🇵🇱 DB Cargo Polska S.A. PL

PCA AP 217 • Rybnik, Poland • 6 calibration items

Metrology & calibration

DB Cargo Polska S.A. is a calibration laboratory accredited by PCA under number AP 217 (Rybnik, Poland). Its accreditation scope covers 6 calibration items in the following areas: Metrology & calibration. Calibrated items include: 90° two-arm squares, Analog dial indicators with scale interval of 0,01 mm, Calipers, External micrometers. Most frequently used calibration principles: Internal procedure; Direct method using gauge blocks; At permanent…, At permanent location (S), Internal procedure; Direct measurement method; At permanent locatio….

At a glance

Accreditation number: PCA AP 217
Calibration items in scope: 6
Types of calibrated items: 6
Calibration principles used: 5
City: Rybnik, Poland
Valid until: 16-04-2027

Accreditation number: AP 217
Accreditation body: PCA
Address: ul. Włościańska 5, 44-251 Rybnik
City: Rybnik, Poland
Division: Calibration laboratory
Valid until: 16-04-2027

What this laboratory calibrates (6)

90° two-arm squares — 1 calibration item
Analog dial indicators with scale interval of 0,01 mm — 1 calibration item
Calipers — 1 calibration item
External micrometers — 1 calibration item
Feeler gauges — 1 calibration item
Measuring tapes — 1 calibration item

Calibration principles (5)

Internal procedure; Direct method using gauge blocks; At permanent location (S) — 2 calibration items
At permanent location (S) — 1 calibration item
Internal procedure; Direct measurement method; At permanent location (S) — 1 calibration item
Internal procedure; Indirect method using a cylindrical square and gauge blocks; At permanent location (S) — 1 calibration item
Internal procedure; Indirect method using a rigid rule; At permanent location (S) — 1 calibration item

Certificate information

Issue date: 28.04.2025
Issue no.: 2
Certificate date: 17.04.2023
Accreditation cycle: 17.04.2023 — 16.04.2027
Approved by: Katarzyna Wiśniewska

Accreditation scope — calibration items (6)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Analog dial indicators with scale interval of 0,01 mm	Calibration — Length 0 mm to 10 mm · CMC 4 µm Length	At permanent location (S)	PN-EN ISO 463:2007
2	External micrometers	Calibration — Length 0 mm to 25 mm · CMC 1,3 µm 25 mm to 50 mm · CMC 1,7 µm 50 mm to 75 mm · CMC 2,2 µm 75 mm to 100 mm · CMC 3,4 µm 100 mm to 125 mm · CMC 4,2 µm 125 mm to 150 mm · CMC 5,1 µm Length	Internal procedure; Direct method using gauge blocks; At permanent location (S)	I7.4.4
3	Measuring tapes	Calibration — Length 0 mm to 5000 mm · CMC (0,01 · L + 0,56) mm; L – measured value (m) Length	Internal procedure; Indirect method using a rigid rule; At permanent location (S)	I7.4.2
4	Calipers	Calibration — Length 0 mm to 150 mm · CMC 8 µm 0 mm to 300 mm · CMC 10 µm Length	Internal procedure; Direct method using gauge blocks; At permanent location (S)	I7.4.1
5	Feeler gauges	Calibration — Length 0,02 mm to 2 mm · CMC 2 µm Length	Internal procedure; Direct measurement method; At permanent location (S)	I-4.8.3-12/LW
6	90° two-arm squares	Calibration — Angle 10 mm to 315 mm · CMC 6 µm Angle	Internal procedure; Indirect method using a cylindrical square and gauge blocks; At permanent location (S)	I7.4.3

Reference standards (6)

I-4.8.3-12/LW

I7.4.1

I7.4.2

I7.4.3

I7.4.4

PN-EN ISO 463:2007

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20217