🇵🇱 TOPS S.C. Krzysztof Ziomek, Piotr Sierek PL
Metrology & calibration
TOPS S.C. Krzysztof Ziomek, Piotr Sierek is a calibration laboratory accredited by PCA under number AP 093 (Czechowice Dziedzice, Poland). Its accreditation scope covers 9 calibration items in the following areas: Metrology & calibration. Calibrated items include: Mass standards, Load weights, Mass standards and weights of accuracy class F₁, Mass standards and weights of accuracy class F₂. Most frequently used calibration principles: Internal procedure; At permanent location (S), Internal procedure; At permanent location (S) and outside of it (P).
At a glance
- Accreditation number: PCA AP 093
- Calibration items in scope: 9
- Types of calibrated items: 9
- Calibration principles used: 2
- City: Czechowice Dziedzice, Poland
- Valid until: 09-02-2030
- Accreditation number
- AP 093
- Accreditation body
- PCA
- Address
- ul. Legionów 239a, 43-502 Czechowice Dziedzice
- City
- Czechowice Dziedzice, Poland
- Division
- Mass Measurement Laboratory
- Valid until
- 09-02-2030
What this laboratory calibrates (9)
- Mass standards — 2 calibration items
- Load weights — 1 calibration item
- Mass standards and weights of accuracy class F₁ — 1 calibration item
- Mass standards and weights of accuracy class F₂ — 1 calibration item
- Mass standards and weights of accuracy class M₁ — 1 calibration item
- Mass standards and weights of accuracy class M₂ — 1 calibration item
- Mass standards and weights of accuracy class M₃ — 1 calibration item
- Non-automatic electronic weighing instruments — 1 calibration item
- Non-automatic mechanical weighing instruments — 1 calibration item
Calibration principles (2)
- Internal procedure; At permanent location (S) — 7 calibration items
- Internal procedure; At permanent location (S) and outside of it (P) — 2 calibration items
Certificate information
- Issue date
- 05.03.2026
- Issue no.
- 16
- Certificate date
- 24.01.2020
- Accreditation cycle
- 14.01.2026 — 09.02.2030
- Approved by
- Katarzyna Wiśniewska
Accreditation scope — calibration items (9)
| No. | Calibrated quantity / subject of calibration | Nominal range / parameters / CMC | Calibration principle | Calibration procedure | |
|---|---|---|---|---|---|
| Calibration items | |||||
| 1 | Non-automatic electronic weighing instruments Non-automatic mechanical weighing instruments |
Calibration — Mass (weighing instruments) up to 400 g · CMC 5 · 10⁻⁵ % 400 g to20 kg · CMC 2,6 · 10⁻⁴ % 20 kg to 75 kg · CMC 6,2 · 10⁻⁴ % 75 kg to 5000 kg · CMC 1,1 · 10⁻² % Mass (weighing instruments) |
Internal procedure; At permanent location (S) and outside of it (P) | PTW-01 based on EURAMET cg-18 v.4.0 | |
| 2 | Mass standards and weights of accuracy class F₁ | Calibration — Mass (weights and mass standards) 1 mg · CMC 0,006 mg 2 mg · CMC 0,006 mg 5 mg · CMC 0,006 mg 10 mg · CMC 0,008 mg 20 mg · CMC 0,010 mg 50 mg · CMC 0,012 mg 100 mg · CMC 0,016 mg 200 mg · CMC 0,020 mg 500 mg · CMC 0,025 mg 1 g · CMC 0,03 mg 2 g · CMC 0,04 mg 5 g · CMC 0,05 mg 10 g · CMC 0,06 mg 20 g · CMC 0,08 mg 50 g · CMC 0,10 mg 100 g · CMC 0,16 mg 200 g · CMC 0,3 mg 500 g · CMC 0,8 mg 1 kg · CMC 1,6 mg 2 kg · CMC 3,0 mg 5 kg · CMC 8,0 mg 10 kg · CMC 16 mg Mass (weights and mass standards) |
Internal procedure; At permanent location (S) | PTW-03 based on OIML R 111-1:2004 Annex C | |
| 3 | Mass standards and weights of accuracy class F₂ | Calibration — Mass (weights and mass standards) 1 mg · CMC 0,020 mg 2 mg · CMC 0,020 mg 5 mg · CMC 0,020 mg 10 mg · CMC 0,025 mg 20 mg · CMC 0,03 mg 50 mg · CMC 0,04 mg 100 mg · CMC 0,05 mg 200 mg · CMC 0,06 mg 500 mg · CMC 0,08 mg 1 g · CMC 0,10 mg 2 g · CMC 0,12 mg 5 g · CMC 0,16 mg 10 g · CMC 0,20 mg 20 g · CMC 0,25 mg 50 g · CMC 0,3 mg 100 g · CMC 0,5 mg 200 g · CMC 1,0 mg 500 g · CMC 2,5 mg 1 kg · CMC 5,0 mg 2 kg · CMC 10 mg 5 kg · CMC 25 mg 10 kg · CMC 50 mg 20 kg · CMC 100 mg Mass (weights and mass standards) |
Internal procedure; At permanent location (S) | PTW-03 based on OIML R 111-1:2004 Annex C | |
| 4 | Mass standards and weights of accuracy class M₁ | Calibration — Mass (weights and mass standards) 1 mg · CMC 0,06 mg 2 mg · CMC 0,06 mg 5 mg · CMC 0,06 mg 10 mg · CMC 0,08 mg 20 mg · CMC 0,10 mg 50 mg · CMC 0,12 mg 100 mg · CMC 0,16 mg 200 mg · CMC 0,20 mg 500 mg · CMC 0,25 mg 1 g · CMC 0,3 mg 2 g · CMC 0,4 mg 5 g · CMC 0,5 mg 10 g · CMC 0,6 mg 20 g · CMC 0,8 mg 50 g · CMC 1,0 mg 100 g · CMC 1,6 mg 200 g · CMC 3,0 mg 500 g · CMC 8,0 mg 1 kg · CMC 16 mg 2 kg · CMC 30 mg 5 kg · CMC 80 mg 10 kg · CMC 160 mg 20 kg · CMC 300 mg Mass (weights and mass standards) |
Internal procedure; At permanent location (S) | PTW-03 based on OIML R 111-1:2004 Annex C | |
| 5 | Mass standards and weights of accuracy class M₂ | Calibration — Mass (weights and mass standards) 100 mg · CMC 0,5 mg 200 mg · CMC 0,6 mg 500 mg · CMC 0,8 mg 1 g · CMC 1,0 mg 2 g · CMC 1,2 mg 5 g · CMC 1,6 mg 10 g · CMC 2,0 mg 20 g · CMC 2,5 mg 50 g · CMC 3 mg 100 g · CMC 5 mg 200 g · CMC 10 mg 500 g · CMC 25 mg 1 kg · CMC 50 mg 2 kg · CMC 100 mg 5 kg · CMC 250 mg 10 kg · CMC 500 mg 20 kg · CMC 1000 mg Mass (weights and mass standards) |
Internal procedure; At permanent location (S) | PTW-03 based on OIML R 111-1:2004 Annex C | |
| 6 | Mass standards and weights of accuracy class M₃ | Calibration — Mass (weights and mass standards) 1 g · CMC 3,0 mg 2 g · CMC 4,0 mg 5 g · CMC 5,0 mg 10 g · CMC 6,0 mg 20 g · CMC 8,0 mg 50 g · CMC 10 mg 100 g · CMC 16 mg 200 g · CMC 30 mg 500 g · CMC 80 mg 1 kg · CMC 160 mg 2 kg · CMC 300 mg 5 kg · CMC 800 mg 10 kg · CMC 1600 mg 20 kg · CMC 3000 mg Mass (weights and mass standards) |
Internal procedure; At permanent location (S) | PTW-03 based on OIML R 111-1:2004 Annex C | |
| 7 | Mass standards | Calibration — Mass (weights and mass standards) 25 kg · CMC 125 mg Mass (weights and mass standards) |
Internal procedure; At permanent location (S) | PTW-03 based on OIML R 111-1:2004 Annex C | |
| 8 | Mass standards | Calibration — Mass (weights and mass standards) 25 kg · CMC 350 mg Mass (weights and mass standards) |
Internal procedure; At permanent location (S) and outside of it (P) | PTW-03 based on OIML R 111-1:2004 Annex C | |
| 9 | Load weights | Calibration — Mass (weights and mass standards) up to 10 kg · CMC 1,6·10⁻⁴ % 10 kg to 25 kg · CMC 5·10⁻⁴ % Mass (weights and mass standards) |
Internal procedure; At permanent location (S) | PTW-03 based on OIML R 111-1:2004 Annex C | |
Reference standards (4)
EURAMET cg-18 v.4.0
OIML R 111-1:2004 Załącznik C
PTW-01
PTW-03