🇵🇱 Okręgowy Urząd Miar w Warszawie PL

PCA AP 081 • Warszawa, Poland • 44 calibration items

Metrology & calibration

Okręgowy Urząd Miar w Warszawie is a calibration laboratory accredited by PCA under number AP 081 (Warszawa, Poland). Its accreditation scope covers 44 calibration items in the following areas: Metrology & calibration. Calibrated items include: Multimeters, Calibrators, Digital voltmeters, Electrical thermometers (including electronic). Most frequently used calibration principles: Internal procedure; At permanent location (S), Internal procedure; At permanent location (S) and outside of it (P), Internal procedure; Using a class 1 proving device; Outside of perm….

At a glance

  • Accreditation number: PCA AP 081
  • Calibration items in scope: 44
  • Types of calibrated items: 44
  • Calibration principles used: 14
  • City: Warszawa, Poland
  • Valid until: 18-01-2030
Accreditation number
AP 081
Accreditation body
PCA
Address
ul. Elektoralna 4/6, 00-139 Warszawa
City
Warszawa, Poland
Division
Calibration Laboratories Group
Valid until
18-01-2030

What this laboratory calibrates (44)

Calibration principles (14)

Certificate information

Issue date
19.12.2025
Issue no.
21
Certificate date
17.02.2020
Accreditation cycle
19.12.2025 — 18.01.2030
Approved by
Katarzyna Wiśniewska

Accreditation scope — calibration items (44)

The uncertainty covered by the CMC is the expanded uncertainty with a coverage probability of approximately 95 % and is expressed in measurand units. The value of the uncertainty covered by the CMC expressed as a percentage is the relative measurement uncertainty and refers to the percentage share of the value of the measurand.

No. Calibrated quantity / subject of calibration Nominal range / parameters / CMC Calibration principle Calibration procedure
Calibration items
1 pH electrodes Calibration — pH
slope of the characteristic — 30,0 mV to 90,0 mV · CMC 0,5 mV electrode efficiency — 10,0 % to 103,0 % · CMC 0,9 % pH measurement for E=0 — 2,00 pH to 10,00 pH · CMC 0,03 pH
pH
Internal procedure; At permanent location (S) IW.6.S2.L2.7
2 pH meters Calibration — pH
0,000 pH to 14,000 pH · CMC 0,003 pH -1900,0 mV to 1900,0 mV · CMC 0,3 mV
pH
Internal procedure; Electrical method; At permanent location (S) IW.2.S2.L2.3
3 pH meters Calibration — pH
0,00 pH to 10,50 pH · CMC 0,04 pH 10,5 pH to 14,0 pH · CMC 0,3 pH
pH
Internal procedure; Method using reference materials; At permanent location (S) IW.6.S2.L2.7
4 Conductivity sensors
(K – conductivity cell constant)
Calibration — Specific electrical conductivity (conductometry)
0,05 cm⁻¹ to 10,0 cm⁻¹ · CMC 0,006 cm⁻¹
Specific electrical conductivity (conductometry)
Internal procedure; At permanent location (S) IW.7.S2.L2.7
5 Conductivity meters Calibration — Specific electrical conductivity (conductometry)
0,00002 S/m to 20,0 S/m · CMC 0,02 %
Specific electrical conductivity (conductometry)
Internal procedure; Electrical method; At permanent location (S) IW.3.S2.L2.4
6 Conductivity meters Calibration — Specific electrical conductivity (conductometry)
0,015 S/m to 0,15 S/m · CMC 0,3 % 0,15 S/m to 11,5 S/m · CMC 0,2 %
Specific electrical conductivity (conductometry)
Internal procedure; Method using reference materials; At permanent location (S) IW.7.S2.L2.7
7 Instruments for measuring the ethanol content of liquids Calibration — Volume fraction, mass fraction (liquid analysis)
0,00 % vol. to 100,00 % vol. · CMC 0,03 % vol.
Volume fraction, mass fraction (liquid analysis)
Internal procedure; Comparison method; At permanent location (S) and outside of it (P) IW.4.S2.L2.5
8 Hydrometers – alcoholometers
Hydrometers – saccharometers
Hydrometers – density hydrometers, including universal, for alcohol, mineral oils, milk
Hydrometers – salinometers
Hydrometers – thermometers built into thermohydrometers
Calibration — Density (liquid)
alcoholometers — 0 % to 100 % · CMC 0,05 % saccharometers — 0 % to 80 % · CMC 0,05 % density hydrometers — 0,600 g/cm³ to 2,000 g/cm³ · CMC 0,0001 g/cm³ salinometers — 0 kg/hl to 350 kg/hl · CMC 0,1 kg/hl thermometers built into thermohydrometers — -15 °C to 60 °C · CMC 0,2 °C
Density (liquid)
Internal procedure; Comparison method Hydrostatic weighing method; At permanent location (S) IW.1.S2.L2.1 IW.5.S2.L2.6
9 Oscillating density meters Calibration — Density (liquid)
0,600 g/cm³ to 1,600 g/cm³ · CMC 0,00004 g/cm³
Density (liquid)
Internal procedure; Comparison method or method using reference materials; At permanent location (S) and outside of it (P) IW.4.S2.L2.5
10 Gauge blocks (classes 0, 1, 2) Calibration — Length
0,5 mm to 100 mm · CMC Q[67; 0,94 · L] nm 125 mm to 500 mm · CMC Q[138; 0,9 · L] nm
Length
Internal procedure; Using a two-probe comparator; At permanent location (S) IW.1.S1.L1.1 based on PN-EN ISO 3650:2000
11 Semi-rigid rules
Rigid rules
Tape measures
Calibration — Length
semi-rigid rules — 0 m to 2 m · CMC (0,17 + 0,001 · L) mm rigid rules — 0 m to 5 m · CMC (0,17 + 0,02 · L) mm tape measures — 0 m to 25 m · CMC (0,25 + 0,01 · L) mm
Length
Internal procedure; At permanent location (S) IW.1.S1.L1.7
12 Digital voltmeters
Calibrators
Multimeters
Calibration — DC voltage
1 mV to 200 mV · CMC 0,00065 % 0,2 mV to 20 V · CMC 0,00043 % 20 V to 1000 V · CMC 0,0007 %
DC voltage
Internal procedure; At permanent location (S) IW.1.S8.L3.2 IW.1.S8.L3.11 based on EURAMET cg-15 v.3.0
13 Digital ammeters
Calibrators
Multimeters
Calibration — DC current
1 µA to 100 µA · CMC 0,6 % 100 µA to 1000 µA · CMC 0,007 % 1 mA to 20 mA · CMC 0,04 % 20 mA to 200 mA · CMC 0,006 % 0,2 A to 2 A · CMC 0,021 % 2 A to 10 A · CMC 0,055 %
DC current
Internal procedure; At permanent location (S) IW.1.S8.L3.2 IW.1.S8.L3.11 based on EURAMET cg-15 v.3.0
14 Digital voltmeters
Calibrators
Multimeters
Calibration — AC voltage
10 Hz to 40 Hz — 1 mV to 10 mV · CMC 0,5 % 10 Hz to 40 Hz — 10 mV to 200 mV · CMC 0,02 % 10 Hz to 40 Hz — 0,2 V to 200 V · CMC 0,015 % 40 Hz to 10 kHz — 1 mV to 2 mV · CMC 0,26 % 40 Hz to 10 kHz — 2 mV to 20 mV · CMC 0,04 % 40 Hz to 10 kHz — 20 mV to 200 mV · CMC 0,02 % 40 Hz to 10 kHz — 0,2 V to 1000 V · CMC 0,015 % 10 kHz to 30 kHz — 1 mV to 2 mV · CMC 0,29 % 10 kHz to 30 kHz — 2 mV to 200 mV · CMC 0,07 % 10 kHz to 30 kHz — 0,2 V to 20 V · CMC 0,02 % 10 kHz to 30 kHz — 20 V to 200 V · CMC 0,04 % 10 kHz to 30 kHz — 200 V to 1000 V · CMC 0,07 % 30 kHz to 100 kHz — 1 mV to 2 mV · CMC 0,50 % 30 kHz to 100 kHz — 2 mV to 200 mV · CMC 0,14 % 30 kHz to 100 kHz — 0,2 V to 20 V · CMC 0,05 % 30 kHz to 100 kHz — 20 V to 200 V · CMC 0,11 %
AC voltage
Internal procedure; At permanent location (S) IW.1.S8.L3.2 IW.1.S8.L3.11 based on EURAMET cg-15 v.3.0
15 Multimeters
Digital voltmeters
Calibration — AC voltage
100 kHz to 300 kHz — 0,2 V to 20 V · CMC 0,06 % 100 kHz to 300 kHz — 20 V to 200 V · CMC 0,22 %
AC voltage
Internal procedure; At permanent location (S) IW.1.S8.L3.2 based on EURAMET cg-15 v.3.0
16 Digital ammeters
Calibrators
Multimeters
Calibration — AC current
10 Hz to 40 Hz — 1 µA to 10 µA · CMC 0,27 % 10 Hz to 40 Hz — 10 µA to 200 mA · CMC 0,08 % 40 Hz to 1 kHz — 1 µA to 200 mA · CMC 0,08 % 40 Hz to 1 kHz — 0,2 A to 2 A · CMC 0,08 % 40 Hz to 1 kHz — 2 A to 10 A · CMC 0,12 % 1 kHz to 5 kHz — 1 µA to 200 mA · CMC 0,045 % 1 kHz to 5 kHz — 0,2 A to 2 A · CMC 0,35 % 1 kHz to 5 kHz — 2 A to 10 A · CMC 0,31 %
AC current
Internal procedure; At permanent location (S) IW.1.S8.L3.2 IW.1.S8.L3.11 based on EURAMET cg-15 v.3.0
17 Multimeters
Digital ohmmeters
Fixed resistors
Variable resistors
Bridges
Calibrators
Calibration — DC resistance
0,01 Ω to 2 Ω · CMC 0,0021 % 2 Ω to 20 Ω · CMC 0,0012 % 20 Ω to 200 kΩ · CMC 0,001 % 0,2 MΩ to 2 MΩ · CMC 0,0012 % 2 MΩ to 20 MΩ · CMC 0,003 % 20 MΩ to 200 MΩ · CMC 0,025 % 0,2 GΩ to 2 GΩ · CMC 0,29 %
DC resistance
Internal procedure; At permanent location (S) IW.1.S8.L3.2 W.1.S8.L3.11 based on EURAMET cg-15 v.3.0 IW.1.S8.L3.7
18 Mechanical stopwatches Calibration — Time (time interval)
for the relative increment of the stopwatch error in the interval -60 s/d to 60 s/d — 0 h to 1 h · CMC 0,06 s + 4·10⁻⁵·τ for the relative increment of the stopwatch error in the interval -120 s/d to -60 s/d, 60 s/d to 120 s/d — 0 h to 1 h · CMC 0,06 s + 8·10⁻⁵·τ
Time (time interval)
Internal procedure; At permanent location (S) IW.1.S9.L3.1
19 Electronic stopwatches Calibration — Time (time interval)
for the relative increment of the stopwatch error in the interval -60 s/d to 60 s/d — 0 h to 24 h · CMC 0,006 s + 5·10⁻⁷·τ for the relative increment of the stopwatch error in the interval -120 s/d to -60 s/d, 60 s/d to 120 s/d — 0 h to 24 h · CMC 0,006 s + 1·10⁻⁶·τ
Time (time interval)
Internal procedure; At permanent location (S) IW.1.S9.L3.3
20 Electrically controlled electronic stopwatches Calibration — Time (time interval)
0,001 s to 10000 s · CMC 6·10⁻⁶ s + 1·10⁻⁶·τ
Time (time interval)
Internal procedure; At permanent location (S) IW.1.S9.L3.4
21 Static testing machines Calibration — Force
for compressive forces, for tensile forces — 0,01 N to 120 N · CMC 0,08 %
Force
Internal procedure; Using standard weights; Outside of permanent location (P) IW.1.S6.L1.3
22 Static testing machines Calibration — Force
for compressive forces, for tensile forces — 5 N to 250 kN · CMC 0,13 %
Force
Internal procedure; Using a class 0.5 proving device; Outside of permanent location (P) IW.1.S6.L1.3
23 Static testing machines Calibration — Force
for compressive forces — 60 N to 3000 kN · CMC 0,25 % for tensile forces — 60 N to 100 kN · CMC 0,25 %
Force
Internal procedure; Using a class 1 proving device; Outside of permanent location (P) IW.1.S6.L1.3
24 Brinell hardness testers Calibration — Hardness
hardness — HBW 2,5 / 187,5 · CMC 2 % hardness — HBW 5 / 750 · CMC 2 % hardness — HBW 10 / 3000 · CMC 2 % force — 1839 N to 29420 N · CMC 0,25 % length — 0 mm to 1 mm · CMC 0,0005 mm length — 1 mm to 8 mm · CMC 0,0011 mm
Hardness
Internal procedure; Using a class 1 proving device; Outside of permanent location (P) IW.1.S6.L1.1 based on PN-EN ISO 6506-2:2019-10
25 Rockwell hardness testers Calibration — Hardness
hardness — HRA · CMC 0,6 HRA hardness — HRB · CMC 0,8 HRB hardness — HRC · CMC 0,6 HRC force — 98,07 N to 1471 N · CMC 0,25 % length — 20 µm to 180 µm · CMC 0,6 µm
Hardness
Internal procedure; Using a class 1 proving device; Outside of permanent location (P) IW.1.S6.L1.1 based on PN-EN ISO 6508-2:2024-06
26 Vickers hardness testers Calibration — Hardness
hardness - scales HV1, HV2, HV3, HV5, HV10, HV30 — below 225 HV · CMC 6 HV hardness - scales HV1, HV2, HV3, HV5, HV10, HV30 — 400 HV to 600 HV · CMC 11 HV hardness - scales HV1, HV2, HV3, HV5, HV10, HV30 — above 700 HV · CMC 17 HV force — 9,807 N to 294,2 N · CMC 0,25 % length — 0 mm to 1 mm · CMC 0,0005 mm
Hardness
Internal procedure; Using a class 1 proving device; Outside of permanent location (P) IW.1.S6.L1.1 based on PN-EN ISO 6507-2:2018-05
27 Rockwell diamond indenters Calibration — Hardness
difference of indications on hardness reference blocks — HRC · CMC 0,4 HRC tip angle — 0° to 150° · CMC 8´ length: tip radius — 0,18 mm to 0,22 mm · CMC 0,007 mm length: misalignment of the cone axis relative to the holder axis — 0 mm to 0,1 mm · CMC 0,007 mm length: height of the working part — 0 mm to 1,0 mm · CMC 0,009 mm
Hardness
Internal procedure; At permanent location (S) IW.1.S6.L1.5 based on PN-EN ISO 6508-2:2024-06
28 Mass standards and weights of accuracy class F1 Calibration — Mass (weights and mass standards)
1 mg, 2 mg, 5 mg, 10 mg · CMC 0,006 mg 20 mg, 50 mg, 100 mg · CMC 0,01 mg 200 mg, 500 mg, 1 g, 2 g · CMC 0,02 mg 5 g, 10 g · CMC 0,03 mg 20 g · CMC 0,05 mg 50 g, 100 g · CMC 0,10 mg 200 g · CMC 0,2 mg 500 g · CMC 0,5 mg 1 kg · CMC 1 mg 2 kg · CMC 3 mg 5 kg · CMC 5 mg 10 kg · CMC 10 mg 20 kg · CMC 25 mg 50 kg · CMC 50 mg
Mass (weights and mass standards)
Internal procedure; At permanent location (S) IW.1.S5.L1.1 based on OIML R-111-1:2004 Annex C
29 Mass standards and weights of accuracy class F2 Calibration — Mass (weights and mass standards)
1 mg, 2 mg, 5 mg, 10 mg · CMC 0,006 mg 20 mg, 50 mg, 100 mg · CMC 0,01 mg 200 mg, 500 mg, 1 g, 2 g · CMC 0,02 mg 5 g, 10 g · CMC 0,03 mg 20 g · CMC 0,05 mg 50 g, 100 g · CMC 0,10 mg 200 g · CMC 0,2 mg 500 g · CMC 0,5 mg 1 kg · CMC 1 mg 2 kg · CMC 3 mg 5 kg · CMC 5 mg 10 kg · CMC 10 mg 20 kg · CMC 25 mg 50 kg · CMC 50 mg
Mass (weights and mass standards)
Internal procedure; At permanent location (S) IW.1.S5.L1.1 based on OIML R-111-1:2004 Annex C
30 Mass standards and weights of accuracy class M1 Calibration — Mass (weights and mass standards)
1 mg, 2 mg, 5 mg, 10 mg · CMC 0,006 mg 20 mg, 50 mg, 100 mg · CMC 0,01 mg 200 mg, 500 mg, 1 g, 2 g · CMC 0,02 mg 5 g, 10 g · CMC 0,03 mg 20 g · CMC 0,05 mg 50 g, 100 g · CMC 0,10 mg 200 g · CMC 0,2 mg 500 g · CMC 0,5 mg 1 kg · CMC 1 mg 2 kg · CMC 3 mg 5 kg · CMC 5 mg 10 kg · CMC 10 mg 20 kg · CMC 25 mg 50 kg · CMC 50 mg
Mass (weights and mass standards)
Internal procedure; At permanent location (S) IW.1.S5.L1.1 based on OIML R-111-1:2004 Annex C
31 Spectrophotometers Calibration — Optical density of spectral transmittance
Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (0 mg/l): 0,0394 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (0 mg/l): 0,0413 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (0 mg/l): 0,0448 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (0 mg/l): 0,0486 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (20 mg/l): 0,2519 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (20 mg/l): 0,1394 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (20 mg/l): 0,3313 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (20 mg/l): 0,3001 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (40 mg/l): 0,4617 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (40 mg/l): 0,2332 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (40 mg/l): 0,6144 · CMC 0,0060 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (40 mg/l): 0,5450 · CMC 0,0060 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (60 mg/l): 0,6732 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (60 mg/l): 0,3258 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (60 mg/l): 0,8996 · CMC 0,0060 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (60 mg/l): 0,7865 · CMC 0,0060 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (80 mg/l): 0,8848 · CMC 0,0060 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (80 mg/l): 0,4217 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (80 mg/l): 1,1888 · CMC 0,0070 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (80 mg/l): 1,0355 · CMC 0,0070 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank ( 1000 mg/l): 1,1082 · CMC 0,0080 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank ( 1000 mg/l): 0,5230 · CMC 0,0060 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank ( 1000 mg/l): 1,4921 · CMC 0,0080 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank ( 1000 mg/l): 1,2946 · CMC 0,0080 Zakres widmowy 400 nm to 850 nm — 1,0 to 0,7 · CMC 0,0060 Zakres widmowy 400 nm to 850 nm — 0,7 to 0,5 · CMC 0,0060 Zakres widmowy 400 nm to 850 nm — 0,5 to 0,2 · CMC 0,0050 Zakres widmowy 400 nm to 850 nm — 0,2 to 0,1 · CMC 0,0050
Optical density of spectral transmittance
Internal procedure; At permanent location (S) and outside of it (P) IW.1.S10.L2.1
32 Spectrophotometers Calibration — Spectral transmittance
Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (0 mg/l): 0,9130 · CMC 0,0080 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (0 mg/l): 0,9087 · CMC 0,0080 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (0 mg/l): 0,9012 · CMC 0,0080 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (0 mg/l): 0,8926 · CMC 0,0080 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (20 mg/l): 0,5598 · CMC 0,0080 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (20 mg/l): 0,7250 · CMC 0,0080 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (20 mg/l): 0,4656 · CMC 0,0080 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (20 mg/l): 0,5002 · CMC 0,0080 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (40 mg/l): 0,3456 · CMC 0,0080 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (40 mg/l): 0,5842 · CMC 0,0080 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (40 mg/l): 0,2426 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (40 mg/l): 0,2845 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (60 mg/l): 0,2123 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (60 mg/l): 0,4721 · CMC 0,0080 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (60 mg/l): 0,1259 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (60 mg/l): 0,1636 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (80 mg/l): 0,1304 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (80 mg/l): 0,3785 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (80 mg/l): 0,0646 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (80 mg/l): 0,0919 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (100 mg/l): 0,0779 · CMC 0,0080 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (100 mg/l): 0,2998 · CMC 0,0080 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (100 mg/l): 0,0322 · CMC 0,0050 Liquid filters; Wavelength: (350, 313, 257, 235) nm; The values given are nominal values — PDC Blank (100 mg/l): 0,0508 · CMC 0,0050
Spectral transmittance
Internal procedure; At permanent location (S) and outside of it (P) IW.1.S10.L2.1
33 Spectrophotometers Calibration — Spectral transmittance
visible range (VIS) — 0,9 to 0,65 · CMC 0,0080 visible range (VIS) — 0,65 to 0,4 · CMC 0,0080 visible range (VIS) — 0,4 to 0,2 · CMC 0,0050 visible range (VIS) — 0,2 to 0,1 · CMC 0,0050 wavelength; Spectral half-width of the exit slit 1 nm — 275 nm to 850 nm · CMC 0,28 nm
Spectral transmittance
Internal procedure; At permanent location (S) and outside of it (P) IW.1.S10.L2.1
34 Electrical thermometers (including electronic) Calibration — Temperature (electrical thermometry)
-50 °C to 2 °C · CMC 0,04 °C 2 °C to 98 °C · CMC 0,03 °C 98 °C to 250 °C · CMC 0,05 °C 251 °C to 450 °C · CMC 0,08 °C
Temperature (electrical thermometry)
Internal procedure; Comparison method; At permanent location (S) IW.2.S4.L2.1
35 Electrical thermometers (including electronic) Calibration — Temperature (electrical thermometry)
-25 °C to 150 °C · CMC 0,1 °C
Temperature (electrical thermometry)
Internal procedure; Comparison method – calibration in a temperature calibrator; Outside of permanent location (P) IW.2.S4.L2.1
36 Electrical thermometers (including electronic) Calibration — Temperature (electrical thermometry)
14 °C to 30 °C · CMC 0,03 °C 30 °C to 71 °C · CMC 0,05 °C
Temperature (electrical thermometry)
Internal procedure; Comparison method – calibration of the temperature measurement channel of oscillating density meters; At permanent location (S) and outside of it (P) IW.2.S4.L2.1
37 Liquid-in-glass thermometers Calibration — Temperature (non-electrical thermometry)
0 °C · CMC 0,02 °C -50 °C to 250 °C · CMC 0,05 °C 250 °C to 400 °C · CMC 0,08 °C 400 °C to 450 °C · CMC 0,1 °C
Temperature (non-electrical thermometry)
Internal procedure; At permanent location (S) IW.1.S4.L2.1 based on OIML R 133:2002
38 Non-automatic electronic weighing instruments Calibration — Mass (weighing instruments)
up to 5 g · CMC 3,1 · 10⁻⁴ % 5 g to 50 g · CMC 1,1 · 10⁻⁴ % 50 g to 200 g · CMC 6,8 · 10⁻⁵ % 200 g to 500 g · CMC 7,7 · 10⁻⁵ % 500 g to 1000 g · CMC 2,1 · 10⁻⁴ % 1 kg to 5 kg · CMC 3,5 · 10⁻⁴ % 5 kg to 30 kg · CMC 6,0 · 10⁻⁴ % 30 kg to 150 kg · CMC 1,7 · 10⁻³ % 150 kg to 3000 kg · CMC 5,9 · 10⁻³ %
Mass (weighing instruments)
Internal procedure; At permanent location (S) and outside of it (P) IW.1.S5.WZ1.1 based on EURAMET cg-18 v.4.0
39 Mass standards of accuracy class M1
25 kg mass standards
Calibration — Mass (weights and mass standards)
10 kg · CMC 100 mg 20 kg · CMC 150 mg 25 kg · CMC 200 mg
Mass (weights and mass standards)
Internal procedure; At permanent location (S) and outside of it (P) IW.2.S5.WZ1.22 based on OIML R-111-1:2004 Annex C
40 Bourdon tube pressure gauges
Electronic pressure gauges
- gauge pressure
Calibration — Pressure
-0,09 MPa to 0 MPa · CMC 0,00009 MPa 0 MPa do 0,1 MPa · CMC 0,00009 MPa 0,1 MPa do 0,16 MPa · CMC 0,0001 MPa 0,16 MPa do 0,25 MPa · CMC 0,0002 MPa 0,25 MPa do 1 MPa · CMC 0,0004 MPa 1 MPa do 1,6 MPa · CMC 0,001 MPa 1,6 MPa do 2,5 MPa · CMC 0,002 MPa 2,5 MPa do 6 MPa · CMC 0,003 MPa 6 MPa to 16 MPa · CMC 0,01 MPa 16 MPa do 40 MPa · CMC 0,02 MPa 40 MPa do 60 MPa · CMC 0,03 MPa
Pressure
Internal procedure; At permanent location (S) IW.1.S3.WZ1.11 based on EURAMET cg-17 v.4.1
41 Mass standards of accuracy class M1 Calibration — Mass standards
500 kg · CMC 8g 1000 kg · CMC 16 g 2000 kg · CMC 30 g
Mass standards
Internal procedure; At permanent location (S) IW.2.S5.WZ4.1 based on OIML R-111-1:2004 Annex C
42 Non-automatic electronic weighing instruments Calibration — Mass (weighing instruments)
up to 5 g · CMC 3,1 · 10⁻⁴ % 5 g to 50 g · CMC 1,1 · 10⁻⁴ % 50 g to 200 g · CMC 6,8 · 10⁻⁵ % 200 g to 500 g · CMC 7,7 · 10⁻⁵ % 500 g to 1000 g · CMC 2,1 · 10⁻⁴ % 1 kg to 5 kg · CMC 3,5 · 10⁻⁴ % 5 kg to 30 kg · CMC 6,0 · 10⁻⁴ % 30 kg to 150 kg · CMC 1,7 · 10⁻³ % 150 kg to 3000 kg · CMC 5,9 · 10⁻³ % 3000 kg to 6000 kg · CMC 8,3 · 10⁻³ %
Mass (weighing instruments)
Internal procedure; At permanent location (S) and outside of it (P) IW.3.S5.WZ8.2 based on EURAMET cg-18 v.4.0
43 Mass standards and weights of accuracy class F2 Calibration — Mass (weights and mass standards)
1 mg, 2 mg, 5 mg · CMC 0,015 mg 10 mg · CMC 0,020 mg 20 mg · CMC 0,025 mg 50 mg · CMC 0,030 mg 100 mg · CMC 0,040 mg 200 mg, 500 mg · CMC 0,050 mg 1g · CMC 0,075 mg 2 g, 5 g · CMC 0,10 mg 10 g · CMC 0,15 mg 20 g · CMC 0,20 mg 50 g · CMC 0,25 mg 100 g · CMC 0,40 mg 200 g · CMC 0,75 mg 500 g · CMC 2,0 mg 1 kg · CMC 5,0 mg 2 kg · CMC 10 mg 5 kg · CMC 20 mg 10 kg · CMC 50 mg 20 kg · CMC 75 mg
Mass (weights and mass standards)
Internal procedure; At permanent location (S) IW.4.S5.WZ8.1 based on OIML R-111-1:2004 Annex C
44 Mass standards and weights of accuracy class M1
25 kg mass standards
Calibration — Mass (weights and mass standards)
1 mg, 2 mg, 5 mg, 10 mg · CMC 0,050 mg 20 mg · CMC 0,075 mg 50 mg, 100 mg · CMC 0,10 mg 200 mg · CMC 0,15 mg 500 mg · CMC 0,20 mg 1g · CMC 0,25 mg 2g · CMC 0,30 mg 5g · CMC 0,40 mg 10 g, 20 g · CMC 0,50 mg 50 g · CMC 0,75 mg 100 g · CMC 1,0 mg 200 g · CMC 2,5 mg 500 g · CMC 5,0 mg 1 kg · CMC 10 mg 2 kg · CMC 25 mg 5 kg · CMC 50 mg 10 kg · CMC 125 mg 20 kg · CMC 250 mg 25 kg · CMC 300 mg
Mass (weights and mass standards)
Internal procedure; At permanent location (S) IW.4.S5.WZ8.1 based on OIML R-111-1:2004 Annex C

Reference standards (38)

EURAMET cg-15 v.3.0
EURAMET cg-17 v.4.1
EURAMET cg-18 v.4.0
IW.1.S1.L1.1
IW.1.S1.L1.7
IW.1.S10.L2.1
IW.1.S2.L2.1
IW.1.S3.WZ1.11
IW.1.S4.L2.1
IW.1.S5.L1.1
IW.1.S5.WZ1.1
IW.1.S6.L1.1
IW.1.S6.L1.3
IW.1.S6.L1.5
IW.1.S8.L3.11
IW.1.S8.L3.2
IW.1.S8.L3.7
IW.1.S9.L3.1
IW.1.S9.L3.3
IW.1.S9.L3.4
IW.2.S2.L2.3
IW.2.S4.L2.1
IW.2.S5.WZ1.22
IW.2.S5.WZ4.1
IW.3.S2.L2.4
IW.3.S5.WZ8.2
IW.4.S2.L2.5
IW.4.S5.WZ8.1
IW.5.S2.L2.6
IW.6.S2.L2.7
IW.7.S2.L2.7
OIML R 133:2002
OIML R-111-1:2004 Załącznik C
PN-EN ISO 3650:2000
PN-EN ISO 6506-2:2019-10
PN-EN ISO 6507-2:2018-05
PN-EN ISO 6508-2:2024-06
W.1.S8.L3.11

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AP%20081