🇵🇱 Transportowy Dozór Techniczny PL
Metrology & calibration
Transportowy Dozór Techniczny is a calibration laboratory accredited by PCA under number AP 241 (Kraków, Poland). Its accreditation scope covers 3 calibration items in the following areas: Metrology & calibration. Calibrated items include: Callipers, Electronic pressure gauges, Spring pressure gauges, Step wedges for ultrasonic thickness gauges. Most frequently used calibration principles: Basic method according to clause 5.2.1; At permanent location (S), Internal procedure; At permanent location (S), Internal procedure; Direct method using gauge blocks and a digital….
At a glance
- Accreditation number: PCA AP 241
- Calibration items in scope: 3
- Types of calibrated items: 4
- Calibration principles used: 3
- City: Kraków, Poland
- Valid until: 09-07-2030
- Accreditation number
- AP 241
- Accreditation body
- PCA
- Address
- ul. Pocieszka 5, 31-408 Kraków
- City
- Kraków, Poland
- Division
- TDT Laboratory based in Kraków
- Valid until
- 09-07-2030
What this laboratory calibrates (4)
- Callipers — 1 calibration item
- Electronic pressure gauges — 1 calibration item
- Spring pressure gauges — 1 calibration item
- Step wedges for ultrasonic thickness gauges — 1 calibration item
Calibration principles (3)
- Basic method according to clause 5.2.1; At permanent location (S) — 1 calibration item
- Internal procedure; At permanent location (S) — 1 calibration item
- Internal procedure; Direct method using gauge blocks and a digital indicator; At permanent location (S) — 1 calibration item
Certificate information
- Issue date
- 10.07.2026
- Issue no.
- 1
- Certificate date
- 10.07.2026
- Accreditation cycle
- 10.07.2026 — 09.07.2030
- Approved by
- Katarzyna Wiśniewska
Accreditation scope — calibration items (3)
| No. | Calibrated quantity / subject of calibration | Nominal range / parameters / CMC | Calibration principle | Calibration procedure | |
|---|---|---|---|---|---|
| Calibration items | |||||
| 1 | Callipers | Calibration — Length 0 mm to 160 mm · CMC 14 µm Length |
Internal procedure; At permanent location (S) | IW-01 based on standard PN-EN ISO 13385-1:2019-12 | |
| 2 | Step wedges for ultrasonic thickness gauges | Calibration — Length 1 mm to 13 mm · CMC 11 µm Length |
Internal procedure; Direct method using gauge blocks and a digital indicator; At permanent location (S) | IW-03 | |
| 3 | Electronic pressure gauges Spring pressure gauges |
Calibration — Pressure gauge pressure (liquid) — 0 MPa to 0,25 MPa · CMC 0,0005 MPa gauge pressure (liquid) — 0 MPa to 60 MPa · CMC 0,2 % · p; P - measured value (MPa) Pressure |
Basic method according to clause 5.2.1; At permanent location (S) | EURAMET cg-17 v.4.1. | |
Reference standards (4)
EURAMET cg-17 v.4.1.
IW-01
IW-03
PN-EN ISO 13385-1:2019-12