🇵🇱 Endress+Hauser Polska Sp. z o.o. PL

PCA AP 200 • Wrocław, Poland • 10 calibration items

Metrology & calibration

Endress+Hauser Polska Sp. z o.o. is a calibration laboratory accredited by PCA under number AP 200 (Wrocław, Poland). Its accreditation scope covers 10 calibration items in the following areas: Metrology & calibration. Calibrated items include: Pressure transducers, Mass flowmeters, Electrical thermometers (including electronic), Electrical thermometers (with temperature recording). Most frequently used calibration principles: Internal procedure; At permanent location (S) and outside of it (P), Internal procedure; At permanent location (S), Internal procedure; Outside of permanent location (P).

At a glance

Accreditation number: PCA AP 200
Calibration items in scope: 10
Types of calibrated items: 8
Calibration principles used: 4
City: Wrocław, Poland
Valid until: 07-11-2029

Accreditation number: AP 200
Accreditation body: PCA
Address: ul. Wołowska 11, 51-116 Wrocław
City: Wrocław, Poland
Valid until: 07-11-2029

What this laboratory calibrates (8)

Pressure transducers — 4 calibration items
Mass flowmeters — 2 calibration items
Electrical thermometers (including electronic) — 1 calibration item
Electrical thermometers (with temperature recording) — 1 calibration item
Electromagnetic flowmeters — 1 calibration item
Resistance thermometer sensors — 1 calibration item
Temperature transmitters (including temperature sensors) — 1 calibration item
Vortex flowmeters — 1 calibration item

Calibration principles (4)

Internal procedure; At permanent location (S) and outside of it (P) — 4 calibration items
Internal procedure; At permanent location (S) — 3 calibration items
Internal procedure; Outside of permanent location (P) — 2 calibration items
Internal procedure; Direct comparison method; At permanent location (S) and outside of it (P) — 1 calibration item

Certificate information

Issue date: 13.08.2026
Issue no.: 6
Certificate date: 08.11.2021
Accreditation cycle: 16.10.2025 — 07.11.2029
Approved by: Katarzyna Wiśniewska

Accreditation scope — calibration items (10)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units. The measurement uncertainty value for CMC expressed as a percentage is a relative measurement uncertainty and refers to a percentage contribution in the value of the measurand.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Electromagnetic flowmeters Mass flowmeters Vortex flowmeters	Calibration — Volume flow rate (flow – liquids) 0,1 m³/h to 60 m³/h · CMC 0,20 % of reading Volume flow rate (flow – liquids)	Internal procedure; At permanent location (S)	EH-PW-04-AKR
2	Mass flowmeters	Calibration — Mass flow rate (flow – liquids) 100 kg/h to 30000 kg/h · CMC 0,13 % of reading Mass flow rate (flow – liquids)	Internal procedure; Direct comparison method; At permanent location (S) and outside of it (P)	EH-PW-01-AKR
3	Pressure transducers	Calibration — Pressure gauge pressure (gas medium) — -90 kPa to 0 kPa · CMC 0,045 kPa gauge pressure (gas medium) — 0 kPa to 2,5 kPa · CMC 0,00125 kPa gauge pressure (gas medium) — 2,5 kPa to 100 kPa · CMC 0,050 kPa gauge pressure (gas medium) — 100 kPa to 1000 kPa · CMC 0,50 kPa gauge pressure (gas medium) — 1000 kPa to 10000 kPa · CMC 5,0 kPa Pressure	Internal procedure; At permanent location (S)	EH-PW-02-AKR w oparciu o EURAMET cg 17 v 4.1 Metoda 5.2.1 i 5.2.2
4	Pressure transducers	Calibration — Pressure gauge pressure (gas medium) — -90 kPa to 0 kPa · CMC 0,052 kPa gauge pressure (gas medium) — 0 kPa to 7 kPa · CMC 0,0040 kPa gauge pressure (gas medium) — 7 kPa to 100 kPa · CMC 0,051 kPa gauge pressure (gas medium) — 100 kPa to 2000 kPa · CMC 1,0 kPa Pressure	Internal procedure; Outside of permanent location (P)	EH-PW-02-AKR w oparciu o EURAMET cg 17 v 4.1 Metoda 5.2.1 i 5.2.2
5	Pressure transducers	Calibration — Pressure absolute pressure (gas medium) — 0 kPa to 100 kPa · CMC 0,050 kPa absolute pressure (gas medium) — 100 kPa to 1000 kPa · CMC 0,50 kPa absolute pressure (gas medium) — 1000 kPa to 10000 kPa · CMC 5,0 kPa Pressure	Internal procedure; At permanent location (S)	EH-PW-02-AKR w oparciu o EURAMET cg 17 v 4.1 Metoda 5.2.1 i 5.2.2
6	Pressure transducers	Calibration — Pressure absolute pressure (gas medium) — 0 kPa to 2000 kPa · CMC 1,1 kPa Pressure	Internal procedure; Outside of permanent location (P)	EH-PW-02-AKR w oparciu o EURAMET cg 17 v 4.1 Metoda 5.2.1 i 5.2.2
7	Resistance thermometer sensors	Calibration — Temperature (electrical thermometry) -20 °C to 150 °C · CMC 0,1 °C 150 °C to 350 °C · CMC 0,31 °C Temperature (electrical thermometry)	Internal procedure; At permanent location (S) and outside of it (P)	EH-PW-03-AKR
8	Temperature transmitters (including temperature sensors)	Calibration — Temperature (electrical thermometry) -20 °C to 150 °C · CMC 0,13 °C 150 °C to 350 °C · CMC 0,41 °C Temperature (electrical thermometry)	Internal procedure; At permanent location (S) and outside of it (P)	EH-PW-03-AKR
9	Electrical thermometers (including electronic)	Calibration — Temperature (electrical thermometry) -20 °C to 150 °C · CMC 0,13 °C 150 °C to 350 °C · CMC 0,41 °C Temperature (electrical thermometry)	Internal procedure; At permanent location (S) and outside of it (P)	EH-PW-03-AKR
10	Electrical thermometers (with temperature recording)	Calibration — Temperature (electrical thermometry) -20 °C to 150 °C · CMC 0,13 °C 150 °C to 350 °C · CMC 0,41 °C Temperature (electrical thermometry)	Internal procedure; At permanent location (S) and outside of it (P)	EH-PW-03-AKR

Reference standards (5)

EH-PW-01-AKR

EH-PW-02-AKR

EH-PW-03-AKR

EH-PW-04-AKR

EURAMET cg 17 v 4.1

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20200