🇵🇱 Astem Sp. z o.o. PL

PCA AP 127 • Dębica, Poland • 14 calibration items

Metrology & calibration

Astem Sp. z o.o. is a calibration laboratory accredited by PCA under number AP 127 (Dębica, Poland). Its accreditation scope covers 14 calibration items in the following areas: Metrology & calibration. Calibrated items include: Electronic pressure gauges, Pressure transducers, Spring pressure gauges, Analog dial indicators with scale interval of 0,01 mm. Most frequently used calibration principles: Internal procedure; At permanent location (S), At permanent location (S).

At a glance

Accreditation number: PCA AP 127
Calibration items in scope: 14
Types of calibrated items: 17
Calibration principles used: 2
City: Dębica, Poland
Valid until: 01-10-2029

Accreditation number: AP 127
Accreditation body: PCA
Address: ul. 1 Maja 1, 39-200 Dębica
City: Dębica, Poland
Division: Zespół Laboratoriów Pomiarowych
Valid until: 01-10-2029

What this laboratory calibrates (17)

Electronic pressure gauges — 2 calibration items
Pressure transducers — 2 calibration items
Spring pressure gauges — 2 calibration items
Analog dial indicators with scale interval of 0,01 mm — 1 calibration item
Base metal thermocouples — 1 calibration item
Calipers — 1 calibration item
Digital indicators with resolution of 0,01 mm — 1 calibration item
Electrical thermometers (including electronic) — 1 calibration item
External micrometers — 1 calibration item
Pyrometers — 1 calibration item
Resistance thermometer sensors — 1 calibration item
Rigid rules — 1 calibration item
Semi-rigid rules — 1 calibration item
Tape measures — 1 calibration item
Temperature indicators (meters), including temperature controllers — 1 calibration item
and 2 more

Calibration principles (2)

Internal procedure; At permanent location (S) — 12 calibration items
At permanent location (S) — 2 calibration items

Certificate information

Issue date: 30.06.2026
Issue no.: 22
Certificate date: 30.08.2022
Accreditation cycle: 11.09.2025 — 01.10.2029
Approved by: Katarzyna Wiśniewska

Accreditation scope — calibration items (14)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units. The measurement uncertainty value for CMC expressed as the equation Q[a; b] represents the square root of the sum of the squares of the terms in brackets: Q[a; b] = (a² + b²)^1/2.

No.	Calibrated quantity / subject of calibration	Nominal range / parameters / CMC	Calibration principle	Calibration procedure
Calibration items
1	Calipers	Calibration — Length 0 mm to 600 mm · CMC 18 μm Length	At permanent location (S)	PN-EN ISO 13385-1:2019
2	Analog dial indicators with scale interval of 0,01 mm	Calibration — Length 0 mm to 50 mm · CMC 5 μm Length	Internal procedure; At permanent location (S)	PP/LD-42/52
3	Digital indicators with resolution of 0,01 mm	Calibration — Length 0 mm to 50,8 mm · CMC 5 μm Length	At permanent location (S)	PN-EN ISO 13102:2013
4	Tape measures Rigid rules Semi-rigid rules	Calibration — Length 0 m to 5 m · CMC Q[0,12; 0,022 · L] mm; L – measured length (m) Length	Internal procedure; At permanent location (S)	PP/LD-44/54
5	External micrometers	Calibration — Length 0 mm to 25 mm · CMC 0,9 μm 25 mm to 50 mm · CMC 1,1 μm 50 mm to 75 mm · CMC 1,3 μm 75 mm to 100 mm · CMC 1,7 μm 100 mm to 125 mm · CMC 2,0 μm 125 mm to 150 mm · CMC 2,4 μm 150 mm to 175 mm · CMC 2,7 μm 175 mm to 200 mm · CMC 3,1 μm Length	Internal procedure; At permanent location (S)	PP/LD-46/56
6	Temperature indicators (meters), including temperature controllers Temperature simulators Temperature transducers	Calibration — Electrical simulation of quantities for RTD sensors — -200 °C to 850 °C · CMC 0.08 °C for PT sensors — -200 °C to 1370 °C · CMC 0,4 °C Electrical simulation of quantities	Internal procedure; At permanent location (S)	PP/LT-30
7	Electronic pressure gauges Spring pressure gauges	Calibration — Pressure gauge pressure — -0,09 MPa to 0 MPa · CMC 0,0004 MPa gauge pressure — 0 MPa to 0,07 MPa · CMC 0,00012 MPa gauge pressure — 0,07 MPa to 0,7 MPa · CMC 0,00036 MPa gauge pressure — 0,7 MPa to 7,0 MPa · CMC 0,0036 MPa gauge pressure — 7,0 MPa to 70,0 MPa · CMC 0,036 MPa Pressure	Internal procedure; At permanent location (S)	PP/LC-17
8	Electronic pressure gauges Spring pressure gauges	Calibration — Pressure absolute pressure — 0 MPa to 0,7 MPa · CMC 0,0007 MPa absolute pressure — 0 MPa to 0,7 MPa · CMC 0,0007 MPa Pressure	Internal procedure; At permanent location (S)	PP/LC-17
9	Pressure transducers	Calibration — Pressure gauge pressure — 0,0 MPa to 0,4 MPa · CMC 0,001 MPa gauge pressure — 0,4 MPa to 6,0 MPa · CMC 0,007 MPa gauge pressure — 6,0 MPa to 70,0 MPa · CMC 0,07 MPa Pressure	Internal procedure; At permanent location (S)	PP/LC-19
10	Pressure transducers	Calibration — Pressure absolute pressure — 0 MPa to 0,7 MPa · CMC 0,0007 MPa Pressure	Internal procedure; At permanent location (S)	PP/LC-19
11	Resistance thermometer sensors	Calibration — Temperature (electrical thermometry) -20 °C to 425 °C · CMC 5 · 10⁻⁴ · \|t\| + 0,02 °C; t – measured value (°C) Temperature (electrical thermometry)	Internal procedure; At permanent location (S)	PP/LT-31
12	Base metal thermocouples	Calibration — Temperature (electrical thermometry) -20 °C to 425 °C · CMC 2 · 10⁻³ · \|t\| + 0,4 °C; t – measured value (°C) Temperature (electrical thermometry)	Internal procedure; At permanent location (S)	PP/LT-32
13	Electrical thermometers (including electronic)	Calibration — Temperature (electrical thermometry) -20 °C to 425 °C · CMC 0,2 °C Temperature (electrical thermometry)	Internal procedure; At permanent location (S)	PP/LT-35
14	Pyrometers	Calibration — Temperature (radiation thermometry) -20 °C to 350 °C · CMC 5 · 10⁻³ · \|t\| + 0,8 °C; t – measured value (°C) Temperature (radiation thermometry)	Internal procedure; At permanent location (S)	PP/LT-34 w oparciu o MSL Guide No. 22 v.3

Reference standards (13)

MSL Guide No. 22 v.3

PN-EN ISO 13102:2013

PN-EN ISO 13385-1:2019

PP/LC-17

PP/LC-19

PP/LD-42/52

PP/LD-44/54

PP/LD-46/56

PP/LT-30

PP/LT-31

PP/LT-32

PP/LT-34

PP/LT-35

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20127