🇵🇱 ZEPWN Sp. z o.o. Sp.K. PL

PCA AP 172 • Marki, Poland • 6 calibration items

Metrology & calibration

ZEPWN Sp. z o.o. Sp.K. is a calibration laboratory accredited by PCA under number AP 172 (Marki, Poland). Its accreditation scope covers 6 calibration items in the following areas: Metrology & calibration. Calibrated items include: Force-proving instruments, Transducers. Most frequently used calibration principles: Internal procedure; At permanent location (S).

At a glance

Accreditation number: PCA AP 172
Calibration items in scope: 6
Types of calibrated items: 2
Calibration principles used: 1
City: Marki, Poland
Valid until: 12-01-2029

Accreditation number: AP 172
Accreditation body: PCA
Address: ul. Kołłątaja 8, 05-270 Marki
City: Marki, Poland
Division: Laboratorium Wzorcujące ZEPWN
Valid until: 12-01-2029

What this laboratory calibrates (2)

Force-proving instruments — 6 calibration items
Transducers — 6 calibration items

Calibration principles (1)

Internal procedure; At permanent location (S) — 6 calibration items

Certificate information

Issue date: 06.11.2025
Issue no.: 7
Certificate date: 03.03.2022
Accreditation cycle: 13.12.2024 — 12.01.2029
Approved by: Katarzyna Wiśniewska

Accreditation scope — calibration items (6)

The measurement uncertainty value for CMC expressed as a percentage is a relative measurement uncertainty and refers to a percentage contribution in the value of the measurand.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Force-proving instruments Transducers	Calibration — Force for compressive forces — 1 N to 5 kN · CMC 0,01 % Force	Internal procedure; At permanent location (S)	IW-S1-1 w oparciu o PN-EN ISO 376:2011 VDI/VDE 2624 Part 2.1
2	Force-proving instruments Transducers	Calibration — Force for compressive forces — 5 kN to 1000 kN · CMC 0,05 % Force	Internal procedure; At permanent location (S)	IW-S1-1 w oparciu o PN-EN ISO 376:2011
3	Force-proving instruments Transducers	Calibration — Force for compressive forces — 3 kN to 100 kN · CMC 0,1 % Force	Internal procedure; At permanent location (S)	IW-S1-1 w oparciu o PN-EN ISO 376:2011
4	Force-proving instruments Transducers	Calibration — Force for tensile forces — 1 N to 5 kN · CMC 0,01 % Force	Internal procedure; At permanent location (S)	IW-S1-1 w oparciu o PN-EN ISO 376:2011 VDI/VDE 2624 Part 2.1
5	Force-proving instruments Transducers	Calibration — Force for tensile forces — 1 kN to 3 kN · CMC 0,1 % Force	Internal procedure; At permanent location (S)	IW-S1-1 w oparciu o PN-EN ISO 376:2011
6	Force-proving instruments Transducers	Calibration — Force for tensile forces — 3 kN to 100 kN · CMC 0,05 % Force	Internal procedure; At permanent location (S)	IW-S1-1 w oparciu o PN-EN ISO 376:2011

Reference standards (3)

IW-S1-1

PN-EN ISO 376:2011

VDI/VDE 2624 Part 2.1

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20172