🇵🇱 THERMOCONTROL Sp. z o.o. PL

PCA AP 208 • Krosno, Poland • 5 calibration items

Metrology & calibration

THERMOCONTROL Sp. z o.o. is a calibration laboratory accredited by PCA under number AP 208 (Krosno, Poland). Its accreditation scope covers 5 calibration items in the following areas: Metrology & calibration. Calibrated items include: Temperature indicators including temperature controllers, Temperature recorders, Temperature simulators, Furnaces. Most frequently used calibration principles: Direct method; At permanent location (S) and outside of it (P), Electric indirect method; At permanent location (S) and outside of…, Direct method; Outside of permanent location (P).

At a glance

Accreditation number: PCA AP 208
Calibration items in scope: 5
Types of calibrated items: 8
Calibration principles used: 3
City: Krosno, Poland
Valid until: 22-06-2030

Accreditation number: AP 208
Accreditation body: PCA
Address: ul. Gen. Leopolda Okulickiego 1A/9, 38-400 Krosno
City: Krosno, Poland
Division: Laboratorium Wzorcujące THERMOCONTROL
Valid until: 22-06-2030

What this laboratory calibrates (8)

Temperature indicators including temperature controllers — 2 calibration items
Temperature recorders — 2 calibration items
Temperature simulators — 2 calibration items
Furnaces — 1 calibration item
Liquid thermostats — 1 calibration item
Temperature indicators (meters) compatible with resistance sensors — 1 calibration item
Temperature indicators (meters) compatible with thermoelectric sensors — 1 calibration item
Thermostatic chambers — 1 calibration item

Calibration principles (3)

Direct method; At permanent location (S) and outside of it (P) — 2 calibration items
Electric indirect method; At permanent location (S) and outside of it (P) — 2 calibration items
Direct method; Outside of permanent location (P) — 1 calibration item

Certificate information

Issue date: 27.05.2026
Issue no.: 7
Certificate date: 23.06.2022
Accreditation cycle: 27.05.2026 — 22.06.2030
Approved by: Katarzyna Wiśniewska

Accreditation scope — calibration items (5)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in the units of the measured quantity.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Temperature simulators Temperature indicators (meters) compatible with thermoelectric sensors Temperature indicators including temperature controllers Temperature recorders	Calibration — Electric quantity simulation -100 °C to 1820 °C · CMC 0,5 °C Electric quantity simulation	Electric indirect method; At permanent location (S) and outside of it (P)	EURAMET cg-11 v.2.0
2	Temperature simulators Temperature indicators (meters) compatible with resistance sensors Temperature indicators including temperature controllers Temperature recorders	Calibration — Electric quantity simulation -100 °C to 850 °C · CMC 0,2 °C Electric quantity simulation	Electric indirect method; At permanent location (S) and outside of it (P)	EURAMET cg-11 v.2.0
3	Thermostatic chambers	Calibration — Temperature (electric thermometry) -80 °C to 300 °C · CMC 2,5 °C Temperature (electric thermometry)	Direct method; At permanent location (S) and outside of it (P)	EURAMET cg-20 v.5.0
4	Furnaces	Calibration — Temperature (electric thermometry) 30 °C to 400 °C · CMC 2,5 °C 400 °C to 1200 °C · CMC 2,6 °C 1200 °C to 1330 °C · CMC 2,8 °C Temperature (electric thermometry)	Direct method; At permanent location (S) and outside of it (P)	EURAMET cg-20 v.5.0
5	Liquid thermostats	Calibration — Temperature (electric thermometry) 0 °C to 140 °C · CMC 2,5 °C Temperature (electric thermometry)	Direct method; Outside of permanent location (P)	EURAMET cg-20 v.5.0

Reference standards (2)

EURAMET cg-11 v.2.0

EURAMET cg-20 v.5.0

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20208