.2.3, A.1.2.3.1
EN 1804-2, příl. A.1.1, A.1.2.3, A.1.2.3.2
EN 1804-2, příl. A.1.1, A.1.2.4
EN 1804-2, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.2
EN 1804-2, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.3
EN 1804-2, příl. A.1.1, A.1.4
EN 1804-2, příl. A.1.5
EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.3, A.1.3.4, A.1.4, A.1.4.1, A.1.4.3 A.1.5, A.1.5.1, A.1.5.3
EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.5
EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.6
EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.7
EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.9, A.1.4, A.1.4.1, A.1.4.4, A.1.5, A.1.5.1, A.1.5.5
EN 1804-3, příl. A.1.1, A.1.3, A.1.3.8, A.1.4, A.1.4.1, A.1.4.6, A.1.5, A.1.5.1, A.1.5.4
EN 1804-3, příl. A.1.1, A.1.4, A.1.4.1, A.1.4.5, A.1.5, A.1.5.1, A.1.5.6
EN 1804-3, příl. A1.1, A.1.3, A.1.3.1, A.1.3.2, A.1.4, A.1.4.1, A.1.4.2, A.1.5, A.1.5.1, A1.5.2
GMW 14124, cyklus M
GMW 3286
GOST 31561, čl. 13.1, 13.5, 13.11, 13.12, 13.13, 13.14, 13.15, 13.16, 13.17, 13.20, 13.21, 13.22
LV 124, bod 11.1, L-01
LV 124, bod 11.2, L-02
LV 124, bod 11.3, L-03
LV 124, bod 8.1, M-01
LV 124, bod 9.1, K-01
LV 124, bod 9.14, K-014
LV 124, bod 9.2, K-02
LV 124, bod 9.3, K-03
LV 124, bod 9.4, K-04
LV 124, bod 9.6, K-06
LV 124, bod 9.7, K-07
LV 124, bod 9.8, K-08
LV 124, bod 9.9, K-09
MIL-STD-810G, Meth. 505.5 Procedure II
NV č. 361/2007 Sb., příl. č. 8 a 9
ON 44 4418:1982
PN-87/G-15000/10
PN-G-15011:2011
PN-G-15026:2017-4
PN-G-15533, čl. 4.3.4, 4.3.6, 4.3.7
PN-G-15533, čl. 4.3.5
PN-G-15541
PN-G-15542
PN-G-15543
PN-G-15544
PN-G-15545
PN-G-32000:2011
PN-G-46696, čl. 3.6.4
PP - 42.03.06
PP-42.01.02, čl. 4.2.3
PP-42.01.02, čl. 4.2.4
PP-42.01.03
PP-42.04.03
PP-42.04.07
PR 306.4
PV 1200
PV 1209
PV 1210
PV 1211
PV 2005, varianta A
Qualicoat bod. 2.11
Qualicoat bod. 2.4.2.
SN EN 13155+A2, čl. 5.2.3.4.1
STN 44 4410-1, čl. 5.1
STN 44 4410-1, čl. 5.2
STN 44 4410-1, čl. 5.3
STN 44 4410-4, čl. 5.1
STN 44 4410-4, čl. 5.2
UNE 22725, čl. 4.2.2
UNE 22725, čl. 4.2.3
VDA 230-219
ČSN 02 3203
ČSN 02 3215:1987
ČSN 02 4301:1974, čl. 31
ČSN 02 4301:1974, čl. 32, 54, 55
ČSN 02 4301:1974, čl. 36, 54, 55
ČSN 02 4301:1974, čl. 37, 54, 55
ČSN 02 4301:1974, čl. 39, 40, 41, 43, 44
ČSN 02 4468, čl. 5
ČSN 02 4481:1981, čl. 10
ČSN 02 4481:1981, čl. 21
ČSN 02 4481:1981, čl. 23, 24
ČSN 02 4481:1981, čl. 25, 26
ČSN 11 9008, čl. 4.2
ČSN 11 9008, čl. 4.4
ČSN 11 9008, čl. 4.5
ČSN 11 9008, čl. 4.7
ČSN 11 9008, čl. 4.9
ČSN 44 4410-1, čl. 5.1
ČSN 44 4410-1, čl. 5.2
ČSN 44 4410-1, čl. 5.3
ČSN 44 4410-2, čl. 4.1
ČSN 44 4410-2, čl. 4.2, 4.3, 4.4
ČSN 44 4410-3
ČSN 44 4410-3, čl. 4.1
ČSN 44 4410-4, čl. 5.1
ČSN 44 4410-4, čl. 5.2
ČSN 44 4440, čl. 31
ČSN 44 4440, čl. 32 a)
ČSN 44 4440, čl. 32 b)
ČSN 44 4440, čl. 33
ČSN 44 4440, čl. 34
ČSN 44 4440, čl. 35
ČSN 44 4440, čl. 36
ČSN 44 4440, čl. 37
ČSN 44 4440, čl. 38
ČSN 44 4440, čl. 39
ČSN 44 4450, příl. A.1.1, A.1.2.1
ČSN 44 4450, příl. A.1.2.2
ČSN 44 4450, příl. A.2.1, A.2.1.1, A.2.2, A.2.2.1
ČSN 44 4450, příl. A.2.1, A.2.1.1, A.2.2, A.2.2.2, A.2.2.2.1
ČSN 44 4450, příl. A.2.1, A.2.1.1, A.2.2, A.2.2.3
ČSN 44 4450, příl. A.2.3, A.2.3.1
ČSN 44 4450, příl. A.3.1, A.3.2, A.3.2.1, A.3.2.2
ČSN 44 4450, příl. A.3.1, A.3.2, A.3.2.1, A.3.2.3, A.3.2.5
ČSN 44 4450, příl. A.3.1.2
ČSN 44 4450, příl. A.3.2, A.3.2.1, A.3.2.4
ČSN 44 4450, příl. A.3.2, A.3.2.1, A.3.2.6
ČSN 44 4450, čl. 5.1.2
ČSN EN 10218-2
ČSN EN 12385-1+A1, čl. 6.3
ČSN EN 12385-1+A1, čl. 6.4
ČSN EN 13411-3:2023
ČSN EN 1804-1, příl. A.1.1, A.1.2.1, A.1.2.2
ČSN EN 1804-1, příl. A.1.1, A.1.2.1, A5
ČSN EN 1804-1, příl. A.1.1, A.1.2.5
ČSN EN 1804-1, příl. A.1.1, A.1.3
ČSN EN 1804-1, příl. A.1.2.4
ČSN EN 1804-1, příl. A.1.3.1, A.1.3.2, A.5
ČSN EN 1804-1, příl. A.4
ČSN EN 1804-1, příl. A.6
ČSN EN 1804-1, příl. B
ČSN EN 1804-1, příl.A.1.2.3
ČSN EN 1804-1, čl. 4.1.2
ČSN EN 1804-1, čl. 4.2
ČSN EN 1804-2, příl. A.1.1, A.1.2.1
ČSN EN 1804-2, příl. A.1.1, A.1.2.2
ČSN EN 1804-2, příl. A.1.1, A.1.2.3, A.1.2.3.1
ČSN EN 1804-2, příl. A.1.1, A.1.2.3, A.1.2.3.2
ČSN EN 1804-2, příl. A.1.1, A.1.2.4
ČSN EN 1804-2, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.2
ČSN EN 1804-2, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.3
ČSN EN 1804-2, příl. A.1.1, A.1.4
ČSN EN 1804-2, příl. A.1.5
ČSN EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.3, A.1.3.4, A.1.4, A.1.4.1, A.1.4.3 A.1.5, A.1.5.1, A.1.5.3
ČSN EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.5
ČSN EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.6
ČSN EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.7
ČSN EN 1804-3, příl. A.1.1, A.1.3, A.1.3.1, A.1.3.9, A.1.4, A.1.4.1, A.1.4.4, A.1.5, A.1.5.1, A.1.5.5
ČSN EN 1804-3, příl. A.1.1, A.1.3, A.1.3.8, A.1.4, A.1.4.1, A.1.4.6, A.1.5, A.1.5.1, A.1.5.4
ČSN EN 1804-3, příl. A.1.1, A.1.4, A.1.4.1, A.1.4.5, A.1.5, A.1.5.1, A.1.5.6
ČSN EN 1804-3, příl. A1.1, A.1.3, A.1.3.1, A.1.3.2, A.1.4, A.1.4.1, A.1.4.2, A.1.5, A.1.5.1, A1.5.2
ČSN EN 60068-2-1
ČSN EN 60068-2-14
ČSN EN 60068-2-2
ČSN EN 60068-2-30
ČSN EN 60068-2-67
ČSN EN 60068-2-78
ČSN EN 894-3+A1
ČSN EN IEC 60068-2-11
ČSN EN IEC 60068-2-52
ČSN EN ISO 10289
ČSN EN ISO 1120, čl. 7
ČSN EN ISO 11997-1, Příloha A, B
ČSN EN ISO 1402, čl. 8.1
ČSN EN ISO 1402, čl. 8.3
ČSN EN ISO 1402, čl. 8.4
ČSN EN ISO 1519
ČSN EN ISO 1520
ČSN EN ISO 16701
ČSN EN ISO 2178; bod 4.4
ČSN EN ISO 2409
ČSN EN ISO 2808, met 7C
ČSN EN ISO 2813
ČSN EN ISO 2867
ČSN EN ISO 377
ČSN EN ISO 4623-2
ČSN EN ISO 4628-1
ČSN EN ISO 4628-10
ČSN EN ISO 4628-2
ČSN EN ISO 4628-3
ČSN EN ISO 4628-4
ČSN EN ISO 4628-5
ČSN EN ISO 4628-6
ČSN EN ISO 4628-8
ČSN EN ISO 6270-2
ČSN EN ISO 6892-1
ČSN EN ISO 898-1, čl. 9.2, 9.7
ČSN EN ISO 898-2, čl. 9.1
ČSN EN ISO 9227
ČSN EN ISO 9227; čl. 5.2.2
ČSN ISO 148-1
ČSN ISO 7800
ČSN ISO 7801