🇵🇱 AVIO-LAB Sp. z o.o. PL

PCA AP 218 • Mielec, Poland • 5 calibration items

Metrology & calibration

AVIO-LAB Sp. z o.o. is a calibration laboratory accredited by PCA under number AP 218 (Mielec, Poland). Its accreditation scope covers 5 calibration items in the following areas: Metrology & calibration. Calibrated items include: Setting rings, Cylindrical thread plug gauges, Measuring pins for holes, Plain plug gauges. Most frequently used calibration principles: Internal procedure; Calibration using the Mahr ULM 520 S-E length m…, Internal procedure; Calibration using the Mahr ULM 520 S-E length m…, Internal procedure; Calibration using the Mahr ULM 520 S-E length m….

At a glance

Accreditation number: PCA AP 218
Calibration items in scope: 5
Types of calibrated items: 4
Calibration principles used: 3
City: Mielec, Poland
Valid until: 07-03-2027

Accreditation number: AP 218
Accreditation body: PCA
Address: ul. Wojska Polskiego 9, 39-300 Mielec
City: Mielec, Poland
Division: Laboratorium Wzorcujące AVIO-LAB
Valid until: 07-03-2027

What this laboratory calibrates (4)

Setting rings — 2 calibration items
Cylindrical thread plug gauges — 1 calibration item
Measuring pins for holes — 1 calibration item
Plain plug gauges — 1 calibration item

Calibration principles (3)

Internal procedure; Calibration using the Mahr ULM 520 S-E length measuring machine; At permanent location (S) — 3 calibration items
Internal procedure; Calibration using the Mahr ULM 520 S-E length measuring machine with a measuring head; At permanent location (S) — 1 calibration item
Internal procedure; Calibration using the Mahr ULM 520 S-E length measuring machine with measuring bows; At permanent location (S) — 1 calibration item

Certificate information

Issue date: 13.05.2025
Issue no.: 3
Certificate date: 13.05.2025
Accreditation cycle: 08.03.2023 — 07.03.2027
Approved by: Tadeusz Matras

Accreditation scope — calibration items (5)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Cylindrical thread plug gauges	Calibration — Length 1 mm to 100 mm · CMC 2,8 µm 100 mm to 300 mm · CMC 3,4 µm Length	Internal procedure; Calibration using the Mahr ULM 520 S-E length measuring machine; At permanent location (S)	IW-06
2	Setting rings	Calibration — Length 1 mm do 25 mm · CMC 1,0 µm 25 mm to 50 mm · CMC 1,1 µm Length	Internal procedure; Calibration using the Mahr ULM 520 S-E length measuring machine with a measuring head; At permanent location (S)	IW-07
3	Setting rings	Calibration — Length 13 mm do 25 mm · CMC 0,8 µm 25 mm to 50 mm · CMC 0,9 µm 50 mm do 100 mm · CMC 1,2 µm 100 mm do 150 mm · CMC 2,0 µm 150 mm do 200 mm · CMC 2,8 µm 200 mm do 300 mm · CMC 3,6 µm Length	Internal procedure; Calibration using the Mahr ULM 520 S-E length measuring machine with measuring bows; At permanent location (S)	IW-07
4	Plain plug gauges	Calibration — Length 1 mm to 50 mm · CMC 0,4 µm 50 mm to 100 mm · CMC 0,9 µm 100 mm to 200 mm · CMC 2,1 µm 200 mm to 300 mm · CMC 3,5 µm 0,04” to 2” · CMC 0,000016” 2” to 4” · CMC 0,000035” 4” to 8” · CMC 0,000083” 8” to 12” · CMC 0,00014” Length	Internal procedure; Calibration using the Mahr ULM 520 S-E length measuring machine; At permanent location (S)	IW-05
5	Measuring pins for holes	Calibration — Length 0,17 mm to 30 mm · CMC 0,4 µm 0,007” to 1,2” · CMC 0,000016” Length	Internal procedure; Calibration using the Mahr ULM 520 S-E length measuring machine; At permanent location (S)	IW-05

Reference standards (3)

IW-05

IW-06

IW-07

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20218