🇵🇱 Instytut Nafty i Gazu - Państwowy Instytut Badawczy PL

PCA AP 152 • Kraków, Poland • 26 calibration items

Metrology & calibration

Instytut Nafty i Gazu - Państwowy Instytut Badawczy is a calibration laboratory accredited by PCA under number AP 152 (Kraków, Poland). Its accreditation scope covers 26 calibration items in the following areas: Metrology & calibration. Calibrated items include: Calibrators, Multimeters, Diaphragm gas meters, Digital ammeters. Most frequently used calibration principles: Internal procedure; At permanent location (S), Internal procedure; At permanent location (S) and outside of it (P).

At a glance

  • Accreditation number: PCA AP 152
  • Calibration items in scope: 26
  • Types of calibrated items: 21
  • Calibration principles used: 2
  • City: Kraków, Poland
  • Valid until: 08-08-2029
Accreditation number
AP 152
Accreditation body
PCA
Address
ul. Bagrowa 1, 30-733 Kraków
City
Kraków, Poland
Division
Calibration Laboratory
Valid until
08-08-2029

What this laboratory calibrates (21)

Calibration principles (2)

Certificate information

Issue date
11.07.2025
Issue no.
15
Certificate date
14.07.2020
Accreditation cycle
11.07.2025 — 08.08.2029
Approved by
Katarzyna Wiśniewska

Accreditation scope — calibration items (26)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units. A CMC uncertainty value expressed as a percentage is the relative measurement uncertainty and refers to the percentage of the value of the measurand.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 Digital voltmeters
Multimeters
Calibrators
Calibration — DC voltage
0 mV to 200 mV · CMC 5 · 10⁻⁶ · U + 1,1 μV 200 mV to 20 V · CMC 0,0006 % 20 V to 1000 V · CMC 0,0009 %
DC voltage
Internal procedure; At permanent location (S) PW LW-E-01 based on Euramet cg-15 v. 3.0
2 Digital ammeters
Multimeters
Calibrators
Calibration — DC current
10 μA to 0,2 mA · CMC 1,7 · 10⁻⁵ · I + 0,6 nA 0,2 mA to 20 mA · CMC 0,0034 % 20 mA to 200 mA · CMC 0,0061 % 200 mA to 2 A · CMC 0,02 % 2 A to 20 A · CMC 0,07%
DC current
Internal procedure; At permanent location (S) PW LW-E-01 based on Euramet cg-15 v. 3.0
3 Digital voltmeters
Multimeters
Calibrators
Calibration — AC voltage
f = 10 Hz to 40 kHz — 1mV to 200mV · CMC 8 · 10⁻⁵ · U + 24 μV f = 10 Hz to 40 kHz — 200mV to 200V · CMC 0,053 % f = 10 Hz to 40 kHz — 200V to 1000V · CMC 0,032 % f = 40 Hz to 10 kHz — 1mV to 200mV · CMC 8 · 10⁻⁵ · U + 18 μV f = 40 Hz to 10 kHz — 200mV to 200V · CMC 0,03 % f = 40 Hz to 10 kHz — 200V to 1000V · CMC 0,03 % f = 10 kHz to 30 kHz — 1mV to 200mV · CMC 3 · 10⁻⁴ · U + 17 μV f = 10 kHz to 30 kHz — 200mV to 200V · CMC 0,05 % f = 10 kHz to 30 kHz — 200V to 1000V · CMC 0,055 % f = 30 kHz to 100 kHz — 1mV to 200mV · CMC 7 · 10⁻⁴ · U + 33 μV f = 30 kHz to 100 kHz — 200mV to 200V · CMC 0,16 % f = 30 kHz to 100 kHz — 200V to 1000V · CMC 0,19 % f = 100 kHz to 300 kHz — 200mV to 2V · CMC 3 · 10⁻³ · U + 2 mV f = 100 kHz to 300 kHz — 2V to 200V · CMC 1,3 %
AC voltage
Internal procedure; At permanent location (S) PW LW-E-01 based on Euramet cg-15 v. 3.0
4 Digital ammeters
Multimeters
Calibrators
Calibration — AC current
f = 10 Hz to 2 kHz — 10μA to 200μA · CMC 5 · 10⁻⁴ · I + 21 nA f = 10 Hz to 2 kHz — 200μA to 200mA · CMC 0,016 % f = 10 Hz to 2 kHz — 200mA to 2A · CMC 0,21 % f = 10 Hz to 2 kHz — 2A to 20A · CMC 0,28 % f = 2 kHz to 10 kHz — 10μA to 200μA · CMC 5 · 10⁻⁴ · I + 34 nA f = 2 kHz to 10 kHz — 200μA to 200mA · CMC 0,20 % f = 2 kHz to 10 kHz — 200mA to 2A · CMC 0,30 % f = 2 kHz to 10 kHz — 2A to 20A · CMC 0,57 %
AC current
Internal procedure; At permanent location (S) PW LW-E-01 based on Euramet cg-15 v. 3.0
5 Digital ohmmeters
Multimeters
Calibrators
Calibration — DC resistance
1 Ω to 2 Ω · CMC 5 · 10⁻⁶ · R + 0,06 mΩ 2 Ω to 20 Ω · CMC 0,0034 % 20 Ω to 20 kΩ · CMC 0,0011 % 20 kΩ to 200 kΩ · CMC 0,0012 % 200 kΩ to 2 MΩ · CMC 0,0015 % 2 MΩ to 20 MΩ · CMC 0,007 % 20 MΩ to 200 MΩ · CMC 0,06 % 200 MΩ to 20 GΩ · CMC 0,7 %
DC resistance
Internal procedure; At permanent location (S) PW LW-E-01 based on Euramet cg-15 v. 3.0
6 Temperature transmitters (with analogue output) Calibration — Electrical simulation of quantities
-200 °C to 850 °C · CMC 0,12 °C
Electrical simulation of quantities
Internal procedure; At permanent location (S) and outside of it (P) PW LW-T-04 based on Euramet cg-11 v. 2.0
7 Temperature transmitters (with digital output) Calibration — Electrical simulation of quantities
-200°C to 850 °C · CMC 0,062 °C
Electrical simulation of quantities
Internal procedure; At permanent location (S) and outside of it (P) PW LW-T-04 based on Euramet cg-11 v. 2.0
8 Diaphragm gas meters Calibration — Volume flow rate (flow – gases)
0,016 m³/h to 0,025 m³/h · CMC 0,50 % 0,025 m³/h to 17 m³/h · CMC 0,26 %
Volume flow rate (flow – gases)
Internal procedure; At permanent location (S) PW LW-P-01
9 Diaphragm gas meters Calibration — Volume flow rate (flow – gases)
25 m³/h to 100 m³/h · CMC 0,23 % 100 m³/h to 160 m³/h · CMC 0,30 %
Volume flow rate (flow – gases)
Internal procedure; At permanent location (S) PW LW-P-03
10 Turbine gas meters Calibration — Volume flow rate (flow – gases)
0,8 m³/h to 17 m³/h · CMC 0,26 %
Volume flow rate (flow – gases)
Internal procedure; At permanent location (S) PW LW-P-02
11 Turbine gas meters Calibration — Volume flow rate (flow – gases)
25 m³/h to 100 m³/h · CMC 0,23 % 100 m³/h to 400 m³/h · CMC 0,30 %
Volume flow rate (flow – gases)
Internal procedure; At permanent location (S) PW LW-P-03
12 Rotary gas meters Calibration — Volume flow rate (flow – gases)
0,1 m³/h to 17 m³/h · CMC 0,28%
Volume flow rate (flow – gases)
Internal procedure; At permanent location (S) PW LW-P-02
13 Rotary gas meters Calibration — Volume flow rate (flow – gases)
25 m³/h to 100 m³/h · CMC 0,25 % 100 m³/h to 400 m³/h · CMC 0,32 %
Volume flow rate (flow – gases)
Internal procedure; At permanent location (S) PW LW-P-03
14 Drum gas meters Calibration — Volume flow rate (flow – gases)
0,016 m³/h to 0,025 m³/h · CMC 0,51 % 0,025 m³/h to 17 m³/h · CMC 0,27 %
Volume flow rate (flow – gases)
Internal procedure; At permanent location (S) PW LW-P-02
15 Electronic pressure gauges (including pressure calibrators)
Gas volume conversion devices with pressure measurement function
Calibration — Pressure
- absolute pressure (gas) — 0,04 bar to 1,1 bar · CMC 1,7 · 10⁻⁴ bar - absolute pressure (gas) — 1,1 bar to 2 bar · CMC 2,6 · 10⁻⁴ bar - absolute pressure (gas) — 2 bar to 6 bar · CMC 7,0 · 10⁻⁴ bar - absolute pressure (gas) — 6 bar to 17,5 bar · CMC 2,4 · 10⁻³ bar - absolute pressure (gas) — 17,5 bar to 70 bar · CMC 7,7 · 10⁻³ bar - absolute pressure (gas) — 70 bar to 100 bar · CMC 29 · 10⁻³ bar - absolute pressure (gas) — 100 bar to 135 bar · CMC 33 · 10⁻³ bar
Pressure
Internal procedure; At permanent location (S) and outside of it (P) PW LW-C-01
16 Pressure transducers Calibration — Pressure
- absolute pressure (gas) — 0,04 bar to 1,1 bar · CMC 1,7 · 10⁻⁴ bar - absolute pressure (gas) — 1,1 bar to 2 bar · CMC 2,6 · 10⁻⁴ bar - absolute pressure (gas) — 2 bar to 6 bar · CMC 7,0 · 10⁻⁴ bar - absolute pressure (gas) — 6 bar to 17,5 bar · CMC 2,4 · 10⁻³ bar - absolute pressure (gas) — 17,5 bar to 70 bar · CMC 7,7 · 10⁻³ bar - absolute pressure (gas) — 70 bar to 100 bar · CMC 29 · 10⁻³ bar - absolute pressure (gas) — 100 bar to 135 bar · CMC 33 · 10⁻³ bar
Pressure
Internal procedure; At permanent location (S) and outside of it (P) PW LW-C-02
17 Spring pressure gauges Calibration — Pressure
- absolute pressure (gas) — 0,04 bar to 1,1 bar · CMC 8,9 · 10⁻⁴ bar - absolute pressure (gas) — 1,1 bar to 1,5 bar · CMC 2,2 · 10⁻³ bar - absolute pressure (gas) — 1,5 bar to 6 bar · CMC 3,2 · 10⁻³ bar - absolute pressure (gas) — 6 bar to 17,5 bar · CMC 13 · 10⁻³ bar - absolute pressure (gas) — 17,5 bar to 70 bar · CMC 38 · 10⁻³ bar - absolute pressure (gas) — 70 bar to 100 bar · CMC 150 · 10⁻³ bar - absolute pressure (gas) — 100 bar to 135 bar · CMC 220 · 10⁻³ bar
Pressure
Internal procedure; At permanent location (S) and outside of it (P) PW LW-C-01
18 Electronic pressure gauges (including pressure calibrators)
Gas volume conversion devices with pressure measurement function
Calibration — Pressure
- gauge pressure (gas) — -0,98 bar to 1,5 bar · CMC 2,8 · 10⁻⁴ bar - gauge pressure (gas) — 1,5 bar to 6 bar · CMC 7,0 · 10⁻⁴ bar - gauge pressure (gas) — 6 bar to 17,5 bar · CMC 2,4 · 10⁻³ bar - gauge pressure (gas) — 17,5 bar to 70 bar · CMC 7,7 · 10⁻³ bar - gauge pressure (gas) — 70 bar to 135 bar · CMC 33 · 10⁻³ bar
Pressure
Internal procedure; At permanent location (S) and outside of it (P) PW LW-C-01
19 Pressure transducers Calibration — Pressure
- gauge pressure (gas) — -0,98 bar to 0,0 bar · CMC 1,8 · 10⁻⁴ bar - gauge pressure (gas) — 0,0 bar to 6 bar · CMC 8,2 · 10⁻⁴ bar - gauge pressure (gas) — 6 bar to 17,5 bar · CMC 2,4 · 10⁻³ bar - gauge pressure (gas) — 17,5 bar to 70 bar · CMC 7,7 · 10⁻³ bar - gauge pressure (gas) — 70 bar to 135 bar · CMC 36 · 10⁻³ bar
Pressure
Internal procedure; At permanent location (S) and outside of it (P) PW LW-C-02
20 Spring pressure gauges Calibration — Pressure
- gauge pressure (gas) — 0 bar to 1,5 bar · CMC 2,2 · 10⁻⁴ bar - gauge pressure (gas) — 1,5 bar to 6 bar · CMC 3,2 · 10⁻³ bar - gauge pressure (gas) — 6 bar to 17,5 bar · CMC 13 · 10⁻³ bar - gauge pressure (gas) — 17,5 bar to 70 bar · CMC 38 · 10⁻³ bar - gauge pressure (gas) — 70 bar to 100 bar · CMC 150 · 10⁻³ bar - gauge pressure (gas) — 100 bar to 135 bar · CMC 220 · 10⁻³ bar
Pressure
Internal procedure; At permanent location (S) and outside of it (P) PW LW-C-01
21 Resistance thermometer sensors Calibration — Temperature (electrical thermometry)
-40 °C to 125 °C · CMC 0,05 °C 125°C do 375 °C · CMC 0,1 °C 375°C do 660 °C · CMC 0,2 °C
Temperature (electrical thermometry)
Internal procedure; At permanent location (S) PW LW-T-02
22 Temperature transmitters (containing temperature sensors) Calibration — Temperature (electrical thermometry)
-40°C to 125 °C · CMC 0,05 °C 125°C to 375 °C · CMC 0,1 °C 375°C to 660 °C · CMC 0,2 °C
Temperature (electrical thermometry)
Internal procedure; At permanent location (S) and outside of it (P) PW LW-T-08
23 Noble metal thermocouples Calibration — Temperature (electrical thermometry)
0°C to 300 °C · CMC 0,9 °C 300°C to 660 °C · CMC 1,3 °C
Temperature (electrical thermometry)
Internal procedure; At permanent location (S) PW LW-T-05
24 Base metal thermocouples Calibration — Temperature (electrical thermometry)
0°C to 300 °C · CMC 0,9 °C 300°C to 660 °C · CMC 1,3 °C
Temperature (electrical thermometry)
Internal procedure; At permanent location (S) PW LW-T-05
25 Electrical thermometers Calibration — Temperature (electrical thermometry)
-40°C to 125 °C · CMC 0,05 °C 125°C to 375 °C · CMC 0,1 °C 375°C to 660 °C · CMC 0,2 °C
Temperature (electrical thermometry)
Internal procedure; At permanent location (S) and outside of it (P) PW LW-T-07
26 Liquid-in-glass thermometers Calibration — Temperature (non-electrical thermometry)
-40°C to 0 °C · CMC 0,05 °C 0°C to 125 °C · CMC 0,09 °C
Temperature (non-electrical thermometry)
Internal procedure; At permanent location (S) PW LW-T-06

Reference standards (14)

Euramet cg-11 v. 2.0
Euramet cg-15 v. 3.0
PW LW-C-01
PW LW-C-02
PW LW-E-01
PW LW-P-01
PW LW-P-02
PW LW-P-03
PW LW-T-02
PW LW-T-04
PW LW-T-05
PW LW-T-06
PW LW-T-07
PW LW-T-08

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20152