🇵🇱 PRZEDSIĘBIORSTWO PRODUKCYJNO USŁUGOWO HANDLOWE "M.A.M." Marek Wróblewski PL

PCA AP 237 • Rzeszów, Poland • 5 calibration items

Metrology & calibration

PRZEDSIĘBIORSTWO PRODUKCYJNO USŁUGOWO HANDLOWE "M.A.M." Marek Wróblewski is a calibration laboratory accredited by PCA under number AP 237 (Rzeszów, Poland). Its accreditation scope covers 5 calibration items in the following areas: Metrology & calibration. Calibrated items include: Analogue dial gauges with scale interval, Analogue dial test indicators (lever type) with scale interval, Digital dial gauges with resolution, Plain plug gauges. Most frequently used calibration principles: Internal procedure; At permanent location (S).

At a glance

  • Accreditation number: PCA AP 237
  • Calibration items in scope: 5
  • Types of calibrated items: 5
  • Calibration principles used: 1
  • City: Rzeszów, Poland
  • Valid until: 09-02-2030
Accreditation number
AP 237
Accreditation body
PCA
Address
Al. gen. Leopolda Okulickiego 18, 35-206 Rzeszów
City
Rzeszów, Poland
Division
MAM Calibration Laboratory
Valid until
09-02-2030

What this laboratory calibrates (5)

Calibration principles (1)

Certificate information

Issue date
15.09.2026
Issue no.
2
Certificate date
15.09.2026
Accreditation cycle
10.02.2026 — 09.02.2030
Approved by
Katarzyna Wiśniewska

Accreditation scope — calibration items (5)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 %. The CMC uncertainty is expressed in measurand units.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Analogue dial gauges with scale interval Calibration — Length
scale interval 0,001 mm — 0 mm to 5 mm · CMC 1,2 μm scale interval 0,01 mm — 0 mm to 50 mm · CMC 1,4 μm
Length
Internal procedure; At permanent location (S) IN.WZ.10.11 based on PN-EN ISO 463:2007
2 Digital dial gauges with resolution Calibration — Length
resolution 0,001 mm — 0 mm to 60 mm · CMC 0,7 μm resolution 0,01 mm — 0 mm to 60 mm · CMC 5,8 μm
Length
Internal procedure; At permanent location (S) IN.WZ.10.15 based on PN-EN ISO 13102:2013
3 Analogue dial test indicators (lever type) with scale interval Calibration — Length
scale interval 0,001 mm — 0 mm to 0,2 mm · CMC 0,7 μm scale interval 0,002 mm — 0 mm to 0,4 mm · CMC 0,7 μm scale interval 0,01 mm — 0 mm to 1,6 mm · CMC 0,9 μm scale interval 0,02 mm — 0 mm to 2 mm · CMC 1,4 μm
Length
Internal procedure; At permanent location (S) IN.WZ.10.12 based on PN-EN ISO 9493:2010
4 Plain setting rings Calibration — Length
1 mm do 25 mm · CMC 1,2 μm 25 mm to 50 mm · CMC 1,3 μm 50 mm do 100 mm · CMC 1,5 μm
Length
Internal procedure; At permanent location (S) IN.WZ.10.1 based on EURAMET No.6 Wersja 3.0
5 Plain plug gauges Calibration — Length
1 mm to 50 mm · CMC 0,9 μm 50 mm to 100 mm · CMC 1,5 μm
Length
Internal procedure; At permanent location (S) IN.WZ.10.2 based on VDI/VDE/DGQ 2618 Blatt 4.1:2006-02

Reference standards (10)

EURAMET No.6 Wersja 3.0
IN.WZ.10.1
IN.WZ.10.11
IN.WZ.10.12
IN.WZ.10.15
IN.WZ.10.2
PN-EN ISO 13102:2013
PN-EN ISO 463:2007
PN-EN ISO 9493:2010
VDI/VDE/DGQ 2618 Blatt 4.1:2006-02

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20237