🇵🇱 CARL ZEISS Sp. z o.o. PL
Metrology & calibration
CARL ZEISS Sp. z o.o. is a calibration laboratory accredited by PCA under number AP 186 (Tychy, Poland). Its accreditation scope covers 5 calibration items in the following areas: Metrology & calibration. Calibrated items include: Contact probing systems, Coordinate measuring machines with contact probing system, Coordinate measuring systems with optical probing system, Optical coordinate measuring machines with imaging probing system. Most frequently used calibration principles: Outside of permanent location (P).
At a glance
- Accreditation number: PCA AP 186
- Calibration items in scope: 5
- Types of calibrated items: 6
- Calibration principles used: 1
- City: Tychy, Poland
- Valid until: 15-04-2027
- Accreditation number
- AP 186
- Accreditation body
- PCA
- Address
- ul. Strzelecka 72, 43-109 Tychy
- City
- Tychy, Poland
- Division
- Laboratorium Wzorcujące CARL ZEISS
- Valid until
- 15-04-2027
What this laboratory calibrates (6)
- Contact probing systems — 1 calibration item
- Coordinate measuring machines with contact probing system — 1 calibration item
- Coordinate measuring systems with optical probing system — 1 calibration item
- Optical coordinate measuring machines with imaging probing system — 1 calibration item
- Optical coordinate scanners — 1 calibration item
- Optical probing systems — 1 calibration item
Calibration principles (1)
- Outside of permanent location (P) — 5 calibration items
Certificate information
- Issue date
- 09.01.2026
- Issue no.
- 7
- Certificate date
- 10.12.2019
- Accreditation cycle
- 17.03.2023 — 15.04.2027
- Approved by
- Katarzyna Wiśniewska
Accreditation scope — calibration items (5)
| No. | Calibrated quantity / subject of calibration | Nominal range / parameters / CMC | Calibration principle | Calibration procedure | |
|---|---|---|---|---|---|
| Calibration items | |||||
| 1 | Coordinate measuring machines with contact probing system | Calibration — Length (coordinate measurements) 0 mm to 3818 mm · CMC (0,1 + 0,5 · L) μm; L – measured value (m) Length (coordinate measurements) |
Outside of permanent location (P) | PN-EN ISO 10360-2:2010 PN-EN ISO 10360-3:2002 | |
| 2 | Contact probing systems | Calibration — Length (coordinate measurements) 25 mm · CMC 0,1 μm Length (coordinate measurements) |
Outside of permanent location (P) | PN-EN ISO 10360-5:2020 | |
| 3 | Optical coordinate measuring machines with imaging probing system | Calibration — Length (coordinate measurements) 0 mm to 439 mm · CMC (0,2 + 0,6 · L) μm; L – measured value (m) Length (coordinate measurements) |
Outside of permanent location (P) | PN-EN ISO 10360-7:2011 | |
| 4 | Optical probing systems | Calibration — Length (coordinate measurements) 3,5 mm · CMC 0,25 μm 0,25 mm · CMC 0,25 μm Length (coordinate measurements) |
Outside of permanent location (P) | PN-EN ISO 10360-7:2011 | |
| 5 | Coordinate measuring systems with optical probing system Optical coordinate scanners |
Calibration — Length (coordinate measurements) 0 mm to 7575 mm · CMC (1,9 + 2,75 · L) μm; L – measured value (m) Length (coordinate measurements) |
Outside of permanent location (P) | PN-EN ISO 10360-13:2022 | |
Reference standards (5)
PN-EN ISO 10360-13:2022
PN-EN ISO 10360-2:2010
PN-EN ISO 10360-3:2002
PN-EN ISO 10360-5:2020
PN-EN ISO 10360-7:2011