🇵🇱 APLAB Aparatura, Pomiary, Laboratoria Sp. z o.o. PL
Metrology & calibration
APLAB Aparatura, Pomiary, Laboratoria Sp. z o.o. is a calibration laboratory accredited by PCA under number AP 072 (Gdynia, Poland). Its accreditation scope covers 13 calibration items in the following areas: Metrology & calibration. Calibrated items include: Brinell hardness testers, Concrete compression testing machines, Rockwell hardness testers, Static testing machines. Most frequently used calibration principles: Outside of permanent location (P).
At a glance
- Accreditation number: PCA AP 072
- Calibration items in scope: 13
- Types of calibrated items: 10
- Calibration principles used: 1
- City: Gdynia, Poland
- Valid until: 11-01-2029
- Accreditation number
- AP 072
- Accreditation body
- PCA
- Address
- ul. Witomińska 26 m.3, 81-311 Gdynia
- City
- Gdynia, Poland
- Division
- APLAB Measurement Laboratory
- Valid until
- 11-01-2029
What this laboratory calibrates (10)
- Brinell hardness testers — 2 calibration items
- Concrete compression testing machines — 2 calibration items
- Rockwell hardness testers — 2 calibration items
- Static testing machines — 2 calibration items
- Vickers hardness testers — 2 calibration items
- Extensometers — 1 calibration item
- Process equipment, for compressive forces — 1 calibration item
- Process equipment, for tensile forces — 1 calibration item
- Static testing machines, for compressive forces — 1 calibration item
- Static testing machines, for tensile forces — 1 calibration item
Calibration principles (1)
- Outside of permanent location (P) — 13 calibration items
Certificate information
- Issue date
- 19.01.2026
- Issue no.
- 20
- Certificate date
- 21.10.2021
- Accreditation cycle
- 18.12.2024 — 11.01.2029
- Approved by
- Katarzyna Wiśniewska
Accreditation scope — calibration items (13)
| No. | Calibrated quantity / subject of calibration | Nominal range / parameters / CMC | Calibration principle | Calibration procedure | |
|---|---|---|---|---|---|
| Calibration items | |||||
| 1 | Extensometers | Calibration — Force 0,4 mm to 25 mm · CMC 0,8 % 10 mm to 1100 mm · CMC 0,2 % Force |
Outside of permanent location (P) | PN-EN ISO 9513:2013-06 | |
| 2 | Static testing machines, for tensile forces Process equipment, for tensile forces |
Calibration — Force 0,1 N to 500 kN · CMC 0,25 % Force |
Outside of permanent location (P) | PN-EN ISO 7500-1:2018 | |
| 3 | Static testing machines, for compressive forces Process equipment, for compressive forces |
Calibration — Force 0,1 N to 6 MN · CMC 0,25 % Force |
Outside of permanent location (P) | PN-EN ISO 7500-1:2018 | |
| 4 | Static testing machines | Calibration — Force - crosshead displacement (travel) — 10 mm to 1100 mm · CMC 0,2 % Force |
Outside of permanent location (P) | PN-EN ISO 9513:2013-06 | |
| 5 | Static testing machines | Calibration — Force - crosshead speed — 600 mm/min · CMC 0,2 % Force |
Outside of permanent location (P) | PN-EN ISO 5893:2015-12 ASTM E2658-15R23 | |
| 6 | Concrete compression testing machines | Calibration — Force 0,1 N to 6 MN · CMC 0,25 % Force |
Outside of permanent location (P) | PN-EN ISO 7500-1:2018 | |
| 7 | Concrete compression testing machines | Calibration — Force 200 kN · CMC 3% 400 kN to 2 MN · CMC 2% Force |
Outside of permanent location (P) | PN-EN 12390-4:2020-03 Annex A | |
| 8 | Brinell hardness testers | Calibration — Hardness - hardness; 10/3000 — 100 HB to 650 HBW · CMC 2,5 % - hardness; 10/1000 — 100 HB to 650 HBW · CMC 2,5 % - hardness; 2,5/187,5 — 80 HBW to 350 HBW · CMC 2,5 % - hardness; 5/750 — 80 HBW to 350 HBW · CMC 2,5 % - hardness; 1/5 — 80 HBW to 350 HBW · CMC 3,5 % - hardness; 1/10 — 80 HBW to 350 HBW · CMC 3,5 % - hardness; 1/30 — 100 HBW to 300 HBW · CMC 2,0 % - hardness; 2,5/31,25 — 80 HBW to 350 HBW · CMC 2,0 % - hardness; 2,5/62,5 — 80 HBW to 350 HBW · CMC 2,0 % - hardness; 5/250 — 80 HBW to 350 HBW · CMC 2,0 % - force — 9 N to 29420 N · CMC 0,25 % - cycle time — 1 s to 20 s · CMC 0,05 s - length — 0 mm to 1 mm · CMC 0,5 μm - length — 1 mm to 6 mm · CMC 1 μm Hardness |
Outside of permanent location (P) | PN-EN ISO 6506-2:2019 | |
| 9 | Brinell hardness testers | Calibration — Hardness - hardness; 10/3000 — 100 HB to 650 HB · CMC 2,5 % - hardness; 10/1000 — 100 HB to 650 HB · CMC 2,5 % - hardness; 2,5/187,5 — 80 HBW to 350 HBW · CMC 2,5 % - hardness; 5/750 — 80 HBW to 350 HBW · CMC 2,5 % - force — 1839 N to 29420 N · CMC 0,25 % - cycle time — 1 s to 20 s · CMC 0,05 s - length — 0 mm to 1 mm · CMC 0,5 μm - length — 1 mm to 6 mm · CMC 1 μm Hardness |
Outside of permanent location (P) | ASTM E10-23 | |
| 10 | Rockwell hardness testers | Calibration — Hardness - hardness — 20 HRA to 95 HRA · CMC 0,6 HRA - hardness — 10 HRB to 100 HRB · CMC 0,7 HRB - hardness — 10 HRC to 70 HRC · CMC 0,6 HRC - hardness — 55 HRE to 98 HRE · CMC 0,7 HRE - force — 1 N to 1471 N · CMC 0,25 % - cycle time — 1 s to 20 s · CMC 0,05 s Hardness |
Outside of permanent location (P) | PN-EN ISO 6508-2:2024-06 | |
| 11 | Rockwell hardness testers | Calibration — Hardness - hardness — 20 HRA to 95 HRA · CMC 0,6 HRA - hardness — 10 HRB to 100 HRB · CMC 0,7 HRB - hardness — 10 HRC to 70 HRC · CMC 0,6 HRC - hardness — 55 HRE to 98 HRE · CMC 0,7 HRE - hardness — HR15N · CMC 0,6 HR15N - hardness — HR15T · CMC 0,6 HR15T - hardness — HR15Y · CMC 0,6 HR15Y - force — 1 N to 1471 N · CMC 0,25 % - length — 20 μm to 250 μm · CMC 0,4 μm - cycle time — 0,1 s to 15 s · CMC 0,05 s Hardness |
Outside of permanent location (P) | ASTM E18-25 | |
| 12 | Vickers hardness testers | Calibration — Hardness - hardness — 100 HV 0,1 to 800 HV 0,1 · CMC 6% - hardness — 100 HV 0,2 to 800 HV 0,2 · CMC 6% - hardness — 100 HV 0,3 to 800 HV 0,3 · CMC 6% - hardness — 100 HV 0,5 to 800 HV 0,5 · CMC 4% - hardness — 100 HV 1 to 1000 HV 1 · CMC 3% - hardness — 100 HV 5 to 1000 HV 5 · CMC 2,5 % - hardness — 100 HV 10 to 1000 HV 10 · CMC 2,5 % - hardness — 100 HV 30 to 1000 HV 30 · CMC 2,5 % - force — 0,9807 N to 294,2 N · CMC 0,25 % - length — 0 mm to 0,35 mm · CMC 0,5 µm - length — 0,36 mm to 1,0 mm · CMC 0,15 % - cycle time — 1 s to 20 s · CMC 0,05 s Hardness |
Outside of permanent location (P) | PN-EN ISO 6507-2:2018 | |
| 13 | Vickers hardness testers | Calibration — Hardness - hardness — 100 HV 5 to 1000 HV 5 · CMC 2,5 % - hardness — 100 HV 10 to 1000 HV 10 · CMC 2,5 % - hardness — 100 HV 30 to 1000 HV 30 · CMC 2,5 % - force — 0,9807 N to 294,2 N · CMC 0,25 % - length — 0 mm to 0,35 mm · CMC 0,5 µm - length — 0,36 mm to 1,0 mm · CMC 0,15 % - cycle time — 1 s to 20 s · CMC 0,05 s Hardness |
Outside of permanent location (P) | ASTM E92-23 | |
Reference standards (11)
ASTM E10-23
ASTM E18-25
ASTM E2658-15R23
ASTM E92-23
PN-EN 12390-4:2020-03 Annex A
PN-EN ISO 5893:2015-12
PN-EN ISO 6506-2:2019
PN-EN ISO 6507-2:2018
PN-EN ISO 6508-2:2024-06
PN-EN ISO 7500-1:2018
PN-EN ISO 9513:2013-06