🇵🇱 Wagi Wielkopolska Sp. z o.o. PL

PCA AP 151 • Puszczykowo, Poland • 3 calibration items

Metrology & calibration

Wagi Wielkopolska Sp. z o.o. is a calibration laboratory accredited by PCA under number AP 151 (Puszczykowo, Poland). Its accreditation scope covers 3 calibration items in the following areas: Metrology & calibration. Calibrated items include: Force transducers, Electronic non-automatic weighing instruments. Most frequently used calibration principles: Internal procedure; At permanent location (S), Internal procedure; At permanent location (S) and outside of it (P), Internal procedure; Outside of permanent location (P).

At a glance

Accreditation number: PCA AP 151
Calibration items in scope: 3
Types of calibrated items: 2
Calibration principles used: 3
City: Puszczykowo, Poland
Valid until: 08-08-2029

Accreditation number: AP 151
Accreditation body: PCA
Address: ul. Śląska 18, 62-040 Puszczykowo
City: Puszczykowo, Poland
Division: Laboratorium Wzorcujące Wagi Wielkopolska
Valid until: 08-08-2029

What this laboratory calibrates (2)

Force transducers — 2 calibration items
Electronic non-automatic weighing instruments — 1 calibration item

Calibration principles (3)

Internal procedure; At permanent location (S) — 1 calibration item
Internal procedure; At permanent location (S) and outside of it (P) — 1 calibration item
Internal procedure; Outside of permanent location (P) — 1 calibration item

Certificate information

Issue date: 29.07.2026
Issue no.: 13
Certificate date: 09.10.2020
Accreditation cycle: 24.07.2025 — 08.08.2029
Approved by: Katarzyna Wiśniewska

Accreditation scope — calibration items (3)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 %. The value expressed as a percentage is a relative measurement uncertainty and refers to a percentage contribution in the value of the measurand.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Electronic non-automatic weighing instruments	Calibration — Mass (weights) to 500 g · CMC 2 · 10⁻⁴ % 500 g to 4,2 kg · CMC 5 · 10⁻⁴ % 4,2 kg to 35 kg · CMC 4,6 · 10⁻³ % 35 kg to 300 kg · CMC 6,7 · 10⁻³ % 300 kg to 3000 kg · CMC 3,0 · 10⁻² % Mass (weights)	Internal procedure; At permanent location (S) and outside of it (P)	IP-01 w oparciu o EURAMET cg-18 v.4.0
2	Force transducers	Calibration — Force 0,1 N to 1 kN · CMC 0,12 % 1 kN to 10 kN · CMC 0,24 % Force	Internal procedure; At permanent location (S)	IP-02 w oparciu o VDI /VDE 2624 Part 2.1 (2008)
3	Force transducers	Calibration — Force 0,1 N to 1 kN · CMC 0,24 % Force	Internal procedure; Outside of permanent location (P)	IP-02 w oparciu o VDI /VDE 2624 Part 2.1 (2008)

Reference standards (4)

EURAMET cg-18 v.4.0

IP-01

IP-02

VDI /VDE 2624 Part 2.1 (2008)

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20151