🇵🇱 Uniwersytet Bielsko-Bialski PL

PCA AP 242 • Bielsko-Biała, Poland • 3 calibration items

Metrology & calibration

Uniwersytet Bielsko-Bialski is a calibration laboratory accredited by PCA under number AP 242 (Bielsko-Biała, Poland). Its accreditation scope covers 3 calibration items in the following areas: Metrology & calibration. Calibrated items include: Spatial gauges, Special gauges, Setting standards for external dimensions, Setting standards for internal dimensions. Most frequently used calibration principles: Internal procedure; Direct method or indirect method using coordina…, Internal procedure; Direct method or indirect method using coordina…, Internal procedure; Direct method or indirect method using coordina….

At a glance

  • Accreditation number: PCA AP 242
  • Calibration items in scope: 3
  • Types of calibrated items: 4
  • Calibration principles used: 3
  • City: Bielsko-Biała, Poland
  • Valid until: 11-10-2030
Accreditation number
AP 242
Accreditation body
PCA
Address
ul. Willowa 2, 43-309 Bielsko-Biała
City
Bielsko-Biała, Poland
Division
Metrology Laboratory
Valid until
11-10-2030

What this laboratory calibrates (4)

Calibration principles (3)

Certificate information

Issue date
12.10.2026
Issue no.
1
Certificate date
12.10.2026
Accreditation cycle
12.10.2026 — 11.10.2030
Approved by
Katarzyna Wiśniewska

Accreditation scope — calibration items (3)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 %. and is expressed in measurand units.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Setting standards for internal dimensions
Setting standards for external dimensions
Calibration — Length
up to 50 mm · CMC 0,8 µm 50 mm do 850 mm · CMC (1 + 5·L) µm; L - wielkość mierzona (m)
Length
Internal procedure; Direct method or indirect method using coordinate measuring machine contact or optical; At permanent location (S) PW-01
2 Spatial gauges
Special gauges
Calibration — Length (coordinate measurements)
0 mm to 850 mm · CMC (1 + 5·L) µm; L - measured value (m)
Length (coordinate measurements)
Internal procedure; Direct method or indirect method using coordinate measuring systems; At permanent location (S) PW-01
3 Spatial gauges
Special gauges
Calibration — Length (coordinate measurements)
0 mm do 1800 mm · CMC (9 + 22·L) µm; L - wielkość mierzona (m) 0° to 360° · CMC 20”
Length (coordinate measurements)
Internal procedure; Direct method or indirect method using coordinate measuring systems; At permanent location (S) and outside of it (P) PW-01

Reference standards (1)

PW-01

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20242