🇵🇱 Tamtron S.A. PL

PCA AP 190 • Sośnicowice, Poland • 2 calibration items

Metrology & calibration

Tamtron S.A. is a calibration laboratory accredited by PCA under number AP 190 (Sośnicowice, Poland). Its accreditation scope covers 2 calibration items in the following areas: Metrology & calibration. Calibrated items include: Mass standards of accuracy class M1, Non-automatic electronic weighing instruments. Most frequently used calibration principles: Internal procedure; At permanent location (S), Internal procedure; At permanent location (S) and outside of it (P).

At a glance

Accreditation number: PCA AP 190
Calibration items in scope: 2
Types of calibrated items: 2
Calibration principles used: 2
City: Sośnicowice, Poland
Valid until: 12-08-2027

Accreditation number: AP 190
Accreditation body: PCA
Address: ul. Gliwicka 27 D, 44-153 Sośnicowice
City: Sośnicowice, Poland
Division: Laboratorium Wzorcujące Tamtron S.A.
Valid until: 12-08-2027

What this laboratory calibrates (2)

Mass standards of accuracy class M1 — 1 calibration item
Non-automatic electronic weighing instruments — 1 calibration item

Calibration principles (2)

Internal procedure; At permanent location (S) — 1 calibration item
Internal procedure; At permanent location (S) and outside of it (P) — 1 calibration item

Certificate information

Issue date: 05.06.2025
Issue no.: 6
Certificate date: 23.07.2020
Accreditation cycle: 13.07.2023 — 12.08.2027
Approved by: Katarzyna Wiśniewska

Accreditation scope — calibration items (2)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units. The measurement uncertainty value for CMC expressed as a percentage is a relative measurement uncertainty and refers to a percentage contribution in the value of the measurand.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Non-automatic electronic weighing instruments	Calibration — Mass (weighing instruments) 10000 kg to 100000 kg · CMC 2 · 10⁻² % Mass (weighing instruments)	Internal procedure; At permanent location (S) and outside of it (P)	IW-LW-01 w oparciu o EURAMET/cg-18/v.4.0
2	Mass standards of accuracy class M1	Calibration — Mass (weights and mass standards) 500 kg · CMC 8 g 1000 kg · CMC 16 g 2000 kg · CMC 33 g Mass (weights and mass standards)	Internal procedure; At permanent location (S)	IW-LW-02 w oparciu o OIML R-111-1:2004 Załącznik C

Reference standards (4)

EURAMET/cg-18/v.4.0

IW-LW-01

IW-LW-02

OIML R-111-1:2004

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20190