🇵🇱 Tabor Dębica Sp. z o.o. PL

PCA AP 199 • Dębica, Poland • 13 calibration items

Metrology & calibration

Tabor Dębica Sp. z o.o. is a calibration laboratory accredited by PCA under number AP 199 (Dębica, Poland). Its accreditation scope covers 13 calibration items in the following areas: Metrology & calibration. Calibrated items include: External micrometers, – resolution 0.0001 mm, Feeler gauges, Instruments for measuring the distance between inner faces of wheel…. Most frequently used calibration principles: Internal procedure; Direct method using gauge blocks; At permanent…, Internal procedure; Direct method using a digital micrometer; At pe…, Internal procedure; Direct method using a horizontal length measuri….

At a glance

  • Accreditation number: PCA AP 199
  • Calibration items in scope: 13
  • Types of calibrated items: 13
  • Calibration principles used: 4
  • City: Dębica, Poland
  • Valid until: 11-10-2029
Accreditation number
AP 199
Accreditation body
PCA
Address
ul. Sandomierska 39, 39-200 Dębica
City
Dębica, Poland
Valid until
11-10-2029

What this laboratory calibrates (13)

Calibration principles (4)

Certificate information

Issue date
22.09.2025
Issue no.
6
Certificate date
12.10.2021
Accreditation cycle
22.09.2025 — 11.10.2029
Approved by
Katarzyna Wiśniewska

Accreditation scope — calibration items (13)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units. A CMC uncertainty value expressed as a percentage is the relative measurement uncertainty and refers to the percentage of the value of the measurand.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Vernier depth gauges Calibration — Length
0 mm to 150 mm · CMC 8,0 µm 0 mm to 300 mm · CMC 11,0 µm 0 mm to 500 mm · CMC 18,0 µm
Length
Internal procedure; Direct method using gauge blocks; At permanent location (S) PW_06
2 Ultrasonic thickness gauges Calibration — Length
0 mm to 50 mm · CMC 8,0 µm
Length
Internal procedure; Direct method using gauge blocks; At permanent location (S) PW_12
3 Instruments for measuring the distance between inner faces of wheelset wheels Calibration — Length
1330 mm to 1380 mm · CMC 0,16 mm
Length
Internal procedure; Direct method using a horizontal length measuring machine; At permanent location (S) PW_04
4 Instruments for measuring the running circle diameter of wheelset wheels Calibration — Length
600 mm to 800 mm · CMC 0,06 mm 800 mm to 1050 mm · CMC 0,06 mm 1050 mm to 1260 mm · CMC 0,08 mm
Length
Internal procedure; Direct method using a horizontal length measuring machine; At permanent location (S) PW_05
5 Vernier callipers Calibration — Length
0 mm to 150 mm · CMC 8,0 µm 0 mm to 300 mm · CMC 11,0 µm 0 mm to 500 mm · CMC 18,0 µm
Length
Internal procedure; Direct method using gauge blocks; At permanent location (S) PW_03
6 Vernier height gauges Calibration — Length
0 mm to 150 mm · CMC 8,0 µm 0 mm to 300 mm · CMC 11,0 µm 0 mm to 500 mm · CMC 16,0 µm
Length
Internal procedure; Direct method using gauge blocks; At permanent location (S) PW_02
7 Feeler gauges Calibration — Length
- leaf — 0,02 mm to 3 mm · CMC 2,0 µm - step — 0 mm to 25 mm · CMC 4,0 µm
Length
Internal procedure; Direct method using a digital micrometer; At permanent location (S) PW_07, PW_08
8 Step blocks for ultrasonic thickness gauges Calibration — Length
0 mm to 25 mm · CMC 3,0 µm
Length
Internal procedure; Direct method using a digital micrometer; At permanent location (S) PW_09
9 Reference foils Calibration — Length
0 mm to 1,5 mm · CMC 2,3 µm 1,5 mm to 5 mm · CMC 4,8 µm 5 mm to 10 mm · CMC 8,9 µm 10 mm to 15 mm · CMC 16,1 µm 15 mm to 20 mm · CMC 24 µm 20 mm to 25 mm · CMC 32 µm
Length
Internal procedure; Direct method using a digital micrometer; At permanent location (S) PW_10
10 Micrometer depth gauges Calibration — Length
0 mm to 25 mm · CMC 1,0 µm 25 mm to 50 mm · CMC 1,3 µm 50 mm to 75 mm · CMC 1,6 µm 75 mm to 100 mm · CMC 1,9 µm 100 mm to 125 mm · CMC 2,2 µm 125 mm to 150 mm · CMC 2,6 µm 150 mm to 175 mm · CMC 2,9 µm 175 mm to 200 mm · CMC 3,2 µm
Length
Internal procedure; Direct method using gauge blocks; At permanent location (S) PW_11
11 External micrometers Calibration — Length
0 mm to 25 mm · CMC 0,9 µm 25 mm to 50 mm · CMC 1,2 µm 50 mm to 75 mm · CMC 1,5 µm 75 mm to 100 mm · CMC 1,8 µm 100 mm to 125 mm · CMC 2,1 µm 125 mm to 150 mm · CMC 2,5 µm 150 mm to 175 mm · CMC 2,8 µm 175 mm to 200 mm · CMC 3,1 µm
Length
Internal procedure; Direct method using gauge blocks; At permanent location (S) PW_01
12 External micrometers
– resolution 0.0001 mm
Calibration — Length
0 mm to 25 mm · CMC 0,7 µm
Length
Internal procedure; Direct method using gauge blocks; At permanent location (S) PW_01
13 Torque wrenches Calibration — Torque
6 Nm to 1000 Nm · CMC 0,6 % 1000 Nm to 3000 Nm · CMC 0,9 %
Torque
Internal procedure; At permanent location (S) PW_13 based on PN-EN ISO 6789-2:2017-03

Reference standards (14)

PN-EN ISO 6789-2:2017-03
PW_01
PW_02
PW_03
PW_04
PW_05
PW_06
PW_07
PW_08
PW_09
PW_10
PW_11
PW_12
PW_13

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20199