🇵🇱 INSTYTUT TECHNOLOGII BEZPIECZEŃSTWA PL
材料与高分子水与废水
INSTYTUT TECHNOLOGII BEZPIECZEŃSTWA 是由 PCA 认可的实验室，认可编号 AB 154（Łódź，波兰）。认可范围涵盖 59 项检测方法，涉及以下领域：材料与高分子、水与废水。检测对象包括：平面纺织制品、Products coated with rubber or plastics、Prepacked products、Plastics used in personal protective equipment。最常用的技术：Visual assessment method、Constant load method;、Inductive method。
要点速览
- 认可编号: PCA AB 154
- 认可范围内方法数: 59
- 检测对象种类: 7
- 所用技术数: 5
- 城市: Łódź, 波兰
- 认可编号
- AB 154
- 认可机构
- PCA
- 地址
- „MORATEX”, LABORATORIUM BADAŃ METROLOGICZNYCH, ul. M. Skłodowskiej-Curie 3, 90-505 Łódź
- 城市
- Łódź, 波兰
该实验室检测什么 (7)
- 平面纺织制品 — 39 项方法
- Products coated with rubber or plastics — 8 项方法
- Prepacked products — 5 项方法
- Plastics used in personal protective equipment — 2 项方法
- Protective fragment- and bullet-resistant helmets — 2 项方法
- 医疗器械 — 2 项方法
- Plastic and rubber products: - isotropic and orthotropic fibre-reinforced plastic composites (mats, fabrics, woven rovings, chopped strands, combinations of such reinforcements, hybrids, rovings, short or milled fibres or pre-impregnated materials (prepregs) — 1 项方法
所用检测技术 (5)
- Visual assessment method — 9 项方法
- Constant load method; — 1 项方法
- Inductive method — 1 项方法
- Modified Martindale method — 1 项方法
- Shear box method — 1 项方法
实验室部门 (2)
- 计量检测实验室 — 58 项方法
- Metrological Testing Laboratory; CompositeLab Laboratory — 1 项方法
实验室地点
- LABORATORIUM BADAŃ METROLOGICZNYCH — ul. M. Skłodowskiej-Curie 3
- Pracownia Laboratorium CompositeLab — ul. M. Skłodowskiej-Curie 3; 90-505 Łódź
- Laboratorium Badań Metrologicznych; Pracownia Laboratorium CompositeLab —
认可范围 — 项检测方法 (59)
| 序号 | 检测对象 | 方法 / 参数 | 技术 | 依据文件 | |
|---|---|---|---|---|---|
| 计量检测实验室 | |||||
| 1 | Products coated with rubber or plastics | Coil width | PN-EN ISO 2286-1:2016-11 | ||
| 2 | Products coated with rubber or plastics | Mass per unit area | PN-EN ISO 2286-2:2016-11 | ||
| 3 | Products coated with rubber or plastics | 厚度 范围 (0,01 – 30) mm |
PN-EN ISO 2286-3:2016-11 | ||
| 4 | Products coated with rubber or plastics | Tensile strength and elongation at break 范围 (2 – 50000) N |
PN-EN ISO 1421:2017-02 | ||
| 5 | Products coated with rubber or plastics | Tear strength 范围 (2 – 20000) N |
PN-EN ISO 4674-1:2017-02 | PN-EN 1875-3:2023-07 | ||
| 6 | Products coated with rubber or plastics | Adhesion of the coating Testing range (2 – 20000) N |
PN-EN ISO 2411:2025-02 | ||
| 7 | Products coated with rubber or plastics | Watertightness Testing range (0,5 – 999) hPa |
PN-EN 1734:2000+Ap1:2002 | ||
| 8 | Products coated with rubber or plastics | Resistance to damage on bending | PN-EN ISO 7854:2002 metoda A | PN-EN ISO 7854:2002 metoda C | ||
| 9 | 平面纺织制品 | 宽度 | PN-EN 1773:2000 | ||
| 10 | 平面纺织制品 | Linear and areal density | PN-ISO 3801:1993 | PN-EN 12127:2000 | PN-EN ISO 9073-1:2023-11 | PN-P-04613:1997 | ||
| 11 | 平面纺织制品 | 厚度 范围 (0,01 – 30) mm 范围 (1 – 20) mm |
PN-EN ISO 5084:1999 | PN-EN ISO 9073-2:2002 metoda A | PN-EN ISO 9073-2:2002 metoda B | ||
| 12 | 平面纺织制品 | Number of threads per unit length, Number of courses and wales per unit length | PN-EN 1049-2:2000 | PN-EN ISO 7211-2:2025-03 | PN-EN 14971:2007 | ||
| 13 | 平面纺织制品 | Maximum force or breaking force 范围 (2 – 50000) N Wydłużenia względne przy maksymalnej sile lub sile zrywającej |
PN-EN ISO 13934-1:2013-07 | ||
| 14 | 平面纺织制品 | Breaking force 范围 (2 – 50000) N Wydłużenia względne przy sile zrywającej |
PN-EN ISO 9073-3:2023-11 | ||
| 15 | 平面纺织制品 | Tear force 范围 (2 – 20000) N |
PN-EN ISO 13937-2:2002 | PN-EN ISO 13937-3:2002 | PN-EN ISO 13937-4:2002 | PN-EN ISO 9073-4:2021-07 | ||
| 16 | 平面纺织制品 | Air permeability | PN-EN ISO 9237:1998 | ||
| 17 | 平面纺织制品 | Watertightness 范围 (0,5 – 2000) hPa |
PN-EN 20811:1997 | PN-EN ISO 811:2018-07 | ||
| 18 | 平面纺织制品 | Resistance to surface wetting | PN-EN ISO 4920:2013-02 | ||
| 19 | 平面纺织制品 | Resistance to rain | PN-91/P-04629 p. 2.2.1 | PN-EN 29865:1997 | ||
| 20 | 平面纺织制品 | Dimensional change in hot air 范围 (50 – 200) oC |
PBM-04/ITB:2024 edycja V-01.2024 | ||
| 21 | 平面纺织制品 | Change of dimensions after immersion in cold water | PN-ISO 7771:1994 | ||
| 22 | 平面纺织制品 | Dimensional change after washing and drying 范围 (30 – 92) °C |
PN-EN ISO 5077:2011 | ||
| 23 | 平面纺织制品 | Abrasion resistance on the Martindale apparatus | PN-EN ISO 12947-2:2017-02 | PN-EN ISO 12947-3:2001+AC:2006 | ||
| 24 | 平面纺织制品 | Propensity of the surface of a flat product to fuzzing and pilling | Modified Martindale method | PN-EN ISO 12945-2:2002 | PN-EN ISO 12945-2:2021-04 | |
| 25 | 平面纺织制品 | Propensity of the surface of a flat product to fuzzing and pilling | Shear box method | PN-EN ISO 12945-1:2002 | PN-EN ISO 12945-1:2021-04 | |
| 26 | 平面纺织制品 | Ignitability of vertically oriented specimens | PN-EN ISO 6940:2005 | PN-EN 1625:2002 | ||
| 27 | 平面纺织制品 | Flame spread on vertically mounted specimens | PN-EN ISO 6941:2005 | PN-EN 1624:2002 | ||
| 28 | 平面纺织制品 | Limited flame spread | PN-EN ISO 15025:2005 | PN-EN ISO 15025:2017-02 | ||
| 29 | 平面纺织制品 | Linear density of threads removed from the fabric | PN-88/P-04625 p. 2.4.2 | ||
| 30 | 平面纺织制品 | Maximum seam breaking force using: strip method; Testing range (2 – 20000) N grab method; Testing range (2 – 5000) N |
PN-EN ISO 13935-1:2014-06 | PN-EN ISO 13935-2:2014-06 | ||
| 31 | 平面纺织制品 | Resistance of yarns to slippage at a seam in woven fabrics. 范围 (2 – 5000) N |
Constant load method; | PN-EN ISO 13936-2:2005 | |
| 32 | 平面纺织制品 | Wrinkle recovery of flat textiles, Appearance of easy-care flat textiles after domestic washing and drying | PN-ISO 9867:1999 | PN-ISO 7768:2002 | ||
| 33 | 平面纺织制品 | Puncture resistance Testing range (2 – 20000) N |
PN-EN ISO 9073-5:2008 | PN-EN ISO 9073-5:2025-10 | PN-EN 863:1999 | ||
| 34 | 平面纺织制品 | Surface resistance Rezystywność powierzchniowa (z obliczeń) 测量范围 (2x103 – 2x1014) Ω Napięcie pomiarowe (10; 100; 250; 500) V |
PN-EN 1149-1:2008 | ||
| 35 | 平面纺织制品 | Volume resistance 测量范围 (2x103 – 2x1014) Ω Napięcie pomiarowe (10; 100; 250; 500) V |
PN-EN 1149-2:1999+Ap1:2001 | ||
| 36 | 平面纺织制品 | Charge decay time, Shielding factor | Inductive method | PN-EN 1149-3:2007 p. 4.3 | |
| 37 | 平面纺织制品 | Physiological properties: Water vapour resistance at temp. 35 °C and humidity 40% Thermal resistance at temp. 20 °C and humidity 65% |
PN-EN ISO 11092:2014-11 | ||
| 38 | 平面纺织制品 | Colour fastness to artificial light 范围 (1 – 8) stopni wg niebieskiej skali |
Visual assessment method | PN-EN ISO 105-B02:2014-11 metoda 2 | |
| 39 | 平面纺织制品 | Colour fastness to rubbing 范围 (1 – 5) stopni wg szarej skali |
Visual assessment method | PN-EN ISO 105-X12:2016-08 | |
| 40 | 平面纺织制品 | Colour fastness to the action of sweat Range (1 – 5) stopni wg szarej skali |
Visual assessment method | PN-EN ISO 105-E04:2013-06 | |
| 41 | 平面纺织制品 | Colour fastness to water 范围 (1 – 5) stopni wg szarej skali |
Visual assessment method | PN-EN ISO 105-E01:2013-06 | |
| 42 | 平面纺织制品 | Colour fastness to sea water 范围 (1 – 5) stopni wg szarej skali |
Visual assessment method | PN-EN ISO 105-E02:2013-06 | |
| 43 | 平面纺织制品 | Colour fastness to ironing 范围 (1 – 5) stopni wg szarej skali |
Visual assessment method | PN-EN ISO 105-X11:2000 | |
| 44 | 平面纺织制品 | Colour fastness to washing Zakres temperatur (40 – 95) °C 范围 (1 – 5) stopni wg szarej skali |
Visual assessment method | PN-EN ISO 105-C06:2010 | |
| 45 | 平面纺织制品 | Colour fastness to dry cleaning 范围 (1 – 5) stopni wg szarej skali |
Visual assessment method | PN-EN ISO 105-D01:2010 | |
| 46 | 平面纺织制品 | Colour fastness to organic solvents 范围 (1 – 5) stopni wg szarej skali |
Visual assessment method | PN-EN ISO 105-X05:1999 | |
| 47 | 平面纺织制品 | Oleophobicity – resistance test | PN-EN ISO 14419:2010 | ||
| 48 | Plastics used in personal protective equipment | Linear dimensions | PN-EN ISO 1923:1999 | ||
| 49 | Plastics used in personal protective equipment | Apparent density | PN-EN ISO 845:2010 | ||
| 50 | Prepacked products | Abrasion resistance of gloves | PN-EN 388+A1:2019-01 p. 6.1 | ||
| 51 | Prepacked products | Tear strength of gloves Testing range (2 – 20000) N |
PN-EN 388+A1:2019-01 p. 6.4 | ||
| 52 | Prepacked products | Puncture resistance of gloves Testing range (2 – 20000) N |
PN-EN 388+A1:2019-01 p. 6.5 | ||
| 53 | Prepacked products | Finger dexterity with the glove on | PN-EN ISO 21420:2020-09 p. 5.2 | ||
| 54 | Prepacked products | Glove size | PN-EN ISO 21420:2020-09 p. 5.1 | ||
| 55 | Protective fragment- and bullet-resistant helmets | Mass and dimensions | PBM-19/ITB:2025 edycja V-01.2025 w oparciu o PN-V-87001:2011 | ||
| 56 | Protective fragment- and bullet-resistant helmets | Clearance, External resistance of the coating, Resistance to water | PBM-19/ITB:2025 edycja V-01.2025 w oparciu o PN-V-87001:2011 | ||
| 57 | 医疗器械 | Watertightness Testing range (0,5 – 999) hPa |
PN-EN 13726-3:2005 | ||
| 58 | 医疗器械 | Moisture vapour transmission rate MVTR for a dressing in contact with water vapour for a dressing in contact with liquid |
PN-EN 13726-2:2005 | ||
| Metrological Testing Laboratory; CompositeLab Laboratory | |||||
| 59 | Plastic and rubber products: - isotropic and orthotropic fibre-reinforced plastic composites (mats, fabrics, woven rovings, chopped strands, combinations of such reinforcements, hybrids, rovings, short or milled fibres or pre-impregnated materials (prepregs) | Strength properties: tensile strength percentage elongation at fracture modulus of elasticity Load range do 100 kN |
PN-EN ISO 527-1:2020-01 | PN-EN ISO 527-4:2023-10 | ||
引用标准 (83)
PBM-04/ITB:2024 edycja V-01.2024
PBM-19/ITB:2025 edycja V-01.2025 w oparciu o PN-V-87001:2011
PN-88/P-04625 p. 2.4.2
PN-91/P-04629 p. 2.2.1
PN-EN 1049-2:2000
PN-EN 1149-1:2008
PN-EN 1149-2:1999+Ap1:2001
PN-EN 1149-3:2007 p. 4.3
PN-EN 12127:2000
PN-EN 13726-2:2005
PN-EN 13726-3:2005
PN-EN 14971:2007
PN-EN 1624:2002
PN-EN 1625:2002
PN-EN 1734:2000+Ap1:2002
PN-EN 1773:2000
PN-EN 1875-3:2023-07
PN-EN 20811:1997
PN-EN 29865:1997
PN-EN 388+A1:2019-01 p. 6.1
PN-EN 388+A1:2019-01 p. 6.4
PN-EN 388+A1:2019-01 p. 6.5
PN-EN 863:1999
PN-EN ISO 105-B02:2014-11 metoda 2
PN-EN ISO 105-C06:2010
PN-EN ISO 105-D01:2010
PN-EN ISO 105-E01:2013-06
PN-EN ISO 105-E02:2013-06
PN-EN ISO 105-E04:2013-06
PN-EN ISO 105-X05:1999
PN-EN ISO 105-X11:2000
PN-EN ISO 105-X12:2016-08
PN-EN ISO 11092:2014-11
PN-EN ISO 12945-1:2002
PN-EN ISO 12945-1:2021-04
PN-EN ISO 12945-2:2002
PN-EN ISO 12945-2:2021-04
PN-EN ISO 12947-2:2017-02
PN-EN ISO 12947-3:2001+AC:2006
PN-EN ISO 13934-1:2013-07
PN-EN ISO 13935-1:2014-06
PN-EN ISO 13935-2:2014-06
PN-EN ISO 13936-2:2005
PN-EN ISO 13937-2:2002
PN-EN ISO 13937-3:2002
PN-EN ISO 13937-4:2002
PN-EN ISO 1421:2017-02
PN-EN ISO 14419:2010
PN-EN ISO 15025:2005
PN-EN ISO 15025:2017-02
PN-EN ISO 1923:1999
PN-EN ISO 21420:2020-09 p. 5.1
PN-EN ISO 21420:2020-09 p. 5.2
PN-EN ISO 2286-1:2016-11
PN-EN ISO 2286-2:2016-11
PN-EN ISO 2286-3:2016-11
PN-EN ISO 2411:2025-02
PN-EN ISO 4674-1:2017-02
PN-EN ISO 4920:2013-02
PN-EN ISO 5077:2011
PN-EN ISO 5084:1999
PN-EN ISO 527-1:2020-01
PN-EN ISO 527-4:2023-10
PN-EN ISO 6940:2005
PN-EN ISO 6941:2005
PN-EN ISO 7211-2:2025-03
PN-EN ISO 7854:2002 metoda A
PN-EN ISO 7854:2002 metoda C
PN-EN ISO 811:2018-07
PN-EN ISO 845:2010
PN-EN ISO 9073-1:2023-11
PN-EN ISO 9073-2:2002 metoda A
PN-EN ISO 9073-2:2002 metoda B
PN-EN ISO 9073-3:2023-11
PN-EN ISO 9073-4:2021-07
PN-EN ISO 9073-5:2008
PN-EN ISO 9073-5:2025-10
PN-EN ISO 9237:1998
PN-ISO 3801:1993
PN-ISO 7768:2002
PN-ISO 7771:1994
PN-ISO 9867:1999
PN-P-04613:1997