🇵🇱 ENEA Wytwarzanie Sp. z o.o. PL
Metrology & calibration
ENEA Wytwarzanie Sp. z o.o. is a calibration laboratory accredited by PCA under number AP 147 (Kozienice, Poland). Its accreditation scope covers 11 calibration items in the following areas: Metrology & calibration. Calibrated items include: Multimeters, Bourdon tube pressure gauges, Digital ammeters, Digital voltmeters. Most frequently used calibration principles: Internal procedure; At permanent location (S), Internal procedure; Outside of permanent location (P), Internal procedure; At permanent location (S) and outside of it (P).
At a glance
- Accreditation number: PCA AP 147
- Calibration items in scope: 11
- Types of calibrated items: 12
- Calibration principles used: 3
- City: Kozienice, Poland
- Valid until: 15-01-2029
- Accreditation number
- AP 147
- Accreditation body
- PCA
- Address
- Al. Józefa Zielińskiego 1 Świerże Górne , 26-900 Kozienice
- City
- Kozienice, Poland
- Division
- Calibration Laboratory of the Measurement Department
- Valid until
- 15-01-2029
What this laboratory calibrates (12)
- Multimeters — 4 calibration items
- Bourdon tube pressure gauges — 2 calibration items
- Digital ammeters — 2 calibration items
- Digital voltmeters — 2 calibration items
- Pressure transmitters — 2 calibration items
- - gauge pressure (medium gas) — 1 calibration item
- - gauge pressure (medium liquid) — 1 calibration item
- Automatic conveyor belt weighers — 1 calibration item
- Automatic rail weighbridges — 1 calibration item
- Electronic non-automatic weighing instruments — 1 calibration item
- Noble and base metal thermocouples (type S, K, J) — 1 calibration item
- Resistance thermometer sensors — 1 calibration item
Calibration principles (3)
- Internal procedure; At permanent location (S) — 8 calibration items
- Internal procedure; Outside of permanent location (P) — 2 calibration items
- Internal procedure; At permanent location (S) and outside of it (P) — 1 calibration item
Certificate information
- Issue date
- 28.10.2026
- Issue no.
- 14
- Certificate date
- 04.12.2019
- Accreditation cycle
- 18.12.2024 — 15.01.2029
- Approved by
- Katarzyna Wiśniewska
Accreditation scope — calibration items (11)
| No. | Calibrated quantity / subject of calibration | Nominal range / parameters / CMC | Calibration principle | Calibration procedure | |
|---|---|---|---|---|---|
| Calibration items | |||||
| 1 | Digital voltmeters Multimeters |
Calibration — DC voltage 10 mV to 100 mV · CMC 0,010 mV 100 mV to 1 V · CMC 0,000063 V 1 to 10 V · CMC 0,00055 V 10 V to 100 V · CMC 0,0062 V 100 V to 1000 V · CMC 0,044 V DC voltage |
Internal procedure; At permanent location (S) | PW-01.00.00 | |
| 2 | Digital ammeters Multimeters |
Calibration — DC current 1 mA to 10 mA · CMC 0,027 mA 10 mA to 100 mA · CMC 0,036 mA 100 mA to 1 A · CMC 0,00042 mA 1 to 3 A · CMC 0,0064 A DC current |
Internal procedure; At permanent location (S) | PW-01.00.00 | |
| 3 | Digital voltmeters Multimeters |
Calibration — AC voltage f = 50 Hz — 100 mV to 1 V · CMC 0,00062 V f = 50 Hz — 1 V to 10 V · CMC 0,0060 V f = 50 Hz — 10 V to 100 V · CMC 0,062 V f = 50 Hz — 100 V to 750 V · CMC 0,36 V AC voltage |
Internal procedure; At permanent location (S) | PW-01.00.00 | |
| 4 | Digital ammeters Multimeters |
Calibration — AC current f = 50 Hz — 100 mA to 1A · CMC 0,0014 A AC current |
Internal procedure; At permanent location (S) | PW-01.00.00 | |
| 5 | Electronic non-automatic weighing instruments | Calibration — Mass (weighing instruments) 10 kg to 500 kg · CMC 6 · 10⁻³ % 500 kg to 100 000 kg · CMC 3 · 10⁻² % Mass (weighing instruments) |
Internal procedure; At permanent location (S) and outside of it (P) | PW-06.00.00 based on EURAMET cg-18 v.4.0 | |
| 6 | Automatic conveyor belt weighers | Calibration — Mass (weighing instruments) up to 100 000 kg · CMC 3 · 10⁻¹ % Mass (weighing instruments) |
Internal procedure; Outside of permanent location (P) | PW-07.00.00 based on OIML R50-1:2014 (p. 7), OIML R50-2:2014 (p. 10) | |
| 7 | Automatic rail weighbridges | Calibration — Mass (weighing instruments) up to 100 000 kg · CMC 6 · 10⁻² % Mass (weighing instruments) |
Internal procedure; Outside of permanent location (P) | PW-08.00.00 based on OIML R106-1:2011 (p. 6) | |
| 8 | Bourdon tube pressure gauges Pressure transmitters - gauge pressure (medium gas) |
Calibration — Pressure -100 kPa to 0 kPa · CMC 0,13 kPa 0 kPa to 200 kPa · CMC 0,2 kPa 200 kPa to 250 kPa · CMC 0,4 kPa 250 kPa to 2500 kPa · CMC 3 kPa Pressure |
Internal procedure; At permanent location (S) | PW-02.00.00, PW-05.00.00 based on EURAMET cg-17 v.4.1 | |
| 9 | Bourdon tube pressure gauges Pressure transmitters - gauge pressure (medium liquid) |
Calibration — Pressure 0,06 MPa do 0,6 MPa · CMC 0,0008 MPa 0,6 MPa to 6 MPa · CMC 0,007 MPa 6 MPa do 30 MPa · CMC 0,04 MPa Pressure |
Internal procedure; At permanent location (S) | PW-02.00.00, PW-05.00.00 based on EURAMET cg-17 v.4.1 | |
| 10 | Noble and base metal thermocouples (type S, K, J) | Calibration — Temperature (electrical thermometry) 200 °C to 600 °C · CMC 1,5 °C Temperature (electrical thermometry) |
Internal procedure; At permanent location (S) | PW-03.00.00 based on EURAMET cg-8 v.3.1 | |
| 11 | Resistance thermometer sensors | Calibration — Temperature (electrical thermometry) -20 °C to 150 °C · CMC 0,1 °C Temperature (electrical thermometry) |
Internal procedure; At permanent location (S) | PW-03.00.00 | |
Reference standards (13)
EURAMET cg-17 v.4.1
EURAMET cg-18 v.4.0
EURAMET cg-8 v.3.1
OIML R106-1:2011 (p. 6)
OIML R50-1:2014 (p. 7)
OIML R50-2:2014 (p. 10)
PW-01.00.00
PW-02.00.00
PW-03.00.00
PW-05.00.00
PW-06.00.00
PW-07.00.00
PW-08.00.00