🇵🇱 INSTYTUT KOLEJNICTWA PL
材料与高分子电子与电磁兼容环境
INSTYTUT KOLEJNICTWA 是由 PCA 认可的实验室，认可编号 AB 369（Warszawa，波兰）。认可范围涵盖 70 项检测方法，涉及以下领域：材料与高分子、电子与电磁兼容、环境。检测对象包括：油漆配套体系、防腐涂层与覆盖层 E、金属结构制品与材料 E、钢轨扣件节点、非金属材料（玻璃与陶瓷除外）E。最常用的技术：FTIR method、Furniture calorimeter method、光学显微镜法。
要点速览
- 认可编号: PCA AB 369
- 认可范围内方法数: 70
- 检测对象种类: 24
- 所用技术数: 23
- 城市: Warszawa, 波兰
- 认可编号
- AB 369
- 认可机构
- PCA
- 地址
- LABORATORIUM BADAŃ MATERIAŁÓW I ELEMENTÓW KONSTRUKCJI, ul. Chłopickiego 50, 04-275 Warszawa
- 城市
- Warszawa, 波兰
该实验室检测什么 (24)
- 油漆配套体系、防腐涂层与覆盖层 E — 17 项方法
- 金属结构制品与材料 E — 7 项方法
- 钢轨扣件节点 — 7 项方法
- 非金属材料（玻璃与陶瓷除外）E — 6 项方法
- 金属与合金制结构制品与材料 E — 5 项方法
- 电气、电信与电子产品及装备/电缆与电线 E — 4 项方法
- Rail fastening system E — 3 项方法
- Metal structural products and materials — 2 项方法
- Products made of steel, cast iron and cast steel — 2 项方法
- Rails and rail joints E — 2 项方法
- Structural products and materials, Plastic products — 2 项方法
- Draw gear and its parts E — 1 项方法
- Non-metallic materials (excluding glass and ceramics) — 1 项方法
- Other products/ boarding aids for persons with reduced mobility E — 1 项方法
- Paint systems, anti-corrosion coatings and covers — 1 项方法
- 另有 9 项
所用检测技术 (23)
- FTIR method — 2 项方法
- Furniture calorimeter method — 2 项方法
- 光学显微镜法 — 2 项方法
- 单火焰法 — 2 项方法
- 电阻应变法 — 2 项方法
- 超声法 — 2 项方法
- 金相法 — 2 项方法
- Cone calorimeter method — 1 项方法
- Cross-cut method; X-cut method — 1 项方法
- Magnetic-inductive method — 1 项方法
- Method using an absorbent material; Immersion method — 1 项方法
- Oxygen index method — 1 项方法
- Pencil method — 1 项方法
- Pendulum damping method — 1 项方法
- Pull-off method — 1 项方法
- 另有 8 项
证书信息
- 签发日期
- 17.12.2025
- 版次
- 29
认可范围 — 项检测方法 (70)
| 序号 | 检测对象 | 方法 / 参数 | 技术 | 依据文件 | |
|---|---|---|---|---|---|
| 检测方法 | |||||
| 1 | 非金属材料（玻璃与陶瓷除外）E | Burning and smoke properties: Heat release rate Total heat release Mass loss rate Ignition time MARHE [kW/m2] Total smoke production SA1, SA2 |
Cone calorimeter method | ISO 5660-1 * | PN-EN 45545-2 | |
| 2 | 非金属材料（玻璃与陶瓷除外）E | Surface flammability: critical heat radiation flux CFE heat sustaining flaming combustion Qsb |
ISO 5658-2 * | ||
| 3 | 非金属材料（玻璃与陶瓷除外）E | Critical heat flux CHF, Heat flux HF-X | 辐射板法 | PN-EN ISO 9239-1 * | |
| 4 | 非金属材料（玻璃与陶瓷除外）E | Optical density of smoke DS., Specific optical density of smoke VOF | PN-EN ISO 5659-2 * | ||
| 5 | 非金属材料（玻璃与陶瓷除外）E | Standard toxicity index, CITG(-) | FTIR method | PN-EN 17084 Metoda 1 * | |
| 6 | 非金属材料（玻璃与陶瓷除外）E | Ignitability: flame reach [mm] ignition of the filter paper |
单火焰法 | PN-EN ISO 11925-2 * | |
| 7 | Solid, laminated and cellular plastics, flexible sheets and textile materials E | 可燃性 | Oxygen index method | PN-EN ISO 4589-2 * | |
| 8 | Plastics and other non-metallic materials E | 可燃性 flaming burning time afterglow time spread of flame and glowing occurrence of flaming droplets burn-through of the specimen failure surface |
单火焰法 | PN-EN 60695-11-10 * | |
| 9 | Rolling stock seats and berths E | Maximum average rate of heat emission, MARHE, Peak rate of heat release RHR Peak, Total smoke production, TSP, Flame height | Furniture calorimeter method | PN-EN 16989 * | |
| 10 | 电气、电信与电子产品及装备/电缆与电线 E | Smoke generation transmittance |
PN-EN 61034-2 * | ||
| 11 | 电气、电信与电子产品及装备/电缆与电线 E | Vertical flame spread on a single insulated wire or cable height of the charred zone and height of the unburnt zone, mm |
PN-EN 60332-1-2 * | ||
| 12 | 电气、电信与电子产品及装备/电缆与电线 E | Vertical flame spread on bunched wires or cables height of the charred zone at the front and at the back, m |
PN-EN 50305 * | PN-EN IEC 60332-3-24 | PN-EN IEC 60332-3-25 | ||
| 13 | 电气、电信与电子产品及装备/电缆与电线 E | Glow wire resistance – occurrence of ignition or glowing | PN-EN 60695-2-11 * | ||
| 14 | Rolling stock seats and berths | Maximum average rate of heat emission, MARHE, Peak rate of heat release RHR Peak, | Furniture calorimeter method | PN-EN 45545-2+A1:2015-12 Annex B * ISO/TR 9705-2:2001 | |
| 15 | Non-metallic materials (excluding glass and ceramics) | Standard toxicity index, CITG(-) | FTIR method | PN-EN 45545-2+A1:2015-12 Annex C * | |
| 16 | 油漆配套体系、防腐涂层与覆盖层 E | 中性盐雾（NSS）作用的耐受性 | PN-EN ISO 9227 | ASTM B117 | ||
| 17 | 油漆配套体系、防腐涂层与覆盖层 E | Flexibility of the paint coating mandrel diameter (2-32) mm | PN-EN ISO 1519 | ||
| 18 | 油漆配套体系、防腐涂层与覆盖层 E | Impact resistance – weight of 1000 g | PN-EN ISO 6272-1 | ||
| 19 | 油漆配套体系、防腐涂层与覆盖层 E | Thickness: 范围 (11,4 – 1018) μm |
Magnetic-inductive method | PN-EN ISO 2808 (metoda 7B.2) | PN-EN ISO 2178 | |
| 20 | 油漆配套体系、防腐涂层与覆盖层 E | Thickness: 范围 (11,4 – 1018) μm |
涡流法 | PN-EN ISO 2808 (metoda 7C) | PN-EN ISO 2360 | |
| 21 | 油漆配套体系、防腐涂层与覆盖层 E | Thickness: 范围 (2 – 2000) μm |
Wedge cut method | PN-EN ISO 2808 (metoda 6B) | |
| 22 | 油漆配套体系、防腐涂层与覆盖层 E | Effectiveness of the anti-graffiti coating | ASTM D6578 | ||
| 23 | 油漆配套体系、防腐涂层与覆盖层 E | 硬度 | Pencil method | PN-EN ISO 15184 | |
| 24 | 油漆配套体系、防腐涂层与覆盖层 E | 硬度 | Pendulum damping method | PN-EN ISO 1522 | |
| 25 | 油漆配套体系、防腐涂层与覆盖层 E | 粘结强度 | Cross-cut method; X-cut method | PN-EN ISO 2409 | PN-EN ISO 16276-2 | |
| 26 | 油漆配套体系、防腐涂层与覆盖层 E | 粘结强度 范围 (0,7 – 24,0) MPa |
Pull-off method | PN-EN ISO 4624 | |
| 27 | 油漆配套体系、防腐涂层与覆盖层 E | Resistance to liquids | Method using an absorbent material; Immersion method | PN-EN ISO 2812-3 | PN-EN ISO 2812-1 | |
| 28 | 油漆配套体系、防腐涂层与覆盖层 E | Evaluation of coating degradation in the scope of: overall assessment blistering, rusting, cracking, flaking, delamination and corrosion around a scratch or other artificial damage chalking by the tape method |
PN-EN ISO 4628-1 | PN-EN ISO 4628-2 | PN-EN ISO 4628-3 | PN-EN ISO 4628-4 | PN-EN ISO 4628-5 | PN-EN ISO 4628-6 | PN-EN ISO 4628-8 | ||
| 29 | 油漆配套体系、防腐涂层与覆盖层 E | 拉延性能 | PN-EN ISO 1520 | ||
| 30 | 油漆配套体系、防腐涂层与覆盖层 E | Resistance to the action of a light source | PN-EN ISO 16474-1 | PN-EN ISO 16474-2 | ||
| 31 | 油漆配套体系、防腐涂层与覆盖层 E | Resistance to an atmosphere with condensation of moisture | PN-EN ISO 6270-2 | ||
| 32 | 油漆配套体系、防腐涂层与覆盖层 E | Gloss (20 ̊ / 60 ̊ / 85 ̊) | PN-EN ISO 2813 | ||
| 33 | Paint systems, anti-corrosion coatings and covers | Colour (spherical geometry d/8) | PN-ISO 7724-1:2003 | PN-ISO 7724-2:2003 | PN-ISO 7724-3:2003 | ||
| 34 | Structural products and materials, Plastic products | Colour (spherical geometry d/8) | PN-EN ISO/CIE 11664-4:2019-08 | ||
| 35 | Structural products and materials, Plastic products | Resistance to the action of a light source | PN-EN ISO 4892-1:2025-04 | PN-EN ISO 4892-2:2013-06 | PN-EN ISO 4892-2:2013-06/A1:2022-01 | ||
| 36 | 金属与合金制结构制品与材料 E | 力学性能： Siła F, Granica plastyczności Re, Umowna granica plastyczności Rp, Wytrzymałość na rozciąganie Rm, Wydłużenie względne A, Przewężenie względne Z Siła do 250 kN 室温拉伸试验 |
PN-EN ISO 6892-1 metoda B | ||
| 37 | 金属与合金制结构制品与材料 E | 断裂功 范围 KV2; KU2; 锤的初始能量 150 J 试验温度 23±5°C; Próba udarności sposobem Charpy'ego |
PN-EN ISO 148-1 | ||
| 38 | 金属与合金制结构制品与材料 E | 布氏硬度 HBW 范围 średnica kulki: 2,5 mm; 10 mm |
布氏法 | PN-EN ISO 6506-1 | |
| 39 | 金属与合金制结构制品与材料 E | 维氏硬度 HV 范围 HV 5, HV 10, HV 30 |
维氏法 | PN-EN ISO 6507-1 | |
| 40 | 金属与合金制结构制品与材料 E | 洛氏硬度 HRC 范围 skala C |
洛氏法 | PN-EN ISO 6508-1 | |
| 41 | Wagon and traction bogie frames E | Strength of bogie frames of rail vehicles: static dynamic Complex load state applied up to a single load force value: from 20 to 250 kN, compression from 20 to 200 kN tension displacement max. ± 125 mm |
UIC Code 510-3 UIC Code 515-4 UIC Code 615-4 TSI CR WAG Załącznik J | PN-EN 13749 | ||
| 42 | Draw gear and its parts E | Strength of draw gear and its parts. Tensile strength: static - force range 0 – 2000 kN dynamic - force range 0 – 1500 kN |
PN-EN 15566 | ||
| 43 | Products made of steel, cast iron and cast steel E | 宏观组织，鲍曼硫印试验 | ISO 4968 | ||
| 44 | Prestressed concrete sleepers and bearers E | Static strength of the rail seat and centre sections, Dynamic strength of the rail seat section, Fatigue strength of the rail seat section; loading force up to 1600 kN, frequency up to 5 Hz | PN-EN 13230-2 | PN-EN 13230-4 | ||
| 45 | 塑料与橡胶制品 E | Static stiffness Sztywność dynamiczna; 力 do 100 kN |
PN-EN 13146-9 | ||
| 46 | Rail fastening system E | 纵向阻力 Opór na skręcanie 重复荷载的影响 Skutki trudnych warunków środowiska 压紧力 Sztywność statyczna Sztywność dynamiczna 力 do 250 kN |
PN-EN 13146-1 | PN-EN 13146-2 | PN-EN 13146-4 | PN-EN 13146-6 | PN-EN 13146-7 | PN-EN 13146-9 | ||
| 47 | Rail fastening system E | Pull-out strength / test load – force up to 160 kN | PN-EN 13146-10 | ||
| 48 | Rail fastening system E | 电阻 | PN-EN 13146-5 | ||
| 49 | 金属结构制品与材料 E | 不连续性 | 超声法 | PN-EN 16810 | PN-EN 13261 | PN-EN 13262 | PN-EN 17640 ID-17 | |
| 50 | 金属结构制品与材料 E | Residual stresses, MPa | 电阻应变法 | PN-EN 13261 | |
| 51 | 金属结构制品与材料 E | 表面不连续性 | 磁粉检测法 | PN-EN ISO 9934-1 | PN-EN ISO 17638 | PN-EN 1369 | PN-EN 10228-1 | |
| 52 | 金属结构制品与材料 E | Surface discontinuity | 渗透检测法 | PN-EN ISO 3452-1 | |
| 53 | Rails and rail joints E | Fatigue strength force up to 250 kN | PN-EN 13674-1 | PN-EN 14587-1 | PN-EN 14730-1 | ||
| 54 | Rails and rail joints E | Residual stress, MPa | 电阻应变法 | PN-EN 13674-1 | |
| 55 | Rails and rail joints in turnouts E | Fatigue strength force up to 250 kN | PN-EN 14587-2 Annex C.4.4 | PN-EN 14587-3 Annex D | ||
| 56 | 金属结构制品与材料 E | 显微组织 | 光学显微镜法 | PN-EN ISO 945-1 | PN-EN 13674-1 | |
| 57 | 金属结构制品与材料 E | Non-metallic inclusions (oxide cleanliness index K) | 金相法 | ISO 4967 | DIN 650 02 | PN-EN 13674-1 Annex F | |
| 58 | 金属结构制品与材料 E | Decarburization depth, mm | 金相法 | PN-EN 3887 | PN-EN 13674 | |
| 59 | Other products/ boarding aids for persons with reduced mobility E | Deflection under a test load of 300 kg, Friction coefficient, Mass, dimensions and geometry | PB-LK-B24 | ||
| 60 | Products made of steel, cast iron and cast steel | Macrostructure, Deep etching test | PN-57/H-04501 | ||
| 61 | Products made of steel, cast iron and cast steel | 宏观组织，鲍曼硫印试验 | PN-87/H-04514 | ||
| 62 | Metal structural products and materials | 显微组织 | 光学显微镜法 | PN-66/H-04505 | |
| 63 | Metal structural products and materials | 不连续性 | 超声法 | ISO 5948:1994 | |
| 64 | 钢轨扣件节点 | 纵向阻力 | PN-EN ISO 22074-2:2024-08 | ||
| 65 | 钢轨扣件节点 | 重复荷载的影响 | PN-EN ISO 22074-4:2024-08 | ||
| 66 | 钢轨扣件节点 | Effects of severe environmental conditions | PN-EN ISO 22074-6:2024-08 | ||
| 67 | 钢轨扣件节点 | 压紧力 | PN-EN ISO 22074-7:2024-08 | ||
| 68 | 钢轨扣件节点 | Static stiffness Sztywność dynamiczna 力 do 250 kN |
PN-EN ISO 22074-8:2024-08 | ||
| 69 | 钢轨扣件节点 | Pull-out strength / test load 力 do 160 kN |
PN-EN ISO 22074-3:2024-08 | ||
| 70 | 钢轨扣件节点 | 电阻 | PN-EN ISO 22074-5:2024-08 | ||
引用标准 (105)
ASTM B117
ASTM D6578
DIN 650 02
ISO 4967
ISO 4968
ISO 5658-2 *
ISO 5660-1 *
ISO 5948:1994
PB-LK-B24
PN-57/H-04501
PN-66/H-04505
PN-87/H-04514
PN-EN 10228-1
PN-EN 13146-1
PN-EN 13146-10
PN-EN 13146-2
PN-EN 13146-4
PN-EN 13146-5
PN-EN 13146-6
PN-EN 13146-7
PN-EN 13146-9
PN-EN 13230-2
PN-EN 13230-4
PN-EN 13261
PN-EN 13262
PN-EN 13674
PN-EN 13674-1
PN-EN 13674-1 Annex F
PN-EN 1369
PN-EN 13749
PN-EN 14587-1
PN-EN 14587-2 Annex C.4.4
PN-EN 14587-3 Annex D
PN-EN 14730-1
PN-EN 15566
PN-EN 16810
PN-EN 16989 *
PN-EN 17084 Metoda 1 *
PN-EN 17640 ID-17
PN-EN 3887
PN-EN 45545-2
PN-EN 45545-2+A1:2015-12 Annex B * ISO/TR 9705-2:2001
PN-EN 45545-2+A1:2015-12 Annex C *
PN-EN 50305 *
PN-EN 60332-1-2 *
PN-EN 60695-11-10 *
PN-EN 60695-2-11 *
PN-EN 61034-2 *
PN-EN IEC 60332-3-24
PN-EN IEC 60332-3-25
PN-EN ISO 11925-2 *
PN-EN ISO 148-1
PN-EN ISO 15184
PN-EN ISO 1519
PN-EN ISO 1520
PN-EN ISO 1522
PN-EN ISO 16276-2
PN-EN ISO 16474-1
PN-EN ISO 16474-2
PN-EN ISO 17638
PN-EN ISO 2178
PN-EN ISO 22074-2:2024-08
PN-EN ISO 22074-3:2024-08
PN-EN ISO 22074-4:2024-08
PN-EN ISO 22074-5:2024-08
PN-EN ISO 22074-6:2024-08
PN-EN ISO 22074-7:2024-08
PN-EN ISO 22074-8:2024-08
PN-EN ISO 2360
PN-EN ISO 2409
PN-EN ISO 2808 (metoda 6B)
PN-EN ISO 2808 (metoda 7B.2)
PN-EN ISO 2808 (metoda 7C)
PN-EN ISO 2812-1
PN-EN ISO 2812-3
PN-EN ISO 2813
PN-EN ISO 3452-1
PN-EN ISO 4589-2 *
PN-EN ISO 4624
PN-EN ISO 4628-1
PN-EN ISO 4628-2
PN-EN ISO 4628-3
PN-EN ISO 4628-4
PN-EN ISO 4628-5
PN-EN ISO 4628-6
PN-EN ISO 4628-8
PN-EN ISO 4892-1:2025-04
PN-EN ISO 4892-2:2013-06
PN-EN ISO 4892-2:2013-06/A1:2022-01
PN-EN ISO 5659-2 *
PN-EN ISO 6270-2
PN-EN ISO 6272-1
PN-EN ISO 6506-1
PN-EN ISO 6507-1
PN-EN ISO 6508-1
PN-EN ISO 6892-1 metoda B
PN-EN ISO 9227
PN-EN ISO 9239-1 *
PN-EN ISO 945-1
PN-EN ISO 9934-1
PN-EN ISO/CIE 11664-4:2019-08
PN-ISO 7724-1:2003
PN-ISO 7724-2:2003
PN-ISO 7724-3:2003
UIC Code 510-3 UIC Code 515-4 UIC Code 615-4 TSI CR WAG Załącznik J